QLC PLUS, BCF2000 and LC2412

---

THIS HOWTO WAS INTEGRATED TO ONLINE HELP, AND IS KEPT HERE SO THAT OLD LINKS WORK. PLEASE REFER TO ONLINE HELP FOR CURRENT VERSION.

---

This is small howto to setup QLC+ remote control with Behringer LC2412 connected through BCF2000. Everything said here is also valid for BCR2000.

With this setup (BCF2000 + LC2412) we get:

• 8 motorized faders
• 8 turn encoders
• 30 non-motorized faders
• lots of buttons

That makes a pretty nice console and a much less clicks with mouse :)

Now the steps:

1. Connect MIDI cable from LC2412 MIDI out to MIDI IN on BCF2000. Connect USB cable from BCF2000 to the computer.
2. Set BCF2000 to U-2 mode
   • Press and hold EDIT and then push STORE.
   • Release both buttons.
   • Turn the leftmost encoder until it shows u-2.
   • Push EXIT button.
3. Start QLC+
4. In the INPUT/OUTPUTs tab:
   • For one universe, choose BCF2000 MIDI 1 port; check both "input" and "feedback", and select BCF2000 profile
   • For another universe, choose BCF2000 MIDI 2 port; check "input" only - LC2412 does not have feedback capability. Choose LC2412 profile.
5. Now you can choose from knobs, faders and buttons of either device for your VC controls.

Enjoy!