Tested on M02s (Does boot on A02s but careful flashing GSIs according to this issue: #5 , Edit: actually the issue might have been caused by gapps being flashed later according to this post and this one too) So if anyone else has also tried and has prior knowledge related to flashing, pls open an issue, i'll just remove the text after recieving some clarity abt. the issue (and once pls read the issue referred to above before trying)
Check the releases and this XDA thread for instructions
Thanks to everyone who helped and whose repositories I've used
base-tree -> https://github.com/ravindu644/twrp_galaxy_m02s
Kernel-source -> https://gitlab.com/mlmstudios1/m02s-kernel
The touch doesnt work on inital boot but it works after turning the screen off for 5secs and then turning the screen on (maybe twice or thrice to verify).
If you are not able to get it to load to twrp, flash any disabled vbmeta.img for the device instead of the google's null vbmeta.img
Stock files (recovery.img.lz4, dtbo.img, boot.img): https://github.com/mlm-games/twrp_galaxy_m02s/releases/tag/v3.7.1-0.2
| Device Info | Specification |
|---|---|
| Device Name | Samsung Galaxy M02s |
| Model Number | SM-M025F, SM-M025M, SM-M025G |
| Codename | m02s |
| SoC (Chipset) | Qualcomm Snapdragon 450 (SDM450) |
| CPU | Octa-core 1.8 GHz Cortex-A53 |
| GPU | Adreno 506 |
| RAM | 3 GB / 4 GB |
| Storage | 32 GB / 64 GB internal storage |
| MicroSD | microSDXC support (dedicated slot) |
| Battery | Non-removable Li-Po 5000 mAh battery |
| Display | 6.5 inches PLS IPS LCD, 720 x 1600 pixels (~270 ppi) |
| Rear Camera | Triple: 13 MP (wide), 2 MP (macro), 2 MP (depth) |
| Front Camera | 5 MP |
| Android OS | Android 10 with One UI Core 2.5 |
| Release Date | January 2021 |
- Full touch support
- Backup and restore capabilities
- Flashing of zip and image files
- ADB access in recovery mode
- MTP support for file transfers
- Advanced features such as Terminal, File Manager, and more
- ✅ Booting into recovery
- ✅ Touchscreen functionality
- ✅ Mounting of all partitions
- ✅ ADB and MTP access
- ✅ Flashing of zip and image files
- ✅ Backup and restore functions
- ✅ Battery level display
- ❌ Decryption Issues: May have problems decrypting data if encryption is enforced by the stock firmware
- ❌ SELinux: Needs to be set to permissive for certain operations
- ❌ Additional Issues: Please report any bugs or issues encountered
Warning: Installing custom recovery and modifying your device can void your warranty and may result in device malfunctions if not done properly. Proceed at your own risk. Neither the developers nor anyone else is responsible for any damage that may occur to your device by using this software.
- Unlocked Bootloader: Instructions here
- Odin Flash Tool: Download Odin v3.14.1
- Samsung USB Drivers: Download
- USB Cable: Original or compatible USB cable for data transfer
- TWRP Image File: Download the recovery image from the Downloads section
- Disable DM-Verity and Force Encryption Zip:
- Go to Settings > About phone > Software information
- Tap on Build number seven times until it says "Developer mode has been turned on"
- Go back to Settings > Developer options
- Enable OEM unlocking and USB debugging
Note: Unlocking the bootloader will erase all data on your device.
- Turn off your device.
- Boot into Download Mode:
- Press and hold Volume Up and Volume Down buttons simultaneously.
- While holding them, connect your device to the PC using a USB cable.
- Release the buttons when you see the Warning screen.
- On the Warning screen, press and hold the Volume Up button to enter the device unlock mode.
- Read the warning carefully, then press the Volume Up button to confirm and unlock the bootloader.
- Note: After unlocking, the device will reset. Set it up and re-enable USB debugging and OEM unlocking.
- Download and install Samsung USB Drivers on your PC.
- Download Odin and extract the ZIP file.
- Place the downloaded
twrp.img.tarfile in a convenient location. - Boot your device into Download Mode again.
- Launch Odin on your PC.
- In Odin, click on the Options tab and uncheck Auto Reboot.
- Click on the AP button and select the
twrp.img.tarfile. - Click Start to begin flashing.
- Once the process completes and you see a PASS message, disconnect your device.
- Important: Do not boot into the system yet.
- Immediately boot into recovery:
- Press and hold Volume Up and Power buttons simultaneously.
- Release the Power button when the Samsung logo appears but keep holding Volume Up until TWRP loads.
- For Force Encyption -> In TWRP, swipe to allow modifications if prompted.
- Go to Advanced -> Terminal -> type multidisabler and click the tick mark on the keyboard (you know what i mean)
- Go to Wipe > Format Data, type
yesto confirm. - Reboot into recovery again to ensure everything is working.
- Reboot your device into the system:
- Go to Reboot > System in TWRP.
- Disable DM-Verity: Reference Link
To build TWRP for the Samsung Galaxy M02s (m02s), follow the steps below.
- Operating System: Linux (Ubuntu 18.04/20.04 recommended)
- Required Tools: Git, Repo tool, Java Development Kit (OpenJDK 8), ADB and Fastboot
- Disk Space: At least 100 GB free
- RAM: Minimum 8 GB recommended
- Internet Connection: Stable and fast for downloading source code
sudo apt-get update
sudo apt-get install git-core repo gnupg flex bison gperf build-essential zip curl zlib1g-dev \
gcc-multilib g++-multilib libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev \
lib32z-dev ccache libgl1-mesa-dev libxml2-utils xsltproc unzip pythonmkdir -p ~/bin
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
export PATH=~/bin:$PATHAdd the above export PATH line to your ~/.bashrc or ~/.profile to make it persistent.
mkdir twrp-m02s
cd twrp-m02s
repo init -u https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni.git -b twrp-12.1repo sync -j$(nproc --all)git clone https://github.com/mlm-games (or) TeamWin/android_device_samsung_m02s.git -b twrp device/samsung/m02ssource build/envsetup.shlunch omni_m02s-engmka recoveryimage-
After the build completes successfully, find the recovery image at:
out/target/product/m02s/recovery.img -
If needed, create a
.tarfile for Odin:cd out/target/product/m02s/ tar -H ustar -c recovery.img > recovery.tar
- Team Win Recovery Project for their exceptional recovery project
- Samsung Open Source Release Center for kernel sources
- Community Contributors who provided support and resources
- XDA Thread: Look above
- Official TWRP Site: TeamWin - TWRP
- Samsung Firmware Download: SamMobile
- Backup: Always make a full backup of your current system before flashing any custom ROMs or mods.
Disclaimer: Installing custom recovery and modifying your device involves risks. Proceed at your own risk. Neither the developers nor anyone else is responsible for any damage that may occur to your device by using this software.
You may need to factory reset or wipe data after using multidisabler and flashing magisk.zip (renaming the apk). Do not reboot after flashing magisk and factory resetting before checking for the "bootloader is already unlocked" text in developer options.
Look at this link and this link for qdl (for flashing in edl mode source code and what it needs from the device) to compile for fixing a device stuck in EDL mode. Example