content: add bootloader relocking guide

content/english/guides/relock-bootloader.md

@@ -0,0 +1,81 @@
+---
+title: 'Bootloader Relocking Guide for Motorola G32(devon), G42(hawao) and G52(rhode)'
+meta-title: 'Bootloader Relocking Guide for Motorola G32(devon), G42(hawao) and G52(rhode)'
+description: 'Bootloader Relocking Guide for Motorola devices with Snapdragon 680 chipset like G32(codename devon), G42(codename hawao) and G52(codename rhode)'
+data: '2023-12-13T23:07:19+05:30'
+image: "/images/image-placeholder.png"
+author: "Motorola Snapdragon 680 Community"
+categories: []
+tags: []
+draft: false
+type: blog
+---
+
+## Disclaimer
+
+{{< notice "warning" >}}
+
+**DO NOT SKIP, CHANGE OR MODIFY ANY OF THE STEPS, THERE'S 
+HIGH POSSIBILITY OF HARD BRICKING YOUR DEVICE WITH NO WAY TO RECOVER IF YOU MISS ANY STEP.**
+
+There are other methods to flash firmware and relock but this is what I use and trust.
+
+{{< /notice >}}
+
+## Instructions
+
+So the first order of step would be to go to fastboot mode and find out the software channel of the device
+You can achieve this by the following command:-
+
+```bash
+fastboot getvar ro.carrier
+```
+
+It'll return the region of your device, In my case it was retin
+
+```bash
+(bootloader) ro.carrier: retin
+```
+
+
+Now we will go to the below link,
+
+{{<button label="Firmware" link="https://mirrors.lolinet.com/firmware/motorola/rhode/official/">}}
+
+And download the latest available firmware for your device and software channel, Make sure to download the correct region only
+
+After downloading it extract the zip
+
+
+Then download tinyfastbootscript (en version)
+
+{{<button label="TinyFastbootScript" link="https://mirrors.lolinet.com/software/windows/TinyFastbootScript/">}}
+
+After downloading extract the tinyfastbootscript zip and move the two files inside to the extracted stock rom folder
+
+
+After that is complete connect your device in fastboot mode then open the flash.bat program inside the stock rom folder
+
+On initial setup it'll ask for fastboot version (select the default moto fastboot, Option 1)
+
+Then it'll ask for flashing then select option 5 (flash full firmware with factory reset)
+
+After firmware is flashed reboot device wait till it reaches hello screen on setup
+
+{{< notice "warning" >}}
+
+Again, Only do it when you're 100% sure the firmware is of correct region and latest available otherwise you'll have a unrecoverable hard brick.
+
+{{< /notice >}}
+
+Then you can go into fastboot to relock the bootloader using the following command.
+
+```bash
+fastboot oem lock
+```
+
+It'll relock and do factory reset, After that you can reboot and enjoy.
+
+## Results
+
+{{< gallery dir="images/relock-bootloader" zoomable="true" command="Fit" >}}