Skip to content

Leave Blank v22.03.1
Compare
Choose a tag to compare
@nicholas-opensource nicholas-opensource released this 12 Oct 17:10
· 105 commits to main since this release
2.1
57a90e6
This commit was signed with the committer’s verified signature.
nicholas-opensource Nicholas Sun
GPG key ID: 12238DCDAE09F3A7
Learn about vigilant mode.

Stable Release

Version: OpenWrt v22.03.1
Kernel: 5.10.146
SquashFS Only
View the ReadMe for more details
Opkg vermagic matched with OpenWrt v22.03.1 manifest ( You can install the software as if you have AppStore~ )

  • Segmentation faults may appear, which are caused by OpenWrt upstream. The same problem occurs with the OpenWrt releases. Thanks you very much for giving feedbacks on the segmentation fault packages with error logs

Important notices:
v22.03.1 has made huge changes from the previous v21.02 version, using firewall4 based on nftables for the first time
Release note of v22.03.0 and v22.03.1
Many devices are supported, including NanoPi R4S
The huge changes have also brought new issues of compatibility, and the reason for such a late release was to bring decent stability. The current release is ready for everyday use
Remove Sino version until a good open source environment is available in China

Changelogs and features:
Update Linux kernel from 5.4.188 to 5.10.146
Backport MG-LRU to OpenWrt k5.10
Use nftables by default and implement firewall4 fullcone-nat and fullcone-nat6 ( Although I think nat6 is stupid )
Enable flow_offloading by default, fixed Apple Push Notification service TCP port 5223 issues
Add package: luci-app-upnp with miniupnpd-nftables , Openwrt upstream had problems adapting, so the fixed version was added. Thanks to msylgj
Add support for phone USB hotspot sharing, both for Android and iPhone
Add new device support: NanoPi-R4S

X86:
Support more NICs by default:

  • Intel: e1000, e1000e, ixgbe, igb, igc, i40e
  • Broadcom: tg3
  • Realtek: r8125, r8169

NanoPi:
Add irqbalance by default
Return to kernel version of r8152 driver for NanoPi-R2S
Remove NanoPi-R4S RK3399 thermal throttle limit ( Default at 70°C, it is too low ), and overclock by default. Use at your own risk
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command cputemp to display information about SoC frequency and temperature
Optional pwm fan control ( Release version does not contain )

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Assets 5
Loading