Leave Blank v22.03.2

Stable Release

Version: OpenWrt v22.03.2
Kernel: 5.10.146
SquashFS Only
View the ReadMe for more details
Opkg vermagic matched with OpenWrt v22.03.2 manifest ( You can install the software as if you have AppStore~ )

• Segmentation faults may appear, which are caused by OpenWrt upstream. The same problem occurs with the OpenWrt releases. Thanks you very much for giving feedbacks on the segmentation fault packages with error logs

For details of the v22.03 releases, please refer to the first release note of v22.03.1

Changelogs and features:
mac80211/cfg80211: Security fixes for BSSID parsing (CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721 and CVE-2022-42722)
Firewall4: Bump to 20221018

X86:
Support more NICs by default:

• Intel: e1000, e1000e, ixgbe, igb, igc, i40e
• Broadcom: tg3
• Realtek: r8125, r8169

NanoPi:
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command cputemp to display information about SoC frequency and temperature
Optional pwm fan control ( Release version does not contain )

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v22.03.1

Stable Release

Version: OpenWrt v22.03.1
Kernel: 5.10.146
SquashFS Only
View the ReadMe for more details
Opkg vermagic matched with OpenWrt v22.03.1 manifest ( You can install the software as if you have AppStore~ )

• Segmentation faults may appear, which are caused by OpenWrt upstream. The same problem occurs with the OpenWrt releases. Thanks you very much for giving feedbacks on the segmentation fault packages with error logs

Important notices:
v22.03.1 has made huge changes from the previous v21.02 version, using firewall4 based on nftables for the first time
Release note of v22.03.0 and v22.03.1
Many devices are supported, including NanoPi R4S
The huge changes have also brought new issues of compatibility, and the reason for such a late release was to bring decent stability. The current release is ready for everyday use
Remove Sino version until a good open source environment is available in China

Changelogs and features:
Update Linux kernel from 5.4.188 to 5.10.146
Backport MG-LRU to OpenWrt k5.10
Use nftables by default and implement firewall4 fullcone-nat and fullcone-nat6 ( Although I think nat6 is stupid )
Enable flow_offloading by default, fixed Apple Push Notification service TCP port 5223 issues
Add package: luci-app-upnp with miniupnpd-nftables , Openwrt upstream had problems adapting, so the fixed version was added. Thanks to msylgj
Add support for phone USB hotspot sharing, both for Android and iPhone
Add new device support: NanoPi-R4S

X86:
Support more NICs by default:

• Intel: e1000, e1000e, ixgbe, igb, igc, i40e
• Broadcom: tg3
• Realtek: r8125, r8169

NanoPi:
Add irqbalance by default
Return to kernel version of r8152 driver for NanoPi-R2S
Remove NanoPi-R4S RK3399 thermal throttle limit ( Default at 70°C, it is too low ), and overclock by default. Use at your own risk
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command cputemp to display information about SoC frequency and temperature
Optional pwm fan control ( Release version does not contain )

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.3

Stable Release

Version: OpenWrt v21.02.3
Kernel: 5.4.188
SquashFS Only
View the ReadMe for more details
Opkg vermagic matched with OpenWrt v21.02.3 manifest ( You can install the software as if you have AppStore~ )
The opkg software source was replaced with the mirror site of SJTU ( Sino Version Only ) +1s👓
Simplified Chinese supported

Important notices:
v21.02.3 will probably be the last branch 21.02 release of this repository. I will migrate to the branch 22.03 soon
But will not enable firewall4 based on nftables, because there are still a lot of unfixable bugs

Changelogs and features:
Update Linux kernel from 5.4.179 to 5.4.188
Update openssl from 1.1.1m to 1.1.1n and fix security problem (CVE-2022-0778)

X86:
No specific major updates

R2S:
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command /bin/cputemp.sh to display information about SoC frequency and temperature
Optional pwm fan control (Release version does not contain)

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.2

Stable Release

Version: OpenWrt v21.02.2
Kernel: 5.4.179
SquashFS Only
See the ReadMe for more details
Opkg vermagic matched with OpenWrt v21.02.2 manifest ( You can install the software as if you have AppStore~ )
The opkg software source was replaced with the mirror site of SJTU ( BingBing Version Only ) +1s👓
Simplified Chinese supported

Join the discussion of v2raya #24

Changelogs and features:
Kernel: Bump to 5.4.179
Upgrade luci-theme-bootstrap, it comes with new looks and dark mode
Fix to enable cron log level pr#345 of YAOF

X86:
No specific major updates

R2S:
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command /bin/cputemp.sh to display information about SoC frequency and temperature
Optional pwm fan control (Release version does not contain)

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.1

First Stable Release

Version: OpenWrt v21.02.1
Kernel: 5.4.154
SquashFS Only
See the ReadMe for more details
Opkg vermagic matched with OpenWrt v21.02.1 manifest ( You can install the software as if you have AppStore~ )
The opkg software source was replaced with the mirror site of SJTU ( BingBing Version Only ) +1s👓
Simplified Chinese supported

Changelogs and features:
Kernel: Bump to 5.4.154
Fix firewall3 restart issues
Disabled kernel mitigations
Remove kmod-tcp-bbr, bbr will cause the abnormal inbound speed rate. Revert to cubic as the default tcp congestion control
Disabling soft offloading by default. It may cause NAT performance cannot reach 1000Mb/s or has a higher occupancy rate, you can turn on kernel flow offloading at the LuCI page Network--Firewall--Software flow offloading ( Reboot required )
Details: https://github.com/nicholas-opensource/OpenWrt-Autobuild/releases/tag/1.0-beta4

X86:
No specific major updates

R2S:
Fix sysupgrade for Rockchip target when using squashfs
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command /bin/cputemp.sh to display information about SoC frequency and temperature
Optional pwm fan control (Release version does not contain)

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.0

First Stable Release

Version: OpenWrt v21.02.0
Kernel: 5.4.143
SquashFS Only
See the ReadMe for more details
Opkg vermagic matched with OpenWrt v21.02.0 manifest ( You can install the software as if you have AppStore~ )
The opkg software source was replaced with the mirror site of SJTU ( BingBing Version Only ) +1s👓
Simplified Chinese supported

Changelogs and features:
Kernel: Bump to 5.4.143
OpenSSL: Bump to 1.1.1l
Golang: Bump to 1.17
Remove kmod-tcp-bbr, bbr will cause the abnormal inbound speed rate. Revert to cubic as the default tcp congestion control
Disabling soft offloading by default. It may cause NAT performance cannot reach 1000Mb/s or has a higher occupancy rate, you can turn on kernel flow offloading at the LuCI page Network--Firewall--Software flow offloading ( Reboot required )
Details: https://github.com/nicholas-opensource/OpenWrt-Autobuild/releases/tag/1.0-beta4

X86:
No specific major updates

R2S:
Optimize GCC cflags
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command /bin/cputemp.sh to display information about SoC frequency and temperature
Optional pwm fan control (Release version does not contain)

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.0-rc4

The problem of opkg in version 0802 has been fixed

Version: OpenWrt v21.02.0-rc4
Kernel: 5.4.137
SquashFS Only
See the ReadMe for more details
Opkg vermagic matched with OpenWrt v21.02.0-rc4 manifest ( You can install the software as if you have AppStore~ )
The opkg software source was replaced with the mirror site of SJTU ( BingBing Version Only ) +1s👓
Simplified Chinese supported

Changelogs and features:
Kernel: Bump to 5.4.137
Many software has been updated to the latest version because it is a long time since the last version

Remove Qualcomm Shortcut-FE, because it will cause nearly 40% UDP packet loss. Now build-in kernel soft offloading, but it is disabled by default. Disabling soft offloading may cause NAT performance cannot reach 1000Mb/s or has a higher occupancy rate, you can turn on kernel flow offloading at the LuCI page Network--Firewall--Software flow offloading ( Reboot required )
Turning on soft offloading will cause some user service errors, like Apple Push Notification Service (aka APNS) and an official openwrt known issue: "Some packets are getting dropped in software and hardware flow offloading from IPv6 streams." Details: https://openwrt.org/releases/21.02/notes-21.02.0-rc4
Decide for yourself whether to open soft offloading and you better understand netfilter, soft offloading, jitter, NAT latency, etc.

Drop QUIC/http3 proxy in SSRP ( BingBing Version Only )
Remove many useless Kconfig crypto options

X86:
No specific major updates

R2S:
Optimize GCC cflags
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command /bin/cputemp.sh to display information about SoC frequency and temperature
Optional pwm fan control (Release version does not contain)

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S/R4S Club

Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.0-rc3 Fixed

Bug Fixed Edition: Fixed previous release bugs, and it has been cancelled
Revert dropbear default interface setting. It cannot be used by default
Fix the ShadowsocksR.orig error of BingBing version

Version: OpenWrt v21.02.0-rc3
Kernel: 5.4.124
SquashFS Only
See the ReadMe for more details
Opkg vermagic matched with OpenWrt v21.02.0-rc3 manifest ( You can install the software as if you have AppStore~ )
The opkg software source was replaced with the mirror site of SJTU ( BingBing version only ) +1s👓
Qualcomm Shortcut-FE was supported now and enabled by default. This is to solve the Apple apns push problem caused by Linux kernel offloading
CAUTION: No conflict detection
Simplified Chinese supported

Changelogs and features:
Kernel: Bump to 5.4.124
Shadowsocks-rust: Bump to 1.11.1
Remove ShadowsocksR server. It's hazardous and in a bad state of disrepair

X86:
Enable Fusion-MPT SAS driver

R2S:
Arm-trusted-firmware-rk3328: Update to latest git HEAD
Optional pwm fan control (Release version does not contain)
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command /bin/cputemp.sh to display information about SoC frequency and temperature
Replace Shadowsocks-libev-server with Shadowsocks-rust-server for better performance and security

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S Club
NanoPi R4S Club
Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.0-rc3

OpenWrt v21.02.0-rc3 has released!

This is a Bug Version
Please do not use this version, the repaired version has been released.
The release files are destroyed

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S Club
NanoPi R4S Club
Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~

Leave Blank v21.02.0-rc2

OpenWrt v21.02.0-rc2 has released!

#StopAsianHate
#AsianLivesMatter
#Stand4Asian
#EndRacism

Version: OpenWrt v21.02.0-rc2
Kernel: 5.4.119
SquashFS Only
See the ReadMe for more details
Opkg vermagic matched with OpenWrt v21.02.0-rc2 manifest ( You can install the software as if you have AppStore~ )
The opkg software source was replaced with the mirror site of SJTU ( BingBing version only ) +1s👓
Qualcomm Shortcut-FE was supported now and enabled by default. This is to solve the Apple apns push problem caused by Linux kernel offloading
CAUTION: No conflict detection
Simplified Chinese supported

Changelogs and features:
Kernel: Bump to 5.4.119
The first release of OpenWrt v21.02.0-rc2, with permanent update sources
Match the kernel vermagic with the official manifest
New DSA device VLAN LuCI pages are available
Revert Bridge-LAN MTU to 1500

X86:
Shadowsocks is conservatively stayed in the libev version of mbedTLS

R2S:
Support command fuck to reset with keeping basic settings or firstboot -y && reboot now to reset immediately, besides the reset button is activated
Support TF card with a minimum size of 512MB
Support command /bin/cputemp.sh to display information about SoC frequency and temperature
Replace Shadowsocks-libev-server with Shadowsocks-rust-server for better performance and security
Remove ShadowsocksR server. It's hazardous and in a bad state of disrepair

If you have a problem:
OpenWrt guides and documentation
Discussions
Report a issue
Telegram Group:
NanoPi R2S Club
NanoPi R4S Club
Thank ImmortalWrt and OpenWrt and special thanks to QiuSimons

Enjoy~