PPPwnUI

PPPwnUI is a program that adds an UI to the exploit PPPwn created by TheFlow.

Installation

• Clone the repository:

git clone https://github.com/B-Dem/PPPwnUI

• Install the requirements:

pip install -r requirements.txt

Usage

• Launch the app with

python PPPwnUI.py

• Select your Interface using the drop-down menu

• Choose your Firmware (7.50, 7.51, 7.55, 8.00, 8.01, 8.03, 8.50, 8.52, 9.00, 9.03, 9.04, 9.50, 9.51, 9.60, 10.00, 10.01, 10.50, 10.70, 10.71 or 11.00)

• Or Choose the Goldhen PPPwn (9.00 & 11.00)

• You can also add your own custom Payloads.

• Click on Start PPPwn to start the Exploit

PPPwn Usage

On your PS4:

• Go to Settings and then Network
• Select Set Up Internet connection and choose Use a LAN Cable
• Choose Custom setup and choose PPPoE for IP Address Settings
• Enter anything for PPPoE User ID and PPPoE Pasword
• Choose Automatic for DNS Settings and MTU Settings
• Choose Do Not Use for Proxy Server
• Click Test Internet Connection to communicate with your computer

If the exploit fails or the PS4 crashes, you can skip the internet setup and simply click on Test Internet Connection. If the script fail or is stuck waiting for a request/response, abort it and run it again on your computer, and then click on Test Internet Connection on your PS4.

Goldhen Usage

On your Computer:

• Copy goldhen.bin to the root directory of an exfat/fat32 USB and insert it into your PS4.

Example run

[+] PPPwn - PlayStation 4 PPPoE RCE by theflow
[+] args: interface=enp0s3 fw=1100 stage1=stage1/stage1.bin stage2=stage2/stage2.bin

[+] STAGE 0: Initialization
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 07:ba:be:34:d6:ab
[+] AC cookie length: 0x4e0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[*] Waiting for interface to be ready...
[+] Target IPv6: fe80::2d9:d1ff:febc:83e4
[+] Heap grooming...done

[+] STAGE 1: Memory corruption
[+] Pinning to CPU 0...done
[*] Sending malicious LCP configure request...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[+] Scanning for corrupted object...found fe80::0fdf:4141:4141:4141

[+] STAGE 2: KASLR defeat
[*] Defeating KASLR...
[+] pppoe_softc_list: 0xffffffff884de578
[+] kaslr_offset: 0x3ffc000

[+] STAGE 3: Remote code execution
[*] Sending LCP terminate request...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 97:df:ea:86:ff:ff
[+] AC cookie length: 0x511
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Triggering code execution...
[*] Waiting for stage1 to resume...
[*] Sending PADT...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634be9200
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] AC cookie length: 0x0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...

[+] STAGE 4: Arbitrary payload execution
[*] Sending stage2 payload...
[+] Done!

To do :

• Auto Updater
• PPPwn Logs in the program directly
• Code optimisation

This Program was made with ❤️ by Memz for Sighya.

If you find this program helpful, leave a star on the repo!

And if you got any feedback, open an issues !