A lot of things added or fixed :-)

.vscode/launch.json

@@ -12,7 +12,7 @@
       "type": "node"
     },
     {
-      "command": "dev-server watch",
+      "command": "dev-server watch default",
       "name": "Start Dev Server",
       "request": "launch",
       "type": "node-terminal"

README.md

@@ -19,21 +19,20 @@ You can read more about the API here: https://github.com/Zendure/developer-devic
 ## Features
 
 - Get all telemetry data from your Solarflow devices, also those not visible in the offical app - like battery voltage
-- Control your Solarflow HUB like in the offical app. Most of the settings are available. 
+- Control your Solarflow HUB like in the offical app. Most of the settings are available.
 - Control the output limit - you are not limited to use a Shelly Pro EM to realize a zero feed-in. You can also design more complex scenarios via script or blockly in ioBroker.
-- Stop input if one battery drops into low voltage (battery protect). Only working when settings the output limit other the adapter
+- Stop input if one battery drops into low voltage (battery protect). Works only when setting the output limit via the adapter
 - Control more than one Solarflow at the same time!
 - Get more precise calculations!
+- Works with all Zendure SolarFlow devices: HUB1200 (tested), HUB2000 and AIO (both untested)!
 
 ## Notes
 
-1. Currently only working with SolarFlow devices (tested only with HUB1200). AIO is not supported (as I don't have such a device..)
+1. Please deactivate/uncheck all modes in the Zendure App, otherwise it is not possible to set the output limit!
 
-2. It is possible to control the Output limit and other settings with the states created in the productId/deviceKey/control subfolder. Please deactivate/uncheck all modes in the Zendure App, otherwise it is not possible to set the output limit!
+   ![Solarflow Settings Window](https://raw.github.com/nograx/ioBroker.zendure-solarflow/master/Screenshots/ZendureSolarflowSettings.png)
 
-   ![Solarflow Setings Window](https://raw.github.com/nograx/ioBroker.zendure-solarflow/master/Screenshots/ZendureSolarflowSettings.png)
-
-3. You will be logged out of the official iOS or Android App after logging in with the ioBroker adapter. This is a normal behavior. As a workaround you can create an second Zendure account with another e-mail and grant access to your Solarflow HUB to this account. Then use the second account for ioBroker / the Zendure Solarflow adapter.
+2. You will be logged out of the official iOS or Android App after logging in with the ioBroker adapter. This is a normal behavior. As a workaround you can create an second Zendure account with another e-mail and grant access to your Solarflow HUB to this account. Then use the second account for ioBroker / the Zendure Solarflow adapter.
 
 ## Credits
 
@@ -46,13 +45,16 @@ If you find the adapter useful for you and want to support my work, feel free to
 
 [![Donate](https://img.shields.io/badge/PayPal-00457C?style=for-the-badge&logo=paypal&logoColor=white)](https://www.paypal.com/paypalme/PeterFrommert)
 
-## Changelog
-### 1.3.1-alpha.6 (2024-04-02)
+## Changelog
+
+### **WORK IN PROGRESS**
+
+- Add calculation states for solar input 1 & 2
+- Add states for wifiState, hubState, pvBrand and inverseMaxPower
+- Rename missleading title for input field 'Username' in settings to 'E-Mail'
+- Fix energyWh, energyWhMax and SOC in calculations if "Low Voltage Check" is not used, it will set the calculation soc to 0 if minSoc (discharge limit) is reached
+- Fix password input in settings
 
-- Fix energyWh, energyWhMax and SOC in calculations if "Low Voltage Check" is not used, it will set the calculation soc to 0 if minSoc (discharge limit) is reached.
-- Fix missleading title in settings 'Username' to 'E-Mail'
-- Add calculation states for solar input 1 & 2
-
 ### 1.3.0 (2024-03-26)
 
 - Fix calculation for outputPackEnergy and packInputEnergy
@@ -61,149 +63,149 @@ If you find the adapter useful for you and want to support my work, feel free to
 - Add state and control for bypass mode and automatic reset of bypass mode next day
 - Add states for pass (Bypass on/off), autoRecover (auto-mode for Bypass next day) and passMode (current bypass mode)
 - Add efficiency factor for calculations (96% charging, 92%-98%\* for discharging - based on measuring from VoltAmpereLux Youtube channel - THANKS!)
-- Changed calculations timeframe from 10secs to 30secs (performance related)
-
+- Changed calculations timeframe from 10secs to 30secs (performance related)
+
 ### 1.2.5 (2024-03-19)
 
-- Fix error "Read-only" state written without ack-flag
-
+- Fix error "Read-only" state written without ack-flag
+
 ### 1.2.4 (2024-03-18)
 
-- Use setInterval instead of cronjob for refreshing access token
-
+- Use setInterval instead of cronjob for refreshing access token
+
 ### 1.2.3 (2024-03-15)
 
 - Fix ACK on onStateChange
-- Update Readme
-
+- Update Readme
+
 ### 1.2.2 (2024-03-14)
 
 - Fix issue that renamed devices could not be found.
 - Add states for name, product name, serial ID and configured server.
 - Make "energyWhMax" State writable, so you can adjust the max Value.
-- Sent a warning if a device is configured for a server not in use.
-
+- Sent a warning if a device is configured for a server not in use.
+
 ### 1.2.1 (2024-03-13)
 
 - Fix calculation of soc: Set energyMaxWh to current energyWh if Zendures SOC is 100%
-- Round SOC to max 1 digit after comma.
-
+- Round SOC to max 1 digit after comma.
+
 ### 1.2.0 (2024-03-13)
 
 - EU server is working now.
 - Fix calculation errors in log when calculation is not used
 - More Debug Output
 - Filter SolarFlow devices, so no other devices (e.g. SmartPlugs) will be added.
-- Clear password when settings loaded, as encrypted password is loaded into input and leads to a wrong password.
-
+- Clear password when settings loaded, as encrypted password is loaded into input and leads to a wrong password.
+
 ### 1.1.23 (2024-03-11)
 
 - Fix calculation of "energy in batteries"
-- Try to implement EU server - untested -
-
+- Try to implement EU server - untested -
+
 ### 1.1.22 (2024-03-09)
 
-- Try to fix reset values at midnight
-
+- Try to fix reset values at midnight
+
 ### 1.1.21 (2024-03-08)
 
-- Fix calculation timeframe
-
+- Fix calculation timeframe
+
 ### 1.1.17 (2024-03-08)
 
 - Improve calculations
-- No autocomplete on settings
-
+- No autocomplete on settings
+
 ### 1.1.15 (2024-03-06)
 
 - Calculations improved
-- Stop energy input on low voltage is now an option in settings
-
+- Stop energy input on low voltage is now an option in settings
+
 ### 1.1.14 (2024-03-04)
 
 - Reorganize Code
 - Calculations are now optional and have to be enabled in settings
 - Calculation of SOC from voltage and energy go in and out of batteries
-- Stop energy feed if voltage drops under limit
-
+- Stop energy feed if voltage drops under limit
+
 ### 1.1.11 (2024-03-01)
 
 - Fix Solar Input 1 and 2 from the new Zendure firmware
 - Fix remaining charging time
-- Fix calculations overwritten when data with 0 value comes in.
-
+- Fix calculations overwritten when data with 0 value comes in.
+
 ### 1.1.8 (2024-02-29)
 
-- Fix calculation error
-
+- Fix calculation error
+
 ### 1.1.7 (2024-02-29)
 
 - Add energy calculations for 'today'
-- Fix minutes display bug for remaining charge and discharge time
-
+- Fix minutes display bug for remaining charge and discharge time
+
 ### 1.1.4 (2024-02-28)
 
-- Fix timeout issues
-
+- Fix timeout issues
+
 ### 1.1.0 (2024-02-27)
 
 - Switched solar input 1 und 2 to adjust the behavior like the offical app
 - Added Calculations folder, remaining charge and discharge time is now available as formatted time
-- Added a note in the settings that this adapter only works with the global server
-
+- Added a note in the settings that this adapter only works with the global server
+
 ### 1.0.7 (2024-01-16)
 
 - Add control for charge and discharge limit
-- Update Readme Screenshot
-
+- Update Readme Screenshot
+
 ### 1.0.6 (2024-01-16)
 
-- Update Readme
-
+- Update Readme
+
 ### 1.0.5 (2024-01-15)
 
-- Added state for both Solarflow PV inputs
-
+- Added state for both Solarflow PV inputs
+
 ### 1.0.4 (2023-12-16)
 
-- Added Timeout for axios
-
+- Added Timeout for axios
+
 ### 1.0.3 (2023-12-12)
 
-- Password is now encrypted. NOTE: You have to re-enter the password after adapter update!
-
+- Password is now encrypted. NOTE: You have to re-enter the password after adapter update!
+
 ### 1.0.2 (2023-12-12)
 
 - Adapter improvements suggested by iobroker team
-- Fixed battery pack temperature (data is in kelvin, so now converting to celcius)
-
+- Fixed battery pack temperature (data is in kelvin, so now converting to celcius)
+
 ### 1.0.1 (2023-11-03)
 
 - Fix translationscd so
 - Use 'extendObjectAsync' instead of 'setObjectNotExistsAsync'
-- First official release version
-
+- First official release version
+
 ### 0.1.0-alpha.2 (2023-10-27)
 
-- Don't stop the adapter when no login information is provided!
-
+- Don't stop the adapter when no login information is provided!
+
 ### 0.1.0-alpha.1 (2023-10-27)
 
-- Fix Typescript typos
-
+- Fix Typescript typos
+
 ### 0.1.0-alpha.0 (2023-10-26)
 
 - Get battery information
-- Reset states if no new data comes in (e.g. when Hub goes offline). Currently the last value still persist when Hub goes offline, so you may have 'pseudo' data in your states.
-
+- Reset states if no new data comes in (e.g. when Hub goes offline). Currently the last value still persist when Hub goes offline, so you may have 'pseudo' data in your states.
+
 ### 0.0.2 (2023-10-25)
 
-- Initital Release, retrieving Hub data, telemetry and setting the output limit works!
-
+- Initital Release, retrieving Hub data, telemetry and setting the output limit works!
+
 ### 0.0.1 (2023-10-24)
 
-- First test
-
+- First test
+
 ## License
 
 MIT License
@@ -226,4 +228,4 @@ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+SOFTWARE.

admin/src/app.tsx

@@ -57,6 +57,7 @@ class App extends GenericApp {
     return (
       <div className="App">
         <Settings
+          app={this}
           native={this.state.native}
           onChange={(attr, value) => this.updateNativeValue(attr, value)}
         />