Skip to content

Guidence about how to run Aloam alogrithm in Ubuntu20.04 and use evo tool to evaluate the lidar odom result

Notifications You must be signed in to change notification settings

nuslde/aloam_lidar_odom_result_generate

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

aloam_lidar_odom_result_generate

Ubuntu 20.04 ROS Noetic C++

evo_result

1.Dependencies

  • System Requirements:
    • Ubuntu 20.04
    • ROS Noetic
    • C++14
    • CMake: 3.0.2 and above
  • Libraries:
    • Eigen3
    • PCL1.10
    • Ceres
    • evo

2.Installation

Note: First of all, make sure you have installed ros

Install required dependencies:

sudo apt-get update
sudo apt-get install git gcc g++ vim make cmake

2.1 Install Eigen3

Download eigen-3.3.9, and extract it in /Home/user_name (for example /home/nuslde). Then, compile the source code and install it:

cd eigen-3.3.9
mkdir build && cd build
cmake ..
make
sudo make install

After installation, the head files are in:

/usr/local/include/eigen3/

Copy the head files to /usr/local/include:

sudo cp -r /usr/local/include/eigen3/Eigen /usr/local/include

2.2 Install PCL

The installation of PCL only need one command after ubuntu18.04:

cd 
sudo apt-get install libpcl-dev pcl-tools

Using pcl_viewer open '.pcd' formed point cload file to check whether the installation of PCL is sucessfully

#xxx.pcd is the testing .pcd file's name
pcl_viewer xxx.pcd

2.3 Installation of Ceres

Install dependencies

sudo apt-get install cmake
sudo apt-get install libgoogle-glog-dev libgflags-dev
sudo apt-get install libatlas-base-dev
sudo apt-get install libeigen3-dev

Download ceres-solver-2.1.0, and extract it in /Home/user_name (for example /home/nuslde). Then, compile the source code and install it:

mkdir ceres-bin
cd ceres-bin
cmake ../ceres-solver-2.1.0
make -j4
make test
sudo make install

Test whether the installation of Ceres is sucessful:

#run the following command under the ceres-bin
bin/simple_bundle_adjuster ../ceres-solver-2.1.0/data/problem-16-22106-pre.txt

The result is show below: Ceres_teset_result

2.4 Installation of EVO

Installation the Evo tool following the Installation/Upgrade in evo

Note: If the evo command like evo_ape can not be used after installation, restarting your computer may deal with the problem.

2.5 Installation of Aloam

First, download Aloam to your computer:

cd 
mkdir catkin_ws
cd catkin_ws
mkdir src
cd src
git clone https://github.com/HKUST-Aerial-Robotics/A-LOAM.git

Then, the CMakeLists.txt should be modified:

#change "set(CMAKE_CXX_FLAGS "-std=c++11")" to the following line:
set(CMAKE_CXX_FLAGS "-std=c++14")

Modifying the four '.cpp' files in the src file

  • Modify /camera_init in the four .cpp files to camera_init

  • Modify #include <opencv/cv.h> in scanRegistration.cpp to #include <opencv2/imgproc.hpp>

  • Modify CV_LOAD_IMAGE_GRAYSCALE in kittiHelper.cpp to cv::IMREAD_GRAYSCALE

  • Add the following code in laserMapping.cpp

    #after nearly line 86
    int laserCloudValidInd[125];
    int laserCloudSurroundInd[125];
    
    //--------------------------
    //added code
    
    int init_flag=true;
    
    Eigen::Matrix4f H;
    Eigen::Matrix4f H_init;
    Eigen::Matrix4f H_rot;
    #after nearly line234
        odomAftMapped.pose.pose.orientation.x = q_w_curr.x();
        odomAftMapped.pose.pose.orientation.y = q_w_curr.y();
        odomAftMapped.pose.pose.orientation.z = q_w_curr.z();
        odomAftMapped.pose.pose.orientation.w = q_w_curr.w();
        odomAftMapped.pose.pose.position.x = t_w_curr.x();
        odomAftMapped.pose.pose.position.y = t_w_curr.y();
        odomAftMapped.pose.pose.position.z = t_w_curr.z();
        pubOdomAftMappedHighFrec.publish(odomAftMapped);
    
    
    //-----------------------------------------------------------------
    //added code
    //generate the KITTI format trajectory result
    
        // std::ofstream pose1("/home/xxx/txt/aloam.txt", std::ios::app); // "/home/xxx/txt/aloam.txt" is the path where the result generate
        // pose1.setf(std::ios::scientific, std::ios::floatfield);
        // pose1.precision(15);
        
        // Eigen::Matrix3d rotation_matrix;
        // rotation_matrix = q_w_curr.toRotationMatrix();
        // Eigen::Matrix<double, 4, 4> myaloam_pose;
        // myaloam_pose.topLeftCorner(3,3) = rotation_matrix;
        
        // myaloam_pose(0,3) = t_w_curr.x();
        // myaloam_pose(1,3) = t_w_curr.y();
        // myaloam_pose(2,3) = t_w_curr.z();
        
        // Eigen::Matrix3d temp;
        // temp = myaloam_pose.topLeftCorner(3,3);
        // Eigen::Quaterniond quaternion(temp);
        
        // pose1 << odomAftMapped.header.stamp << " "
        // 	<< myaloam_pose(0,3) << " "
        // 	<< myaloam_pose(1,3) << " "
        // 	<< myaloam_pose(2,3) << " "
        // 	<< quaternion.x() << " "
        // 	<< quaternion.y() << " "
        // 	<< quaternion.z() << " "
        // 	<< quaternion.w() << std::endl;
        
        // pose1.close();
    
    //-----------------------------------------------------------------
    //generate the KITTI format trajectroy result
    
    
    
        Eigen::Matrix3d R = q_w_curr.toRotationMatrix();
    
        if (init_flag==true)
        {
    
        H_init<< R.row(0)[0],R.row(0)[1],R.row(0)[2],t_w_curr.x(),
                    R.row(1)[0],R.row(1)[1],R.row(1)[2],t_w_curr.y(),
                    R.row(2)[0],R.row(2)[1],R.row(2)[2],t_w_curr.z(),
                    0,0,0,1;
    
        init_flag=false;
    
        //std::cout<<"surf_th : "<<surfThreshold<<endl;
    
        }
    
        H_rot<<	0,-1,0,0,
                    0,0,-1,0,
                    1,0,0,0,
                    0,0,0,1;
    
        H<<  R.row(0)[0],R.row(0)[1],R.row(0)[2],t_w_curr.x(),
                R.row(1)[0],R.row(1)[1],R.row(1)[2],t_w_curr.y(),
                R.row(2)[0],R.row(2)[1],R.row(2)[2],t_w_curr.z(),
                0,0,0,1;
    
    
    
        H = H_rot*H_init.inverse()*H; //to get H12 = H10*H02 , 180 rot according to z axis
    
        std::ofstream foutC("/home/xxx/txt/aloam.txt", std::ios::app); // "/home/xxx/txt/aloam.txt" is the path where the result generate
    
        foutC.setf(std::ios::scientific, std::ios::floatfield);
        foutC.precision(6);
    
        //foutC << R[0] << " "<<transformMapped[3]<<" "<< R.row(1) <<" "<<transformMapped[4] <<" "<<  R.row(2) <<" "<< transformMapped[5] << endl;
            for (int i = 0; i < 3; ++i)
        {
                for (int j = 0; j < 4; ++j)
                {
                        if(i==2 && j==3)
                        {
                                foutC <<H.row(i)[j]<< std::endl ;
                        }
                        else
                        {
                                foutC <<H.row(i)[j]<< " " ;
                        }
    
                }
        }
    
        foutC.close();
    }
    
    //------------------------------------------------------------------
    
    void process()
    {
        while(1)
        {
            while (!cornerLastBuf.empty() && !surfLastBuf.empty() &&
                !fullResBuf.empty() && !odometryBuf.empty())
            {
                mBuf.lock();
                while (!odometryBuf.empty() && odometryBuf.front()->header.stamp.toSec() < cornerLastBuf.front()->header.stamp.toSec())
                    odometryBuf.pop();
                if (odometryBuf.empty())
                {
                    mBuf.unlock();
                    break;

3.Usage

3.1 Compiling Aloam

Modify the "xxx" of "/home/xxx/txt/aloam.txt" in laserMapping.cpp to your own user name

Compiling Aloam

cd catkin_ws
catkin_make

3.2 Perpare to do evo

Create a new files named "txt", and generate aloam.txt:

cd
mkdir txt
touch aloam.txt

Then, copy the groundtruth files in the same file

3.3 Run Aloam

There are three launch files in the package related to run Aloam directly, they are:

  • aloam_velodyne_VLP_16.launch
  • aloam_velodyne_HDL_32.launch
  • aloam_velodyne_HDL_64.launch

Which launch file will be used is depend on the number of the mechanical LIDAR's line. For example, if the mechanical LIDAR recorded in the rosbag is 64 lines. The following command should be run for using Aloam

cd catkin_ws
source devel/setup.bash
roslaunch aloam_velodyne aloam_velodyne_HDL_64.launch

The aloam.txt in the txt file will store the aloam lidar odometry reuslt after finishing the Aloam alogrithm

Evaluate the performance of the alogrithm by following command:

cd 
cd txt
evo_ape kitti 05.txt aloam.txt -r full -va --plot --plot_mode xz

Note: Sometime, there will be an error such as the following:

evo_error

The error is caused by the different poses number of the two .txt files, and the error can not be dealed with by using "evo_ape kitti 05.txt aloam.txt -r full -va --plot --plot_mode xz --correct_scale --align" commend (reason is provide by the evo tool's developer - Michael Grupp)

reason

The method I deal with the problem by add or decrease the poses in the groundtruth file

About

Guidence about how to run Aloam alogrithm in Ubuntu20.04 and use evo tool to evaluate the lidar odom result

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published