Skip to content

litte code for ESP8266 Board with 0.96 Inch OLED Display

Notifications You must be signed in to change notification settings

peff74/esp8266_OLED_HW-364A

Repository files navigation

HW-364A (USB-C) / HW-364B (Micro USB)

AHT20_BMP280 logo AHT20_BMP280 logo

  • The HW-364A / HW-364B is a very practical and cheap ESP8266 with 0.96 Inch OLED Display.
  • It is sold on all known platforms.
  • Some dealers provide incorrect technical data, which sometimes makes it difficult to get it up and running...
  • be aware that SDA and SCL may be swapped!!!

Technical specs

  • SDA is D6 / GPIO14
  • SCL is D5 / GPIO12
  • Address is 0x3C

Code using Adafruit_SSD1306

#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

#define OLED_RESET     -1   // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C // If not work please scan the bus
#define OLED_SDA 14         // D6
#define OLED_SCL 12         // D5

Adafruit_SSD1306 *display;

int c = 0; 


void handle_oled(int c) {
  display->clearDisplay();
  display->setTextSize(1);
  display->setTextColor(SSD1306_WHITE);
  display->setCursor(0, 0);
  display->println("Display is working!");
  display->println("");
  display->println("");
  display->println("Have fun with it");
  display->println("");
  display->println("");
  display->print("Uptime: ");
  display->print(c);
  display->println("s");
  display->display();
}


void setup() {
  display = new Adafruit_SSD1306(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
  Wire.begin(OLED_SDA, OLED_SCL);
  display->begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);
}

void loop() {
  handle_oled(c);
  c++;
  delay(1000);
}

AHT20_BMP280 logo

Code using U8g2

#include <U8g2lib.h>
#define OLED_RESET     U8X8_PIN_NONE // Reset pin
#define OLED_SDA 14                  // D6
#define OLED_SCL 12                  // D5

U8G2_SSD1306_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, OLED_RESET, OLED_SCL, OLED_SDA);

int c = 0;

void handle_oled(int c) {
  u8g2.clearBuffer();
  u8g2.setFont(u8g2_font_ncenB08_tr);
  u8g2.drawStr(0, 10, "Display is working!");
  u8g2.drawStr(0, 30, "Have fun with it");
  char buffer[20];
  snprintf(buffer, sizeof(buffer), "Uptime: %ds", c);
  u8g2.drawStr(0, 50, buffer);
  u8g2.sendBuffer();
}

void setup() {
  u8g2.begin();
}

void loop() {
  handle_oled(c);
  c++;
  delay(1000);
}

AHT20_BMP280 logo

Hits

About

litte code for ESP8266 Board with 0.96 Inch OLED Display

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages