forked from pulp-platform/FlooNoC
-
Notifications
You must be signed in to change notification settings - Fork 0
/
floo_cdc.sv
62 lines (56 loc) · 2.01 KB
/
floo_cdc.sv
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
// Copyright 2023 ETH Zurich and University of Bologna.
// Solderpad Hardware License, Version 0.51, see LICENSE for details.
// SPDX-License-Identifier: SHL-0.51
//
// Author: Tim Fischer <[email protected]>
`include "common_cells/assertions.svh"
/// A Clock-Domain-Crossing (CDC) module implemented with a gray-counter based FIFO.
module floo_cdc #(
/// Number of virtual channels
/// Currently only supports 1 virtual channel
parameter int unsigned NumVirtChannels = 32'd1,
/// Number of physical channels
/// Currently only supports 1 physical channel
parameter int unsigned NumPhysChannels = 32'd1,
/// Fifo log depth of the gray-counter based FIFO
/// default is 3 (8 entries) which are needed to
/// guarantee full throughput of the FIFO with 2 sync stages
/// TODO: Check if this is true
parameter int unsigned FifoLogDepth = 32'd3,
/// Number of sync stages of read and write pointer
/// in the gray-counter based FIFO
parameter int unsigned SyncStages = 32'd2,
/// Flit type of the FIFO
parameter type flit_t = logic
) (
input logic src_clk_i,
input logic src_rst_ni,
input logic src_valid_i,
output logic src_ready_o,
input flit_t src_data_i,
input logic dst_clk_i,
input logic dst_rst_ni,
output logic dst_valid_o,
input logic dst_ready_i,
output flit_t dst_data_o
);
cdc_fifo_gray #(
.LOG_DEPTH ( FifoLogDepth ),
.SYNC_STAGES ( SyncStages ),
.T ( flit_t )
) i_cdc_fifo_gray (
.src_rst_ni ( src_rst_ni ),
.src_clk_i ( src_clk_i ),
.src_data_i ( src_data_i ),
.src_valid_i ( src_valid_i ),
.src_ready_o ( src_ready_o ),
.dst_rst_ni ( dst_rst_ni ),
.dst_clk_i ( dst_clk_i ),
.dst_data_o ( dst_data_o ),
.dst_valid_o ( dst_valid_o ),
.dst_ready_i ( dst_ready_i )
);
// Currently only supports 1 virtual/physical channel
`ASSERT_INIT(MultVirtChannels, NumVirtChannels == 1)
`ASSERT_INIT(MultPhysChannels, NumPhysChannels == 1)
endmodule