APRS TX

APRS TX

Automatic Packet Reporting System TX App sends messages on selected Frequency. The App allows the configuration of the APRS Stream. The App is marked as Beta but it appears that it does send messages in AFSK.

The App has settings for:

• "Source SSID"
• "Desitination ID" it has no location for the adding of the Call Sign That is used with the SSID.
• The message content can be added in the "Info Field" by selecting the "Set" Button a maximum of 30 characters can be added not the typical maximum of 67 or 256.
• Frequency for TX from the on screen keypad
• Deviation
• Gain settings of IF (0-47) and RF AMP "0dB" or 14dB

The transmission is trigered by the "Start" Button and stops after the end of the message sequence.