Shutter card

Note : Be careful, since version 2021.11.0 of Home Assistant, there is a breaking change in the icon buttons. So install v1.3.0 of this card only if you have at least the version 2021.11.0 of Home Assistant

This card allows to open, close or set a shutter to the opening rate you want.

Configuration

General

Name	Type	Required	Default	Description
type	string	True	-	Must be "custom:shutter-card"
title	string	False	-	Title of the card

Entities

Name	Type	Required	Default	Description
entity	string	True	-	The shutter entity ID
name	string	False	Friendly name of the entity	Name to display for the shutter
buttons_position	string	False	left	Set buttons on left, right, top or bottom of the shutter
title_position	string	False	top	Set title on top or on bottom of the shutter
invert_percentage	boolean	False	false	Set it to true if your shutter is 100% when it is closed, and 0% when it is opened
tilt	boolean	False	false	Set it to true if your shutters support tilting.
partial_close_percentage	int	False	0	Set it to a percentage (0-100) if you want to be able to quickly go to this "partially closed" state using a button.
offset_closed_percentage	int	False	0	Set it to a percentage (0-100) of travel that will still be considered a "closed" state in the visualization.
always_percentage	boolean	False	false	If set to true, the end states (opened/closed) will be also as numbers (0 / 100 % ) instead of a text
shutter_width_px	int	False	153	Set shutter visualization width in px. You can make it thicker or narrower to fit your layout.
disable_end_buttons	boolean	False	false	If set to true, the end states (opened/closed) will also deactivate the buttons for that direction (i.e. the "up" button will be disabled when the shutters are fully open)

Remark : you can also just give the entity ID (without to specify entity:) if you don't need to specify the other configurations.

Sample

type: 'custom:shutter-card'
title: My shutters
entities:
  - entity: cover.left_living_shutter
    name: Left shutter
    buttons_position: left
    title_position: bottom
  - cover.bedroom_shutter

Install

If you use HACS, the resources will automatically be configured with the needed file.

If you don't use HACS, you can download js file from latest releases. Drop it then in www folder in your config directory. Next add the following entry in lovelace configuration:

resources:
  - url: /local/hass-shutter-card.js
    type: module