This repo provides interim ZMK firmware access while the Hillside keyboard is integrated into ZMK. Hillside 48 is a split ergonomic keyboard with 3x6+4+2 choc-spaced keys.
To build the firmware from this repo:
- Fork this repo on GitHub
- Clone your fork locally
- Make some change to this README to trigger a build.
- Push that change to your fork on GitHub
- That change will trigger a build action
- Look in the actions tab for the build triggered by that change
- Wait for the build to finish
- Click on the build link
- Download the artifact file with the firmware
- See Installing The Firmware for more details from there.
Once your board works with the default firmware, you can modify the keymap. Your copy of the default Hillside 48 keymap is in ./config/hillside48.keymap. Modify that as needed. If you want to enable features, modify ./config/hillside48.conf. The Hillside 48 shield definition should not need to be modified and is in ./config/boards/shields/hillside48. The readme there has more information.
Once Hillside is integrated into ZMK, it is best to create a zmk-config repo based off of the ZMK install instructions instead of using a clone of this repo, as it may change or be removed.
check check