Using the software

Sample Usage

This page gives examples of how to use Net-UDAP.

Generally, you should be able to take one of these commands, change some values to match your own environment (SqueezeCenter address, wireless network details, etc.) and use them to configure your SqueezeBox.

The examples make the following assumptions:

• your SqueezeBox has been factory reset before beginning
• you have only one SBR to configure, ie. you will use conf 1 to select it.
• my SqueezeCenter instance is on 192.168.1.150
• I am in the UK, so I use wireless region id 14
• my wireless network name (SSID) is mySSID

Configuration Fragments

Connect to SqueezeNetwork

set server_address=0.0.0.1

Wired Network

set interface=1

Wireless Network

set interface=0

Static IP

set lan_ip_mode=0

DHCP

set lan_ip_mode=1

WEP 64-bit

set wireless_SSID=MySSID wireless_mode=0 wireless_region_id=14 wireless_wep_on=1 wireless_keylen=0 wireless_wep_key_0=1a2b3c4d5e

WEP 128-bit

set wireless_SSID=MySSID wireless_mode=0 wireless_region_id=14 wireless_wep_on=1 wireless_keylen=1 wireless_wep_key_0=112233445566778899aabbccdd

WPA 1

set wireless_SSID=MySSID wireless_mode=0 wireless_region_id=14 wireless_wpa_on=1 wireless_wpa_mode=1 wireless_wpa_psk="Top Secret!"

WPA 2, TKIP+AES

set wireless_SSID=MySSID wireless_mode=0 wireless_region_id=14 wireless_wpa_on=1 wireless_wpa_mode=2 wireless_wpa_cipher=3 wireless_wpa_psk="Top Secret!"

Complete Examples

Wired, DHCP

discover
conf 1
set interface=1 lan_ip_mode=1 squeezecenter_address=192.168.1.150
save_data
reset

Wired, static IP

discover
conf 1
set interface=1 lan_ip_mode=0 lan_gateway=192.168.3.1 lan_network_address=192.168.3.10 lan_subnet_mask=255.255.255.0 primary_dns=192.168.3.1 squeezecenter_address=192.168.1.150
save_data
reset

Wireless, 64-bit WEP, DHCP

discover
conf 1
set interface=0 wireless_mode=0 wireless_region_id=14 wireless_SSID=MySSID wireless_wep_on=1 wireless_keylen=0 wireless_wep_key_0=1a2b3c4d5e lan_ip_mode=1 squeezecenter_address=192.168.1.150
save_data
reset

Wireless, 64-bit WEP, static IP

discover
conf 1
set interface=0 wireless_mode=0 wireless_region_id=14 wireless_SSID=MySSID wireless_wep_on=1 wireless_keylen=0 wireless_wep_key_0=1a2b3c4d5e lan_ip_mode=0 lan_gateway=192.168.3.1 lan_network_address=192.168.3.10 lan_subnet_mask=255.255.255.0 primary_dns=192.168.3.1 squeezecenter_address=192.168.1.150
save_data
reset

Wireless, 128-bit WEP, DHCP

discover
conf 1
set interface=0 set wireless_mode=0 wireless_region_id=14 wireless_SSID=MySSID wireless_wep_on=1 wireless_keylen=1 wireless_wep_key_0=112233445566778899aabbccdd
 lan_ip_mode=1 squeezecenter_address=192.168.1.150
save_data
reset

Wireless, WPA1, DHCP

discover
conf 1
set interface=0 wireless_mode=0 wireless_region_id=14 wireless_SSID=MySSID wireless_wpa_on=1 wireless_keylen=1 wireless_wpa_psk="Top Secret!" lan_ip_mode=1 squeezecenter_address=192.168.1.150
save_data
reset

Wireless, WPA2, TKIP+AES, DHCP

discover
conf 1
set interface=0 wireless_mode=0 wireless_region_id=14 wireless_SSID=MySSID wireless_wpa_on=1 wireless_wpa_mode=2 wireless_wpa_cipher=3 wireless_wpa_psk="Top Secret!" lan_ip_mode=1 squeezecenter_address=192.168.1.150
save_data
reset

Bridged, WPA 1, TKIP+AES

Setup:

• Server (with Squeezecenter) <-wire-> Receiver <-wireless-> Wifi network (with router, and other computers)

Additional setup parameters:

• lan-address of receiver: 192.168.1.136 (static)
• gateway (adsl router for instance): 192.168.1.1
• Primary DNS (same as on adsl router): 23.23.23.1
• Secondary DNS (same as on adsl router): 23.23.23.2

discover
conf 1
set lan_ip_mode=0 lan_network_address=192.168.1.136 primary_dns=23.23.23.1 secondary_dns=23.23.23.2 server_address=192.168.1.150 squeezecenter_address=192.168.1.150 lan_gateway=192.168.1.1 wireless_SSID=mySSID wireless_mode=0 wireless_region_id=14 wireless_wpa_cipher=3 wireless_wpa_on=1 wireless_wpa_mode=1 wireless_wpa_psk="Top Secret!" wireless_channel=6 interface=0 bridging=1
save_data
reset