-
Notifications
You must be signed in to change notification settings - Fork 68
efika_mx
http://wiki.debian.org/EfikaMX/#Default_U-Boot_Environment
http://crux-arm.nu/gitweb?p=uboot.git;a=summary
http://crux-arm.nu/SupportedDevices/EfikaMX-SmartTop
http://crux-arm.nu/files/devices/efikamx/
http://crux-arm.nu/releases/2.7.1/
rc.modules: http://dpaste.com/767857/ (link is dead, use the default kernel config from efika kernel repo, then go s/=m$/=y/ on the whole file to buid all modules statically into the kernel, so you dont have to mess with kernel modules loading!)
create 2 primary partitions on your sd card
msdos partition table is fine, first (/boot) partition should be at least 16MB, better 32
run mkfs on them (ext2 for boot, ext4 for root)
BOOT=/mnt/sdcard_part1_ext2
ROOT=/mnt/sdcard_part2_ext4
git clone git://crux-arm.nu/crux-arm/uboot.git
cd uboot
make mkimage
cd devices/efikamx/
nano boot-mmc.script
#(change the tty there to tty1 and remove baudrate)
make bootscr
cp work/boot-mmc.scr $BOOT/boot.scr
rootfs ( available here http://ftp.barfooze.de/pub/sabotage/ )
cd $ROOT
tar xf ~/Downloads/arm-bin/sabotage-rootfs.tar
kernel: compile with crosscompiler (this one should work https://bitbucket.org/GregorR/musl-cross/downloads/crossx86-arm-linux-musleabi-0.9.2.tar.xz )
git clone git://github.com/genesi/linux-legacy.git
cd linux-legacy/
make ARCH=arm CROSS_COMPILE=arm-linux-musleabi- -j7 mx51_efikamx_defconfig
# will create .config
make ARCH=arm CROSS_COMPILE=arm-linux-musleabi- menuconfig
# set ext4 and ext2 to built-in
export PATH=$PATH:/home/rofl/apps/arm-linux-musleabi-gcc471/bin/
make ARCH=arm CROSS_COMPILE=arm-linux-musleabi- -j7
#this'll create vmlinux and a ton of kernel modules
export PATH=$PATH:/media/3T/git-mirror/uboot/work/u-boot-2011.12/tools/
make ARCH=arm CROSS_COMPILE=arm-linux-musleabi- uImage
#this'll create uImage
cp arch/arm/boot/uImage $BOOT/
mkdir -p dist/lib/firmware #otherwise below command will fail with an invalid make target
make ARCH=arm CROSS_COMPILE=arm-linux-musleabi- INSTALL_MOD_PATH=/media/3T/git-mirror/linux-legacy/dist/ modules_install
cp -r dist/* $ROOT/