Merge pull request #27 from sched-ext/v6.9.3-scx1

v6.9.3-scx1

Documentation/ABI/stable/sysfs-block

@@ -101,6 +101,16 @@ Description:
 		devices that support receiving integrity metadata.
 
 
+What:		/sys/block/<disk>/partscan
+Date:		May 2024
+Contact:	Christoph Hellwig <[email protected]>
+Description:
+		The /sys/block/<disk>/partscan files reports if partition
+		scanning is enabled for the disk.  It returns "1" if partition
+		scanning is enabled, or "0" if not.  The value type is a 32-bit
+		unsigned integer, but only "0" and "1" are valid values.
+
+
 What:		/sys/block/<disk>/<partition>/alignment_offset
 Date:		April 2009
 Contact:	Martin K. Petersen <[email protected]>

Documentation/admin-guide/hw-vuln/core-scheduling.rst

@@ -67,8 +67,8 @@ arg4:
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
-    userspace pointer to an unsigned long for storing the cookie returned by
-    ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
+    userspace pointer to an unsigned long long for storing the cookie returned
+    by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
 
 In order for a process to push a cookie to, or pull a cookie from a process, it
 is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the

Documentation/admin-guide/mm/damon/usage.rst

@@ -153,7 +153,7 @@ Users can write below commands for the kdamond to the ``state`` file.
 - ``clear_schemes_tried_regions``: Clear the DAMON-based operating scheme
   action tried regions directory for each DAMON-based operation scheme of the
   kdamond.
-- ``update_schemes_effective_bytes``: Update the contents of
+- ``update_schemes_effective_quotas``: Update the contents of
   ``effective_bytes`` files for each DAMON-based operation scheme of the
   kdamond.  For more details, refer to :ref:`quotas directory <sysfs_quotas>`.
 
@@ -342,7 +342,7 @@ Based on the user-specified :ref:`goal <sysfs_schemes_quota_goals>`, the
 effective size quota is further adjusted.  Reading ``effective_bytes`` returns
 the current effective size quota.  The file is not updated in real time, so
 users should ask DAMON sysfs interface to update the content of the file for
-the stats by writing a special keyword, ``update_schemes_effective_bytes`` to
+the stats by writing a special keyword, ``update_schemes_effective_quotas`` to
 the relevant ``kdamonds/<N>/state`` file.
 
 Under ``weights`` directory, three files (``sz_permil``,
@@ -434,7 +434,7 @@ pages of all memory cgroups except ``/having_care_already``.::
     # # further filter out all cgroups except one at '/having_care_already'
     echo memcg > 1/type
     echo /having_care_already > 1/memcg_path
-    echo N > 1/matching
+    echo Y > 1/matching
 
 Note that ``anon`` and ``memcg`` filters are currently supported only when
 ``paddr`` :ref:`implementation <sysfs_context>` is being used.

Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml

@@ -28,6 +28,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -48,6 +51,7 @@ required:
   - compatible
   - dmas
   - reg
+  - clocks
 
 additionalProperties: false
 
@@ -58,6 +62,7 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
+        clocks = <&axi_clk>;
         #io-backend-cells = <0>;
     };
 ...

Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml

@@ -37,15 +37,15 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
@@ -59,9 +59,9 @@ required:
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,9 +82,9 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {

Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml

@@ -18,13 +18,15 @@ properties:
     oneOf:
       - enum:
           - loongson,ls2k1000-thermal
+          - loongson,ls2k2000-thermal
       - items:
           - enum:
-              - loongson,ls2k2000-thermal
+              - loongson,ls2k0500-thermal
           - const: loongson,ls2k1000-thermal
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
@@ -38,6 +40,24 @@ required:
   - interrupts
   - '#thermal-sensor-cells'
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - loongson,ls2k2000-thermal
+
+then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 2
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
 unevaluatedProperties: false
 
 examples:

Documentation/sphinx/kernel_include.py

@@ -97,7 +97,6 @@ def _run(self):
         # HINT: this is the only line I had to change / commented out:
         #path = utils.relative_path(None, path)
 
-        path = nodes.reprunicode(path)
         encoding = self.options.get(
             'encoding', self.state.document.settings.input_encoding)
         e_handler=self.state.document.settings.input_encoding_error_handler

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 9
-SUBLEVEL = 1
+SUBLEVEL = 3
 EXTRAVERSION = -scx1
 NAME = Hurr durr I'ma ninja sloth
 

arch/arm/configs/sunxi_defconfig

@@ -110,6 +110,7 @@ CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
+CONFIG_DRM_DW_HDMI=y
 CONFIG_DRM_LIMA=y
 CONFIG_FB_SIMPLE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y

arch/arm64/include/asm/irqflags.h

@@ -5,7 +5,6 @@
 #ifndef __ASM_IRQFLAGS_H
 #define __ASM_IRQFLAGS_H
 
-#include <asm/alternative.h>
 #include <asm/barrier.h>
 #include <asm/ptrace.h>
 #include <asm/sysreg.h>

arch/arm64/kernel/fpsimd.c

@@ -1535,6 +1535,27 @@ static void fpsimd_save_kernel_state(struct task_struct *task)
 	task->thread.kernel_fpsimd_cpu = smp_processor_id();
 }
 
+/*
+ * Invalidate any task's FPSIMD state that is present on this cpu.
+ * The FPSIMD context should be acquired with get_cpu_fpsimd_context()
+ * before calling this function.
+ */
+static void fpsimd_flush_cpu_state(void)
+{
+	WARN_ON(!system_supports_fpsimd());
+	__this_cpu_write(fpsimd_last_state.st, NULL);
+
+	/*
+	 * Leaving streaming mode enabled will cause issues for any kernel
+	 * NEON and leaving streaming mode or ZA enabled may increase power
+	 * consumption.
+	 */
+	if (system_supports_sme())
+		sme_smstop();
+
+	set_thread_flag(TIF_FOREIGN_FPSTATE);
+}
+
 void fpsimd_thread_switch(struct task_struct *next)
 {
 	bool wrong_task, wrong_cpu;
@@ -1552,7 +1573,7 @@ void fpsimd_thread_switch(struct task_struct *next)
 
 	if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) {
 		fpsimd_load_kernel_state(next);
-		set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
+		fpsimd_flush_cpu_state();
 	} else {
 		/*
 		 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
@@ -1842,27 +1863,6 @@ void fpsimd_flush_task_state(struct task_struct *t)
 	barrier();
 }
 
-/*
- * Invalidate any task's FPSIMD state that is present on this cpu.
- * The FPSIMD context should be acquired with get_cpu_fpsimd_context()
- * before calling this function.
- */
-static void fpsimd_flush_cpu_state(void)
-{
-	WARN_ON(!system_supports_fpsimd());
-	__this_cpu_write(fpsimd_last_state.st, NULL);
-
-	/*
-	 * Leaving streaming mode enabled will cause issues for any kernel
-	 * NEON and leaving streaming mode or ZA enabled may increase power
-	 * consumption.
-	 */
-	if (system_supports_sme())
-		sme_smstop();
-
-	set_thread_flag(TIF_FOREIGN_FPSTATE);
-}
-
 /*
  * Save the FPSIMD state to memory and invalidate cpu view.
  * This function must be called with preemption disabled.

arch/m68k/Kconfig

@@ -3,8 +3,8 @@ config M68K
 	bool
 	default y
 	select ARCH_32BIT_OFF_T
-	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DMA_PREP_COHERENT if M68K_NONCOHERENT_DMA && !COLDFIRE

arch/m68k/kernel/entry.S

@@ -430,7 +430,9 @@ resume:
 	movec	%a0,%dfc
 
 	/* restore status register */
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
+	movew	%a1@(TASK_THREAD+THREAD_SR),%d0
+	oriw	#0x0700,%d0
+	movew	%d0,%sr
 
 	rts
 

arch/m68k/mac/misc.c

@@ -453,30 +453,18 @@ void mac_poweroff(void)
 
 void mac_reset(void)
 {
-	if (macintosh_config->adb_type == MAC_ADB_II &&
-	    macintosh_config->ident != MAC_MODEL_SE30) {
-		/* need ROMBASE in booter */
-		/* indeed, plus need to MAP THE ROM !! */
-
-		if (mac_bi_data.rombase == 0)
-			mac_bi_data.rombase = 0x40800000;
-
-		/* works on some */
-		rom_reset = (void *) (mac_bi_data.rombase + 0xa);
-
-		local_irq_disable();
-		rom_reset();
 #ifdef CONFIG_ADB_CUDA
-	} else if (macintosh_config->adb_type == MAC_ADB_EGRET ||
-	           macintosh_config->adb_type == MAC_ADB_CUDA) {
+	if (macintosh_config->adb_type == MAC_ADB_EGRET ||
+	    macintosh_config->adb_type == MAC_ADB_CUDA) {
 		cuda_restart();
+	} else
 #endif
 #ifdef CONFIG_ADB_PMU
-	} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
+	if (macintosh_config->adb_type == MAC_ADB_PB2) {
 		pmu_restart();
+	} else
 #endif
-	} else if (CPU_IS_030) {
-
+	if (CPU_IS_030) {
 		/* 030-specific reset routine.  The idea is general, but the
 		 * specific registers to reset are '030-specific.  Until I
 		 * have a non-030 machine, I can't test anything else.
@@ -524,6 +512,18 @@ void mac_reset(void)
 		    "jmp %/a0@\n\t" /* jump to the reset vector */
 		    ".chip 68k"
 		    : : "r" (offset), "a" (rombase) : "a0");
+	} else {
+		/* need ROMBASE in booter */
+		/* indeed, plus need to MAP THE ROM !! */
+
+		if (mac_bi_data.rombase == 0)
+			mac_bi_data.rombase = 0x40800000;
+
+		/* works on some */
+		rom_reset = (void *)(mac_bi_data.rombase + 0xa);
+
+		local_irq_disable();
+		rom_reset();
 	}
 
 	/* should never get here */

arch/openrisc/kernel/process.c

@@ -65,7 +65,7 @@ void machine_restart(char *cmd)
 }
 
 /*
- * This is used if pm_power_off has not been set by a power management
+ * This is used if a sys-off handler was not set by a power management
  * driver, in this case we can assume we are on a simulator.  On
  * OpenRISC simulators l.nop 1 will trigger the simulator exit.
  */
@@ -89,10 +89,8 @@ void machine_halt(void)
 void machine_power_off(void)
 {
 	printk(KERN_INFO "*** MACHINE POWER OFF ***\n");
-	if (pm_power_off != NULL)
-		pm_power_off();
-	else
-		default_power_off();
+	do_kernel_power_off();
+	default_power_off();
 }
 
 /*