BGP MP test plan

BGP-MP test plan

• Overview
  • Scope
  • Testbed
• Setup configuration
  • Ansible scripts to setup and run test
    • bgp_mp.yml
  • Setup of DUT switch
• Test
• Test cases
• TODO
• Open questions

Overview

The purpose is to test functionality of BGP-MP on the SONIC switch DUT, closely resembling production environment. The test assumes all necessary configurations are already pre-configured on the SONIC switch before test runs.

Scope

The test is targeting a running SONIC system with fully functioning configuration. The purpose of the test is not to test specific API, but functional testing of BGP-MP on SONIC system.

Testbed

The test will run on the following testbeds:

• t0

Setup configuration

IPv4 BGP neighborship will be configured between DUT and exabgp and each neighbor will redistribute IPv6 routes to each other.

Ansible scripts to setup and run test

bgp_mp.yml

bgp_mp.yml when run with tag “bgp_mp” will do the following:

1. Generate and apply exabgp configuration.
2. Run test.
3. Clean up dynamic and temporary exabgp configuration.

Test

On PTF host, exabgp tool will be used to configure bgp peer and redistribute IPv6 routes via IPv4 BGP session.

Test cases

Test case # 1 – BGP-MP IPv6 routes over IPv4 session

Test objective

Verify that IPv6 routes are correctly redistributed over IPv4 BGP session.

Test steps

• Generate IPv4 BGP peer configuration for exabgp instance.
• Generate IPv6 routes, to be announced via IPv4 session, for exabgp instance.
• Run exabgp instance.
• Verify that IPv4 BGP neighborship is established.
• Redistribute IPv6 routes using exabgp.
• Verify that IPv6 routes are correctly redistributed to the DUT.
• Redistribute IPv6 routes from the DUT to exabgp.
• Verify that IPv6 routes are correctly redistributed to the exabgp.
• Set default configuration.

TODO

Open questions

• Should be some traffic test cases performed as part of this test?