Skip to content

Terragraph is a technology that leverages 60 GHz spectrum to deliver fast, reliable internet.

License

Notifications You must be signed in to change notification settings

terragraph/meta-terragraph

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

47 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Terragraph

Terragraph is a gigabit wireless technology designed to meet the growing demand for reliable high-speed internet access. Documentation for the project can be found at terragraph.com.

This repository contains a software framework to build a complete Linux image for the radio nodes.

Terragraph uses the Yocto Project as the underlying build framework.

File Structure

The Yocto naming pattern is used in this repository. A "meta-layer" is used to name a layer or a category of layers. A "recipe-abc" is used to name a bitbake recipe. The project itself exists as a meta layer on top of Poky, the reference distribution of the Yocto Project.

  • recipes-backports - Backported recipes.

  • recipes-bsp - Extensions to BSP (Board Support Package) recipes.

  • recipes-connectivity - Extensions to various Poky networking recipes.

  • recipes-core - Extensions to various core recipes.

  • recipes-extended - Various tweaks to standard Poky recipes.

  • recipes-facebook - Meta's recipes for end-to-end networking setup and monitoring.

  • recipes-kernel - Build a Linux kernel.

  • recipes-radio - 60GHz radio drivers and firmware.

  • recipes-support - Various third-party helper libraries and utilities.

  • recipes-utils - Various helper scripts.

  • recipes-wifi - Recipes specific to Puma's ESP32 wifi module.

  • meta-x86 - Terragraph layer for building specific to x86 processors and emulation.

  • meta-qoriq - Terragraph layer for building specific to NXP QorIQ processors.

  • meta-qca - Terragraph layer for building specific to QTI-based radios on top of meta-qoriq.

  • conf - Various bitbake configuration files.

  • docs - Terragraph documentation.

  • docusaurus - Terragraph static website.

  • licenses - Additional open source licenses for code used in the project.

  • src - Sources for various Meta components.

  • utils - Miscellaneous utility scripts.

Building

General Build Setup

The build process automatically fetches all necessary packages and builds the complete Yocto image.

Building complete Yocto images from scratch can be time-consuming. It is recommended that you set up a rather beefy machine or server with a flash storage device for clean builds. To greatly reduce disk usage requirements during builds, add INHERIT += "rm_work" to conf/local.conf in the build directory.

The Yocto Project's Quick Start Guide covers how to set up a machine for various platforms. Several Meta components require C++17 support and require a modern GCC to compile. There are also a couple of different embedded firmwares that can require additonal toolchains installed in /opt. The utils/docker/Dockerfile script contains an example for setting up an Ubuntu container to do meta-qca Puma-based builds. For other builds, the setup is similar except that the ESP32 toolchain is not required.

By default, the builds are set to run with number of CPUs as both the number of tasks and as the number of build threads. We have found that this can create race conditions while building various components which results in mysterious do_compilation task failures. These can be resolved by rerunning the bitbake command to retry the failed compilations.

Building the E2E Image

The e2e-image target builds a tarball for an x86 chroot environment that can be used as the Terragraph E2E controller. This build target is available for all hardware platforms and is a good introduction to the Terragraph E2E stack and userland.

  1. Set up the build environment based on the Yocto Project's Quick Start Guide.

  2. Clone the Terragraph sources.

$ git clone https://github.com/terragraph/meta-terragraph.git
$ cd meta-terragraph
  1. Clone poky and meta-openembedded repositories into the yocto subdirectory.
$ ./sync_yocto.sh
  1. Initialize a build directory. After this step you will be dropped into the build-x86 build directory.
$ source tg-init-build-env meta-x86 build-x86
  1. Start the build within the build directory. The build process automatically fetches all necessary packages and builds the complete image.
$ bitbake e2e-image
  1. Optionally run unit tests.
$ MY_BUILD_DIR=`pwd` ../utils/run_tests.sh

The final build result is build-x86/tmp/deploy/images/tgx86/e2e-image-tgx86.tar.gz. This is an x86 chroot environment suitable for use with the E2E controller.

Building the Terragraph Puma Radio Image

Puma is an NXP/QTI-based radio platform and is available to build if there is a top-level meta-qca directory. It requires radio firmware from QTI to build.

  1. Set up the build environment based on the Yocto Project's Quick Start Guide.

  2. Install the ESP32 toolchain which is required to build the firmware for Puma's ESP32 wifi module. The expected location of the ESP32 toolchain is /opt/esp32-toolchain/xtensa-esp32-elf. Set ESP32_TOOLCHAIN_PREFIX in esp-fw_0.1.bb for a different toolchain location. Note that the wifi firmware binaries and the script (flash_esp32) required to flash the wifi module are all part of the Puma image.

    If you don't want to build the ESP32 wifi firmware, then skip the ESP32 toolchain installation and remove the esp-fw package from any IMAGE_INSTALL variables or pass -R ../conf/no-esp-fw.conf to bitbake commands in later steps.

  3. Clone or untar the Terragraph sources.

$ git clone https://github.com/terragraph/meta-terragraph.git
$ cd meta-terragraph
  1. Clone poky and meta-openembedded repositories into the yocto subdirectory.
$ ./sync_yocto.sh
  1. Acquire the radio firmware from QTI. This will generally be the latest available OEM (original equipment manufacturer) firmware. Terragraph uses the 3pp file to install both the firmware blobs as well as several utilities. This file will have a form similar to qca6430-tg-1-0_qca_oem_3pp-r00083.1-0f0e6cdd976b960c43e4eb78e10def7470e82130.tar.gz but with a different hash. Drop this file into the yocto/source_mirrors directory created by ./sync_yocto.sh.

    Because the 3pp files vary from OEM to OEM, you may also have to edit the corresponding bitbake recipe include file to point at your filename and checksums, for example in meta-qca/recipes-radio/wigig-utils/tg-qca6430-DPDK-OEMR2-CSU4-2022-01-20-OEM-ver-10-11-0-99-3pp.inc.

  2. Initialize a build directory. After this step you will be dropped into the build-qca build directory.

$ source tg-init-build-env meta-qca build-qca
  1. Start the build within the build directory. The build process automatically fetches all necessary packages and builds the complete image.
$ bitbake terragraph-image

The final build result is build-qca/tmp/deploy/images/qoriq/tg-update-qoriq.bin. This file is a self-extracting image for the Puma radios. Run ./tg-update-qoriq.bin -h for usage instructions.

Community

Please review our Code of Conduct and Contributing Guidelines.

General discussions are held on our Discord server.

License

Terragraph is made up of different packages. Each package contains recipe files that detail where to fetch source code from third party sources or local directories. The recipe files themselves are provided under the MIT license in licenses/Meta-MIT, but your use of the code fetched by each recipe file is subject to the licenses of each respective third-party project. Local components are also specified under this MIT license unless otherwise stated.