Skip to content

Rexster Configuration

Jump to bottom
spmallette edited this page Nov 9, 2012 · 104 revisions

Rexster is configured through an XML configuration file with overriding command line options. Configuration for Rexster consists of options for server settings, like port assignments, and the list of available graphs served by Rexster with their allowed Extensions.

By default, Rexster will first try to read rexster.xml from the root of the working directory. If it cannot be found there, it will load the rexster.xml sample as a resource. To use a file other than those two, simply specify the file with -c on the Command Line at start:

rexster.sh -s -c my-rexster.xml

XML Configuration

The XML configuration file has a basic structure as follows:

<?xml version="1.0" encoding="UTF-8"?>
<rexster>
  <http>
    <server-port>8182</server-port>
    <server-host>0.0.0.0</server-host>
    <base-uri>http://localhost</base-uri>
    <web-root>public</web-root>
    <character-set>UTF-8</character-set>
    <enable-jmx>false</enable-jmx>
    <max-post-size>2097152</max-post-size>
    <max-header-size>8192</max-header-size>
    <upload-timeout-millis>30000</upload-timeout-millis>
    <thread-pool>
      <worker>
        <core-size>8</core-size>
        <max-size>8</max-size>
      </worker>
      <kernal>
        <core-size>4</core-size>
        <max-size>4</max-size>
      </kernal>
    </thread-pool>
    <io-strategy>worker</io-strategy>
  </http>
  <rexpro>
    <server-port>8184</server-port>
    <server-host>0.0.0.0</server-host>
    <session-max-idle>1790000</session-max-idle>
    <session-check-interval>3000000</session-check-interval>
    <thread-pool>
      <worker>
          <core-size>8</core-size>
        <max-size>8</max-size>
      </worker>
      <kernal>
        <core-size>4</core-size>
        <max-size>4</max-size>
      </kernal>
    </thread-pool>
    <io-strategy>worker</io-strategy>
  </rexpro>
  <shutdown-port>8183</shutdown-port>
  <shutdown-host>127.0.0.1</shutdown-host>
  <security>
    <authentication>
        <type>default</type>
        <configuration>
          <users>
            <user>
              <username>rexster</username>
              <password>rexster</password>
            </user>
          </users>
        </configuration>
    </authentication>
  </security>
  <graphs>
    <graph>
      <graph-name>gratefulgraph</graph-name>
      <graph-type>com.tinkerpop.rexster.config.TinkerGraphGraphConfiguration</graph-type>
      <graph-location>data/graph-example-2.xml</graph-location>
      <graph-read-only>false</graph-read-only>
      <extensions>
        <allows>
          <allow>tp:frames</allow>
        </allows>
      </extensions>
    </graph>
    ...
  </graphs>
</rexster>

http Section

The <http> section of rexster.xml controls REST API and Dog House configurations. The <server-port> and <server-host> allows configuration of the port and host on which Rexster will serve.

The <base-uri> defines the prefix for the URI that the Dog House will use for connecting to Rexster services. If this value is not specified, it will default to http://localhost. If this value is pointed at http://localhost, it is important to note that the Dog House will not be accessible from browsers other than the one on the local machine. To allow browsers on remote machines to connect, consider using the IP address of the machine that Rexster is installed upon. Furthermore, in standalone mode, Rexster assumes that both servers are being served through the same base URI in the same instance of Grizzly on different ports.

The <web-root> allows specification of the directory where the root of administration web site web site exists. The <character-set> configures the character set the request/response from Rexster REST services will support. If it is not specified then the Rexster will revert to ISO-8859-1. Rexster will also respect the Accept-Charset request header and revert back to the value of <character-set> if the header is not specified.

The <enable-jmx> element can be set to true or false (with the default being false). When set to true, Rexster will expose underlying Grizzly JMX MBeans in the com.sun.grizzly root.

The <max-post-size> controls the maximum size in bytes of the data being sent in POST operations to the REST API. The default value is about 2M.

The <max-header-size is the maximum size in bytes of the request header that Rexster will accept. The default value is 8K.

The <upload-timeout-millis is the number of milliseconds the REST API will accept an upload for. The default value is thirty seconds.

rexpro Section

The <server-port> and <server-host> represents the port and host on which the Rexster Console communicates to the Rexster server. This port utilizes RexPro, short for Rexster Protocol, which is a binary protocol.

The <session-max-idle> specifies the number of milliseconds that a RexPro session can stay idle before the session is destroyed. If this value is not specified, the default value of thirty minutes is used. The <session-check-interval> specifies the number of milliseconds between session idle checks. If this value is not specified, the default value of 50 minutes is used. In both cases, neither value can be set to anything less than one second.

Common Sections

Some elements are common to both the <http> and <rexpro> sections of rexster.xml.

The <thread-pool> element has multiple sub-sections beneath it and allow configuration of the number of available threads in the Grizzly thread pool. The settings are defaulted to the initial values provided by Grizzly. The available settings and the meanings of those settings for the <worker> pool and the <kernal> pool are identical. In both cases, the <core-size> represents the initial number of threads that will be present with the specified thread pool is created and the <max-size> represents the maximum number threads that may be maintained by the specified thread pool (see Grizzly User Guide).

Other Elements

The <rexster-shutdown-port> and <rexster-shutdown-host> allows configuration of the port and host on which Rexster will accept shutdown requests.

Rexster Security is managed through the <security> element. By default it is configured to be set to none as in:

<security>
  <authentication>
    <type>none</type>
  </authentication>
</security>

When configured in this fashion, Rexster accepts all incoming requests. The other option for configuration is default which requires the inclusion of the <configuration> element, as in:

<security>
  <authentication>
    <type>default</type>
    <configuration>
      <users>
        <user>
          <username>rexster</username>
          <password>rexster</password>
        </user>
      </users>
    </configuration>
  </authentication>
</security>

The <users> element allows specification of one or more <user> child elements which each must contain a <username> and <password> combination. These <user> elements represent the list of users that will have access to Rexster.

graphs Section

The <graphs> element will contain any number of <graph> configurations. Each <graph> element will equate to one graph being configured within Rexster. The exact contents of the <graph> element is dependent upon the type of graph implementation (OrientDB, neo4j, etc.) utilized (see Specific Graph Configurations). However, some key general rules exist for all graph configurations

  • The <graph-name> element must be unique within the list of configured graphs.
  • The <graph-enabled> element may be applied to any <graph>. Setting its contents to “false” will prevent that graph from loading to Rexster. If the element is not present at all (or set explicitly to true) the graph will be loaded.
  • The <graph-type> element is the full name of a class that implements the GraphConfiguration interface. The GraphConfiguration is responsible for using the properties supplied to it from the configuration file to produce a fully configured Graph instance. This approach allows a plug-in approach to providing new support for Graph implementations without requiring access to Rexster code. Please read the configuration options specific to each graph type below for more information on the expected values for this element.
  • The <graph-read-only> element will configure a graph so that its data cannot be modified. Set to true to enable this feature. If the element is not present graphs will default this value to false.
  • The <extensions> element defines the Extensions to be exposed for this graph. Within <extensions> there are two other elements: <allows> and <extension>.
    • The <allows> element defines a collection of <allow> elements where each contains the Extensions that are to be exposed for this graph. The value of the <allow> is an expression that consists of a namespace and extension name separated by a colon, as in namespace:extension. Wildcards are allowed where one wishes to configure all extensions in all namespaces identified by Rexster as denoted by *:* and where one wishes to configure all extensions within a given namespace as denoted by namespace:*.
    • Zero or more <extension> elements may exists within <extensions>. The purpose of this element is to pass graph specific configuration options to the Extension. These configurations will be Extension specific so be sure to check the individual configuration options for that Extension. There are three expected elements within an <extension> element: <namespace>, <name> and <configuration>.
      • The <namespace> element defines the namespace of the extension to be configured.
      • The <name> element defines the name of the extension to be configured.
      • The <configuration> contains Extension specific configuration options (refer to the specific Extension for what the contents of this element should be.
Clone this wiki locally