Update to latest versions of hyper and http-body #1882

davidpdrsn · 2023-03-23T22:26:45Z

Part of #1325

Mostly just mechanical changes. Nothing too complicated.

Overall changes:

Removes the dependency on hyper 0.14
Removes usage of hyper::Server in docs
Updates to the latest release candidates for hyper, http-body, and http-body-util
Updates body types to the new Body trait
Replaces usages of CompressionLayer with someone else, where appropriate
Tests that specifically needed compression were commented out
Examples that don't yet support hyper 1.0 were commented out
Make sure we don't expose things from http-body-util (such as Limited) in our public API

Even though we're still relying on patches in Cargo.toml it would be nice to merge this so we can make smaller patches going forward.

Blocked by downstreams updating

Update to http 1.0 rwf2/multer#59
New release of headers, technically just for axum-extra but would be nice to ship everything at the same time

When tower-http's compression stuff is done

Bring back the head_with_middleware_applied test. It uses tower-http's compression middleware which haven't been upgraded yet.
Fix link to CompressionLayer in axum/src/docs/middleware.md

… type (#1762)

Co-authored-by: David Pedersen <[email protected]>

Co-authored-by: Jonas Platte <[email protected]> Co-authored-by: Michael Scofield <[email protected]>

jplatte · 2023-03-23T22:59:25Z

So, will tower-http be much work?

davidpdrsn · 2023-03-23T23:06:34Z

I'm gonna find out tomorrow 😅 but I don't think so. Probably just a lot of code to port.

Cargo.toml

davidpdrsn · 2023-03-24T15:09:22Z

omg ci is green 🎉 I need a vacation when all this is done 😅

This reverts commit 5b3f2b6.

davidpdrsn · 2023-11-22T22:06:42Z

@jplatte it sounds like the next major version of multer (using http 1.0) could be a bit far off rwf2/multer#59 (comment) :/

To work around this in our multipart I think we should just eagerly convert the headers in the field to http 1.0. I've added that in b9983b6. It is a bit unfortunate having to do that because of the extra allocations but at least its just temporary and should enable more people to upgrade.

axum-core/src/body.rs

axum-core/src/ext_traits/request.rs

axum-extra/src/extract/multipart.rs

axum/CHANGELOG.md

axum/src/docs/routing/layer.md

axum/src/extract/multipart.rs

axum/src/lib.rs

jplatte · 2023-11-23T09:27:34Z

axum/src/lib.rs

+#[cfg(all(feature = "tokio", feature = "http1"))]
 pub mod serve;


http2-only is not supported?

Oh yes good catch! Change it to #[cfg(all(feature = "tokio", any(feature = "http1", feature = "http2")))]

axum/src/serve.rs

Co-authored-by: Jonas Platte <[email protected]>

This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [axum](https://github.com/tokio-rs/axum) | workspace.dependencies | minor | `0.6.20` -> `0.7.0` | | [inquire](https://github.com/mikaelmello/inquire) | workspace.dependencies | minor | `0.6.2` -> `0.7.0` | | [reqwest](https://github.com/seanmonstar/reqwest) | dependencies | minor | `0.11.18` -> `0.12.0` | | [webbrowser](https://github.com/amodm/webbrowser-rs) | dependencies | major | `0.8.10` -> `1.0.0` | --- ### Release Notes <details> <summary>tokio-rs/axum (axum)</summary> ### [`v0.7.5`](https://github.com/tokio-rs/axum/releases/tag/axum-v0.7.5): axum - v0.7.5 [Compare Source](tokio-rs/axum@axum-v0.7.4...axum-v0.7.5) - **fixed:** Fixed layers being cloned when calling `axum::serve` directly with a `Router` or `MethodRouter` ([#2586]) - **fixed:** `h2` is no longer pulled as a dependency unless the `http2` feature is enabled ([#2605]) [#2586]: tokio-rs/axum#2586 [#2605]: tokio-rs/axum#2605 ### [`v0.7.4`](https://github.com/tokio-rs/axum/releases/tag/axum-v0.7.4): axum - v0.7.4 [Compare Source](tokio-rs/axum@axum-v0.7.3...axum-v0.7.4) - **fixed:** Fix performance regression present since axum 0.7.0 ([#2483]) - **fixed:** Improve `debug_handler` on tuple response types ([#2201]) - **added:** Add `must_use` attribute to `Serve` and `WithGracefulShutdown` ([#2484]) - **added:** Re-export `axum_core::body::BodyDataStream` from axum [#2201]: tokio-rs/axum#2201 [#2483]: tokio-rs/axum#2483 [#2201]: tokio-rs/axum#2201 [#2484]: tokio-rs/axum#2484 ### [`v0.7.3`](https://github.com/tokio-rs/axum/releases/tag/axum-v0.7.3): axum - v0.7.3 [Compare Source](tokio-rs/axum@axum-v0.7.2...axum-v0.7.3) - **added:** `Body` implements `From<()>` now ([#2411]) - **change:** Update version of multer used internally for multipart ([#2433]) - **change:** Update tokio-tungstenite to 0.21 ([#2435]) - **added:** Enable `tracing` feature by default ([#2460]) - **added:** Support graceful shutdown on `serve` ([#2398]) - **added:** `RouterIntoService` implements `Clone` ([#2456]) [#2411]: tokio-rs/axum#2411 [#2433]: tokio-rs/axum#2433 [#2435]: tokio-rs/axum#2435 [#2460]: tokio-rs/axum#2460 [#2398]: tokio-rs/axum#2398 [#2456]: tokio-rs/axum#2456 ### [`v0.7.2`](https://github.com/tokio-rs/axum/releases/tag/axum-v0.7.2): axum - v0.7.2 [Compare Source](tokio-rs/axum@axum-v0.7.1...axum-v0.7.2) - **added:** Add `axum::body::to_bytes` ([#2373]) - **fixed:** Gracefully handle accept errors in `serve` ([#2400]) [#2373]: tokio-rs/axum#2373 [#2400]: tokio-rs/axum#2400 ### [`v0.7.1`](https://github.com/tokio-rs/axum/releases/tag/axum-v0.7.1): axum - v0.7.1 [Compare Source](tokio-rs/axum@axum-v0.7.0...axum-v0.7.1) - **fix**: Fix readme. ### [`v0.7.0`](https://github.com/tokio-rs/axum/releases/tag/axum-v0.7.0): axum - v0.7.0 [Compare Source](tokio-rs/axum@axum-v0.6.20...axum-v0.7.0) - **breaking:** Update public dependencies. axum now requires - [hyper](https://crates.io/crates/hyper) 1.0 - [http](https://crates.io/crates/http) 1.0 - [http-body](https://crates.io/crates/http-body) 1.0 - **breaking:** axum now requires [tower-http](https://crates.io/crates/tower-http) 0.5 - **breaking:** Remove deprecated `WebSocketUpgrade::max_send_queue` - **breaking:** The following types/traits are no longer generic over the request body (i.e. the `B` type param has been removed) ([#1751] and [#1789]): - `FromRequestParts` - `FromRequest` - `HandlerService` - `HandlerWithoutStateExt` - `Handler` - `LayeredFuture` - `Layered` - `MethodRouter` - `Next` - `RequestExt` - `RouteFuture` - `Route` - `Router` - **breaking:** axum no longer re-exports `hyper::Body` as that type is removed in hyper 1.0. Instead axum has its own body type at `axum::body::Body` ([#1751]) - **breaking:** `extract::BodyStream` has been removed as `body::Body` implements `Stream` and `FromRequest` directly ([#1751]) - **breaking:** Change `sse::Event::json_data` to use `axum_core::Error` as its error type ([#1762]) - **breaking:** Rename `DefaultOnFailedUpdgrade` to `DefaultOnFailedUpgrade` ([#1664]) - **breaking:** Rename `OnFailedUpdgrade` to `OnFailedUpgrade` ([#1664]) - **breaking:** `TypedHeader` has been move to `axum-extra` ([#1850]) - **breaking:** Removed re-exports of `Empty` and `Full`. Use `axum::body::Body::empty` and `axum::body::Body::from` respectively ([#1789]) - **breaking:** The response returned by `IntoResponse::into_response` must use `axum::body::Body` as the body type. `axum::response::Response` does this ([#1789]) - **breaking:** Removed the `BoxBody` type alias and its `box_body` constructor. Use `axum::body::Body::new` instead ([#1789]) - **breaking:** Remove `RawBody` extractor. `axum::body::Body` implements `FromRequest` directly ([#1789]) - **breaking:** The following types from `http-body` no longer implement `IntoResponse`: - `Full`, use `Body::from` instead - `Empty`, use `Body::empty` instead - `BoxBody`, use `Body::new` instead - `UnsyncBoxBody`, use `Body::new` instead - `MapData`, use `Body::new` instead - `MapErr`, use `Body::new` instead - **added:** Add `axum::extract::Request` type alias where the body is `axum::body::Body` ([#1789]) - **added:** Add `Router::as_service` and `Router::into_service` to workaround type inference issues when calling `ServiceExt` methods on a `Router` ([#1835]) - **breaking:** Removed `axum::Server` as it was removed in hyper 1.0. Instead use `axum::serve(listener, service)` or hyper/hyper-util for more configuration options ([#1868]) - **breaking:** Only inherit fallbacks for routers nested with `Router::nest`. Routers nested with `Router::nest_service` will no longer inherit fallbacks ([#1956]) - **fixed:** Don't remove the `Sec-WebSocket-Key` header in `WebSocketUpgrade` ([#1972]) - **added:** Add `axum::extract::Query::try_from_uri` ([#2058]) - **added:** Implement `IntoResponse` for `Box<str>` and `Box<[u8]>` (\[[#2035](tokio-rs/axum#2035)]) - **breaking:** Simplify `MethodFilter`. It no longer uses bitflags ([#2073]) - **fixed:** Fix bugs around merging routers with nested fallbacks ([#2096]) - **fixed:** Fix `.source()` of composite rejections ([#2030]) - **fixed:** Allow unreachable code in `#[debug_handler]` ([#2014]) - **change:** axum's MSRV is now 1.66 ([#1882]) - **added:** Implement `IntoResponse` for `(R,) where R: IntoResponse` ([#2143]) - **changed:** For SSE, add space between field and value for compatibility ([#2149]) - **added:** Add `NestedPath` extractor ([#1924]) - **added:** Add `handle_error` function to existing `ServiceExt` trait ([#2235]) - **breaking:** `impl<T> IntoResponse(Parts) for Extension<T>` now requires `T: Clone`, as that is required by the http crate ([#1882]) - **added:** Add `axum::Json::from_bytes` ([#2244]) - **added:** Implement `FromRequestParts` for `http::request::Parts` ([#2328]) - **added:** Implement `FromRequestParts` for `http::Extensions` ([#2328]) - **fixed:** Clearly document applying `DefaultBodyLimit` to individual routes ([#2157]) [#1664]: tokio-rs/axum#1664 [#1751]: tokio-rs/axum#1751 [#1762]: tokio-rs/axum#1762 [#1789]: tokio-rs/axum#1789 [#1835]: tokio-rs/axum#1835 [#1850]: tokio-rs/axum#1850 [#1868]: tokio-rs/axum#1868 [#1882]: tokio-rs/axum#1882 [#1924]: tokio-rs/axum#1924 [#1956]: tokio-rs/axum#1956 [#1972]: tokio-rs/axum#1972 [#2014]: tokio-rs/axum#2014 [#2021]: tokio-rs/axum#2021 [#2030]: tokio-rs/axum#2030 [#2058]: tokio-rs/axum#2058 [#2073]: tokio-rs/axum#2073 [#2096]: tokio-rs/axum#2096 [#2140]: tokio-rs/axum#2140 [#2143]: tokio-rs/axum#2143 [#2149]: tokio-rs/axum#2149 [#2157]: tokio-rs/axum#2157 [#2235]: tokio-rs/axum#2235 [#2244]: tokio-rs/axum#2244 [#2328]: tokio-rs/axum#2328 </details> <details> <summary>mikaelmello/inquire (inquire)</summary> ### [`v0.7.5`](https://github.com/mikaelmello/inquire/blob/HEAD/CHANGELOG.md#075---2024-04-23) [Compare Source](mikaelmello/inquire@v0.7.4...v0.7.5) - Fix user-provided ANSI escape codes from being removed when rendering. - Introduced on 0.7.0, this regression was making it impossible to have colorised text inside the prompt. - Now ANSI escape codes are properly emitted when rendering the prompt in the terminal. ### [`v0.7.4`](https://github.com/mikaelmello/inquire/blob/HEAD/CHANGELOG.md#074---2024-03-25) [Compare Source](mikaelmello/inquire@v0.7.3...v0.7.4) - Fix unexpected behaviors of `keep_filter` option in MultiSelect prompts: - Filter input is now correcly getting reset **only when** `keep_filter == false`. - When the filter input is reset, the list of options is now correctly reset as well. Thanks [@Swivelgames](https://github.com/Swivelgames) for reporting [#238](mikaelmello/inquire#238). ### [`v0.7.3`](https://github.com/mikaelmello/inquire/blob/HEAD/CHANGELOG.md#073---2024-03-21) [Compare Source](mikaelmello/inquire@v0.7.2...v0.7.3) - Fix cursor occasionally blinking in unexpected places. ### [`v0.7.2`](https://github.com/mikaelmello/inquire/blob/HEAD/CHANGELOG.md#072---2024-03-17) [Compare Source](mikaelmello/inquire@v0.7.1...v0.7.2) - Pressing Ctrl+D now cancels the prompt. Thanks [@mikecvet](https://github.com/mikecvet) for the PR! - Add support for `h` and `l` bindings when vim_mode is enabled on MultiSelect prompts, clearing or selecting all options respectively. Thanks [@afh](https://github.com/afh) for the PR! - Fix render issue [#233](mikaelmello/inquire#233) where cursor positioning at the end of a prompt was incorrect. Thanks [@msrd0](https://github.com/msrd0) and [@Sydonian](https://github.com/Sydonian) for reporting! ### [`v0.7.1`](https://github.com/mikaelmello/inquire/blob/HEAD/CHANGELOG.md#071---2024-03-10) [Compare Source](mikaelmello/inquire@v0.7.0...v0.7.1) - Fix render issue [#228](mikaelmello/inquire#228) when using `console` crate as the terminal backend. Thanks [@maospr](https://github.com/maospr) for reporting. ### [`v0.7.0`](https://github.com/mikaelmello/inquire/blob/HEAD/CHANGELOG.md#070---2024-02-24) [Compare Source](mikaelmello/inquire@v0.6.2...v0.7.0) ##### Breaking Changes - The Select and Multiselect Filter now scores input and is now expected to return an `Option<i64>`, making it possible to order/rank the list of options. [#176](mikaelmello/inquire#176) `None`: Will not be displayed in the list of options. `Some(score)`: score determines the order of options, higher score, higher on the list of options. - Improved user experience on Password prompts. When there is a validation error, the input is cleared if the password is rendered using the `Hidden` display mode, matching the user expectation of having to write the password from scratch again. Thanks to [@CM-IV](https://github.com/CM-IV) for the questions on [#149](mikaelmello/inquire#149)! - Allow lifetime customization of RenderConfig. [#101](mikaelmello/inquire#101). Thanks to [@arturfast](https://github.com/arturfast) for the suggestion [#95](mikaelmello/inquire#95). - Implement fuzzy search as default on Select and MultiSelect prompts. [#176](mikaelmello/inquire#176) - Revamped keybindings for DateSelect. ##### Features - Add one-liner helpers for quick scripts. [#144](mikaelmello/inquire#144). - Add new option on MultiSelect prompts to set all options to be selected by default. Thanks to [@conikeec](https://github.com/conikeec) for the suggestion ([#151](mikaelmello/inquire#151))! - Add new option on Select/MultiSelect prompts allowing to reset selection to the first item on filter-input changes. [#176](mikaelmello/inquire#176) - Emacs-like keybindings added where applicable: - Ctrl-p/Ctrl-n for up/down - Ctrl-b/Ctrl-f for left/right - Ctrl-j/Ctrl-g for enter/cancel - Vim keybindings are always supported in DateSelect prompts. - Added 'with_starting_filter_input' to both Select and MultiSelect, which allows for setting an initial value to the filter section of the prompt. - Added starting_input for CustomType. [#194](mikaelmello/inquire#194) - Added 'without_filtering' to both Select and MultiSelect, useful when you want to simplify the UX if the filter does not add any value, such as when the list is already short. - Added 'with_answered_prompt_prefix' to RenderConfig to allow customization of answered prompt prefix. - Improved rendering, with optimizations on incremental rendering and terminal resizing. ##### Fixes - Fixed typos in the code's comments. - Fixed issue where inquire, using termion, would crash when receiving piped inputs. ##### Dependency changes (some breaking) - Upgraded underlying `termion` crate from v1.5 to v2.0. - Upgraded underlying `bitflags` from v1 to v2, which affects the `Attributes` and `KeyModifiers` crates. If you use any of bitflag's methods directly, you might be affected, refer to the [bitflags changelog](https://github.com/bitflags/bitflags/releases/tag/2.0.0) for more information. - Removed `thiserror` dependency in favor of implementing `InquireError` by hand. [#146](mikaelmello/inquire#146) - Raised MSRV to 1.66 due to requirements in downstream dependencies. - MSRV is now explicitly set in the package definition. - Replaced `lazy_static` with `once_cell` as `once_cell::sync::Lazy` is being standardized and `lazy_static` is not actively maintained anymore. - Added `fuzzy-matcher` as an optional dependency for fuzzy filtering in Select and MultiSelect prompts [#176](mikaelmello/inquire#176) </details> <details> <summary>seanmonstar/reqwest (reqwest)</summary> ### [`v0.12.7`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0127) [Compare Source](seanmonstar/reqwest@v0.12.6...v0.12.7) - Revert adding `impl Service<http::Request<_>>` for `Client`. ### [`v0.12.6`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0126) [Compare Source](seanmonstar/reqwest@v0.12.5...v0.12.6) - Add support for `danger_accept_invalid_hostnames` for `rustls`. - Add `impl Service<http::Request<Body>>` for `Client` and `&'_ Client`. - Add support for `!Sync` bodies in `Body::wrap_stream()`. - Enable happy eyeballs when `hickory-dns` is used. - Fix `Proxy` so that `HTTP(S)_PROXY` values take precendence over `ALL_PROXY`. - Fix `blocking::RequestBuilder::header()` from unsetting `sensitive` on passed header values. ### [`v0.12.5`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0125) [Compare Source](seanmonstar/reqwest@v0.12.4...v0.12.5) - Add `blocking::ClientBuilder::dns_resolver()` method to change DNS resolver in blocking client. - Add `http3` feature back, still requiring `reqwest_unstable`. - Add `rustls-tls-no-provider` Cargo feature to use rustls without a crypto provider. - Fix `Accept-Encoding` header combinations. - Fix http3 resolving IPv6 addresses. - Internal: upgrade to rustls 0.23. ### [`v0.12.4`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0124) [Compare Source](seanmonstar/reqwest@v0.12.3...v0.12.4) - Add `zstd` support, enabled with `zstd` Cargo feature. - Add `ClientBuilder::read_timeout(Duration)`, which applies the duration for each read operation. The timeout resets after a successful read. ### [`v0.12.3`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0123) [Compare Source](seanmonstar/reqwest@v0.12.2...v0.12.3) - Add `FromStr` for `dns::Name`. - Add `ClientBuilder::built_in_webpki_certs(bool)` to enable them separately. - Add `ClientBuilder::built_in_native_certs(bool)` to enable them separately. - Fix sending `content-length: 0` for GET requests. - Fix response body `content_length()` to return value when timeout is configured. - Fix `ClientBuilder::resolve()` to use lowercase domain names. ### [`v0.12.2`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0122) [Compare Source](seanmonstar/reqwest@v0.12.1...v0.12.2) - Fix missing ALPN when connecting to socks5 proxy with rustls. - Fix TLS version limits with rustls. - Fix not detected ALPN h2 from server with native-tls. ### [`v0.12.1`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0121) [Compare Source](seanmonstar/reqwest@v0.12.0...v0.12.1) - Fix `ClientBuilder::interface()` when no TLS is enabled. - Fix `TlsInfo::peer_certificate()` being truncated with rustls. - Fix panic if `http2` feature disabled but TLS negotiated h2 in ALPN. - Fix `Display` for `Error` to not include its source error. ### [`v0.12.0`](https://github.com/seanmonstar/reqwest/blob/HEAD/CHANGELOG.md#v0120) [Compare Source](seanmonstar/reqwest@v0.11.27...v0.12.0) - Upgrade to `hyper`, `http`, and `http-body` v1. - Add better support for converting to and from `http::Request` and `http::Response`. - Add `http2` optional cargo feature, default on. - Add `charset` optional cargo feature, default on. - Add `macos-system-configuration` cargo feature, default on. - Change all optional dependencies to no longer be exposed as implicit features. - Add `ClientBuilder::interface(str)` to specify the local interface to bind to. - Experimental: disables the `http3` feature temporarily. #### v0.11.27 - Add `hickory-dns` feature, deprecating `trust-dns`. - (wasm) Fix `Form::text()` to not set octet-stream for plain text fields. #### v0.11.26 - Revert `system-configuration` upgrade, which broke MSRV on macOS. #### v0.11.25 - Fix `Certificate::from_pem_bundle()` parsing. - Fix Apple linker errors from detecting system proxies. #### v0.11.24 - Add `Certificate::from_pem_bundle()` to add a bundle. - Add `http3_prior_knowledge()` to blocking client builder. - Remove `Sync` bounds requirement for `Body::wrap_stream()`. - Fix HTTP/2 to retry `REFUSED_STREAM` requests. - Fix instances of converting `Url` to `Uri` that could panic. #### v0.11.23 - Add `Proxy::custom_http_auth(val)` for setting the raw `Proxy-Authorization` header when connecting to proxies. - Fix redirect to reject locations that are not `http://` or `https://`. - Fix setting `nodelay` when TLS is enabled but URL is HTTP. - (wasm) Add `ClientBuilder::user_agent(val)`. - (wasm) add `multipart::Form::headers(headers)`. #### v0.11.22 - Fix compilation on Windows when `trust-dns` is enabled. #### v0.11.21 - Add automatically detecting macOS proxy settings. - Add `ClientBuilder::tls_info(bool)`, which will put `tls::TlsInfo` into the response extensions. - Fix trust-dns resolver from possible hangs. - Fix connect timeout to be split among multiple IP addresses. #### v0.11.20 - Fix `deflate` decompression back to using zlib, as outlined in the spec. #### v0.11.19 - Add `ClientBuilder::http1_ignore_invalid_headers_in_responses()` option. - Add `ClientBuilder::http1_allow_spaces_after_header_name_in_responses()` option. - Add support for `ALL_PROXY` environment variable. - Add support for `use_preconfigured_tls` when combined with HTTP/3. - Fix `deflate` decompression from using the zlib decoder. - Fix `Response::{text, text_with_charset}()` to strip BOM characters. - Fix a panic when HTTP/3 is used if UDP isn't able to connect. - Fix some dependencies for HTTP/3. - Increase MSRV to 1.63. #### v0.11.18 - Fix `RequestBuilder::json()` method from overriding a previously set `content-type` header. An existing value will be left in place. - Upgrade internal dependencies for rustls and compression. #### v0.11.17 - Upgrade internal dependencies of Experimental HTTP/3 to use quinn v0.9 - (wasm) Fix blob url support #### v0.11.16 - Chore: set MSRV in `Cargo.toml`. - Docs: fix build on docs.rs #### v0.11.15 - Add `RequestBuilder` methods to split and reconstruct from its parts. - Add experimental HTTP/3 support. - Fix `connection_verbose` to log `write_vectored` calls. - (wasm) Make requests actually cancel if the future is dropped. #### v0.11.14 - Adds `Proxy::no_proxy(url)` that works like the NO_PROXY environment variable. - Adds `multipart::Part::headers(headers)` method to add custom headers. - (wasm) Add `Response::bytes_stream()`. - Perf: several internal optimizations reducing copies and memory allocations. #### v0.11.13 - Add `ClientBuilder::dns_resolver()` option for custom DNS resolvers. - Add `ClientBuilder::tls_sni(bool)` option to enable or disable TLS Server Name Indication. - Add `Identity::from_pkcs8_pem()` constructor when using `native-tls`. - Fix `redirect::Policy::limited(0)` from following any redirects. #### v0.11.12 - Add `ClientBuilder::resolve_to_addrs()` which allows a slice of IP addresses to be specified for a single host. - Add `Response::upgrade()` to await whether the server agrees to an HTTP upgrade. #### v0.11.11 - Add HTTP/2 keep-alive configuration methods on `ClientBuilder`. - Add `ClientBuilder::http1_allow_obsolete_multiline_headers_in_responses()`. - Add `impl Service<Request>` for `Client` and `&'_ Client`. - (wasm) Add `RequestBuilder::basic_auth()`. - Fix `RequestBuilder::header` to not override `sensitive` if user explicitly set on a `HeaderValue`. - Fix rustls parsing of elliptic curve private keys. - Fix Proxy URL parsing of some invalid targets. #### v0.11.10 - Add `Error::url()` to access the URL of an error. - Add `Response::extensions()` to access the `http::Extensions` of a response. - Fix `rustls-native-certs` to log an error instead of panicking when loading an invalid system certificate. - Fix passing Basic Authorization header to proxies. #### v0.11.9 - Add `ClientBuilder::http09_responses(bool)` option to allow receiving HTTP/0.9 responses. - Fix HTTP/2 to retry requests interrupted by an HTTP/2 graceful shutdown. - Fix proxy loading from environment variables to ignore empty values. #### v0.11.8 - Update internal webpki-roots dependency. #### v0.11.7 - Add `blocking::ClientBuilder::resolve()` option, matching the async builder. - Implement `From<tokio::fs::File>` for `Body`. - Fix `blocking` request-scoped timeout applying to bodies as well. - (wasm) Fix request bodies using multipart vs formdata. - Update internal `rustls` to 0.20. #### v0.11.6 - (wasm) Fix request bodies more. #### v0.11.5 - Add `ClientBuilder::http1_only()` method. - Add `tls::Version` type, and `ClientBuilder::min_tls_version()` and `ClientBuilder::max_tls_version()` methods. - Implement `TryFrom<Request>` for `http::Request`. - Implement `Clone` for `Identity`. - Fix `NO_PROXY`environment variable parsing to more closely match curl's. Comma-separated entries are now trimmed for whitespace, and `*` is allowed to match everything. - Fix redirection to respect `https_only` option. - (wasm) Add `Body::as_bytes()` method. - (wasm) Fix sometimes wrong conversation of bytes into a `JsValue`. - (wasm) Avoid dependency on serde-serialize feature. #### v0.11.4 - Add `ClientBuilder::resolve()` option to override DNS resolution for specific domains. - Add `native-tls-alpn` Cargo feature to use ALPN with the native-tls backend. - Add `ClientBuilder::deflate()` option and `deflate` Cargo feature to support decoding response bodies using deflate. - Add `RequestBuilder::version()` to allow setting the HTTP version of a request. - Fix allowing "invalid" certificates with the `rustls-tls` backend, when the server uses TLS v1.2 or v1.3. - (wasm) Add `try_clone` to `Request` and `RequestBuilder` #### v0.11.3 - Add `impl From<hyper::Body> for reqwest::Body`. - (wasm) Add credentials mode methods to `RequestBuilder`. #### v0.11.2 - Add `CookieStore` trait to customize the type that stores and retrieves cookies for a session. - Add `cookie::Jar` as a default `CookieStore`, easing creating some session cookies before creating the `Client`. - Add `ClientBuilder::http2_adaptive_window()` option to configure an adaptive HTTP2 flow control behavior. - Add `ClientBuilder::http2_max_frame_size()` option to adjust the maximum HTTP2 frame size that can be received. - Implement `IntoUrl` for `String`, making it more convenient to create requests with `format!`. #### v0.11.1 - Add `ClientBuilder::tls_built_in_root_certs()` option to disable built-in root certificates. - Fix `rustls-tls` glue to more often support ALPN to upgrade to HTTP/2. - Fix proxy parsing to assume `http://` if no scheme is found. - Fix connection pool idle reaping by enabling hyper's `runtime` feature. - (wasm) Add `Request::new()` constructor. </details> <details> <summary>amodm/webbrowser-rs (webbrowser)</summary> ### [`v1.0.1`](https://github.com/amodm/webbrowser-rs/blob/HEAD/CHANGELOG.md#101---2024-05-06-a-name101a) [Compare Source](amodm/webbrowser-rs@v1.0.0...v1.0.1) ##### Added - Support for visionOS. See PR [#86](amodm/webbrowser-rs#86) and [#87](amodm/webbrowser-rs#87) ### [`v1.0.0`](https://github.com/amodm/webbrowser-rs/blob/HEAD/CHANGELOG.md#100---2024-04-20-a-name100a) [Compare Source](amodm/webbrowser-rs@v0.8.15...v1.0.0) ##### Added - Move to 1.0! MSRV has now been defined too. ##### Fixed - Unix: default to standard unix implementation, instead of whitelisting each flavour of unix - WASM: return an error on dry_run if window object isn't available </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Enabled. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 👻 **Immortal**: This PR will be recreated if closed unmerged. Get [config help](https://github.com/renovatebot/renovate/discussions) if that's undesired. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Renovate Bot](https://github.com/renovatebot/renovate).  Reviewed-on: https://git.front.kjuulh.io/kjuulh/coffee/pulls/14

davidpdrsn and others added 11 commits March 23, 2023 20:21

Start working on v0.7.0

807aa59

Add axum_core::body::Body (#1584)

8238ca7

Change sse::Event::json_data to use axum_core::Error as its error…

280efc4

… type (#1762)

Fix typo in extract::ws (#1664)

f902f74

Co-authored-by: David Pedersen <[email protected]>

Remove B type param (#1751)

a4b7d38

Co-authored-by: Jonas Platte <[email protected]> Co-authored-by: Michael Scofield <[email protected]>

Add Body::from_stream (#1848)

0d50d17

Remove B type param: Follow ups (#1789)

2ae0cdf

Co-authored-by: Jonas Platte <[email protected]> Co-authored-by: Michael Scofield <[email protected]>

Add serve function and remove Server re-export (#1868)

d153719

Remove IntoResponse for http-body types (#1877)

49183e4

update deps

44bb38d

Update to hyper 1.0-rc.3 and http-body-util 0.1.0-rc.2

c73b6a9

davidpdrsn added the S-blocked Status: marked as blocked ❌ on something else such as a PR or other implementation work. label Mar 23, 2023

davidpdrsn mentioned this pull request Mar 24, 2023

Upgrade to http-body 1.0 tower-rs/tower-http#348

Merged

6 tasks

use tower-http patch

11a543a

davidpdrsn commented Mar 24, 2023

View reviewed changes

Cargo.toml Outdated Show resolved Hide resolved

davidpdrsn added 9 commits March 24, 2023 15:15

fix docs

1fd6dbb

remove Limited from public API

f1c0b11

serve also requires hyper/http1

b1e9930

more cfgs

91bebd8

handle additional error wrapping

7dece69

don't need this import

69a413c

tower-http's compression middleware which haven't been upgraded yet

aa6fe6d

format

f0348be

convert test to use hyper's low level client

82350cc

davidpdrsn force-pushed the v0.7.0 branch from ac09dd8 to 3a1c797 Compare April 21, 2023 08:41

Base automatically changed from v0.7.0 to main April 21, 2023 15:45

davidpdrsn mentioned this pull request Apr 21, 2023

Hyper 1.0 support #1325

Closed

davidpdrsn mentioned this pull request Nov 19, 2023

Update Cargo.toml http = 1.0.0 #2327

Closed

davidpdrsn added 7 commits November 19, 2023 11:43

compression is back

90b713d

fix error I missed before

ae0b890

update tower-http patch

820fb5a

does using -Z direct-minimal-versions fix msrv tests?

5b3f2b6

add typos-cli config to allow some false positives

b49ba58

Revert "does using -Z direct-minimal-versions fix msrv tests?"

6d4fd57

This reverts commit 5b3f2b6.

fix crc32fast

770ec7d

davidpdrsn mentioned this pull request Nov 19, 2023

Implement FromRequestParts for Parts and Extensions #2328

Merged

Add [Body::into_data_stream]

207f346

leotaku mentioned this pull request Nov 20, 2023

Upgrade to http and http_body 1.0.0 leotaku/tower-livereload#6

Closed

use published tower-http 0.5

f93a242

This was referenced Nov 21, 2023

support tower-http 0.5 #2332

Closed

Trait Bound Tracing Error #2334

Closed

convert multer's Field headers to http 1.0

b9983b6

qwandor mentioned this pull request Nov 22, 2023

Bump tower-http from 0.4.4 to 0.5.0 qwandor/dancelist#294

Closed

jplatte approved these changes Nov 23, 2023

View reviewed changes

davidpdrsn and others added 6 commits November 23, 2023 11:42

avoid some clones

8879fa4

bring back CompressionLayer in example

3c1c453

format imports

dee6bff

make serve also work with http2 only

4a02fba

Apply suggestions from code review

10bb477

Co-authored-by: Jonas Platte <[email protected]>

Update axum/src/lib.rs

64b2e39

Co-authored-by: Jonas Platte <[email protected]>

davidpdrsn enabled auto-merge (squash) November 23, 2023 10:55

davidpdrsn merged commit 43b14a5 into main Nov 23, 2023
18 checks passed

davidpdrsn deleted the david/hyper-1.0-rc.x branch November 23, 2023 11:03

Gumichocopengin8 mentioned this pull request Nov 28, 2023

fix: back to forbid unsafe #2365

Merged

rrichardson mentioned this pull request Apr 18, 2024

Support hyper 1.0 hyperium/tonic#1307

Open

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update to latest versions of hyper and http-body #1882

Update to latest versions of hyper and http-body #1882

davidpdrsn commented Mar 23, 2023 •

edited

Loading

jplatte commented Mar 23, 2023

davidpdrsn commented Mar 23, 2023

davidpdrsn commented Mar 24, 2023

davidpdrsn commented Nov 22, 2023

jplatte Nov 23, 2023

davidpdrsn Nov 23, 2023

		#[cfg(all(feature = "tokio", feature = "http1"))]
		pub mod serve;

Update to latest versions of hyper and http-body #1882

Update to latest versions of hyper and http-body #1882

Conversation

davidpdrsn commented Mar 23, 2023 • edited Loading

Blocked by downstreams updating

When tower-http's compression stuff is done

jplatte commented Mar 23, 2023

davidpdrsn commented Mar 23, 2023

davidpdrsn commented Mar 24, 2023

davidpdrsn commented Nov 22, 2023

jplatte Nov 23, 2023

Choose a reason for hiding this comment

davidpdrsn Nov 23, 2023

Choose a reason for hiding this comment

davidpdrsn commented Mar 23, 2023 •

edited

Loading