Skip to content

Ansible role that installs and manages the Docker Engine. Has support for managing Commercial vs Open Source, Storage, Credentialing and more.

License

Notifications You must be signed in to change notification settings

umich-arc/ansible-role-docker

Repository files navigation

Ansible Role: Docker

This role manages the install and configuration of the Docker Engine with support for credential management and custom storage provisioning. It has been tested with CentOS 7.3, Debian Jessie, Ubuntu Trusty, and Ubuntu Xenial. RHEL 7.x is loosely supported.

Build Status

Index


Requirements

This role depends on Ansible 2.2 or greater for full functionality.

NOTE: Version 2.x.x and above of this role ONLY supports the YY.MM style release schema (e.g. docker-ce-17.03.1). For older releases (e.g. docker-engine-1.13.1) please use the 1.x.x version of this role.

NOTE: Docker Inc. no longer uses publicly accessible repos for their Enterprise Edition. With version 2.0.0 of this role, support for enterprise repo management has been removed. However, it is still capable of managing and installing Enterprise Edition.

Dependencies

The python library docker or docker-py is a requirement for any components of the role outside of installing the Docker-Engine itself. However the role will take care of installing the correct version, if so configured.

NOTE: As of 4/13/2017 Ansible does not support the 2.0.2+ python library. Support is slated for the Ansible 2.4 release. For further information, please see the GitHub Issue here: ansible/ansible#22993

Role Variables

Execution Control

Enables or disables specific components of the Docker Role.

Variable Name Default Description
external_dependency_delay 20 The time in seconds between external dependency retries. (repos, keyservers, etc)
external_dependency_retries 6 The number of retries to attempt accessing an external dependency.
docker_manage_py true Installs python docker library, either from repo or pip. Note: This is required for container, credential, image and network management.
docker_manage_engine_repo true Manages the Docker repo. Provides support for both the Open Source and Commercially Supported Repositories.
docker_manage_engine_storage false If true, the storage driver for the Docker Engine will be managed by the role. No storage-driver or storage-opt should be supplied manually.
docker_manage_engine_users true Creates and manages a docker group that is granted rights to interact with Docker.
docker_manage_registry_credentials true Manages the credentials for a supplied list of registries. Note: Requires docker lib.
docker_manage_engine_networks true Enables Management of Docker Container Networks. Note: Requires docker lib.
docker_manage_images true Manages lifecycle of Container Images. Note: Requires docker lib.
docker_manage_containers true Enables Management of Docker Container Execution. Note: Requires docker lib.

Docker Python Library

Manages the installation of the Python Docker library. if a version is supplied that is 2.0.0 or greater, the older docker-py package will be removed and the newer docker package installed in it's place.

Variable Default Options Description
docker_py_install pip pip or pkg Type of installation. Either from pip or package.
docker_py_pip_extra_args - - Extra arguments to pass to pip during execution. e.g. -i <local pypi mirror>
docker_py_pip_upgrade true true or false Allow for pip to be upgraded during the install process.
docker_py_version - - The version of the docker library to install. Defaults to latest.

Docker Engine Repository

Controls the repository configuration of the Docker Engine.

Variable Name Default Options Description
docker_engine_architecture amd64 amd64 or armhf Specifies intended architecture. NOTE: armhf is ONLY supported on Ubuntu and Debian based distros.
docker_engine_channel stable stable or edge Specifies whether to use the stable or edge release channel. For more information see the Docker Installation Documentation
docker_engine_edition ce ce or ee Use the Community Edition(CE) or Enterprise Edition(EE). NOTE: Enterprise Edition repo CANNOT be managed by the role.
docker_engine_repo_gpg_key_server sks-keyservers.net - The keyserver to use for the validation of the repository gpg keys.
docker_engine_repo_ce_deb_gpg_key 0x8D81803C0EBFCD88 - The gpg key used for the CE deb based repository.
docker_engine_repo_ce_rpm_gpg_key 0xc52feb6b621e9f35 - The gpg key used for the CE rpm based repository.

Docker Engine Storage Configuration

Manages the Docker Engine storage driver, and in certain circumstances the storage underneath it. Comparing the different storage options is out of scope for this document; however further information can be found here: https://docs.docker.com/engine/userguide/storagedriver/selectadriver/.

Note: For all storage drivers, the storage_opts must be passed in the form of an array of items. For more information regarding the available and specific storage options for each driver, please see the docs here: https://docs.docker.com/v1.10/engine/reference/commandline/daemon/

Storage Support Matrix:

aufs btrfs devicemapper (lvm-direct) overlay overlay2
CentOS 7.3 - x x x -
Debian 8 (Jessie) x x - - -
RHEL 7.3 - x x x -
Ubuntu 14.04 (Trusty) x x - - -
Ubuntu 16.04 (Xenial) x x - x x
Variable Name Default Options Description
docker_engine_storage_driver - aufs, btrfs, devicemapper, and overlay The Storage driver to use with the Docker Engine
docker_engine_storage_config - - A hash containing the information for the driver supplied by docker_engine_storage_driver

aufs

Variable Name Default Description
docker_engine_storage_driver aufs -
graph /var/lib/docker The root directory of the docker runtime
storage_opts - Optional Storage Opts to pass to the Docker Daemon

btrfs

Variable Name Default Description
docker_engine_storage_driver btrfs -
device - REQUIRED The device or partition (e.g. /dev/sdb) intended to be used and managed by Docker.
graph /var/lib/docker The root directory of the docker runtime
mkfs_opts - Additional parameters to pass to mkfs.btrfs during volume creation.
mount_opts defaults Mount parameters to use for the btrfs Docker volume.
storage_opts - Optional Storage Opts to pass to the Docker Daemon

devicemapper (lvm-direct)

NOTE: Not all errors are captured correctly during thinpool creation. There is a verification task that short-circuits the run at the end of lvm configuration if it detected as not being properly set. For the role to be re-run again, the lvm volume group must be manually removed (vgremove <vgname>). This is an intentional behaviour to prevent any sort of accidental data loss.

Variable Name Default Description
docker_engine_storage_driver devicemapper -
device - REQUIRED The device or partition (e.g. /dev/sdb) intended to be used and managed by Docker.
vg_name docker-vg The name of the Docker Volume Group.
vg_opts - Optional parameters to use during Volume Group creation.
lv_name thinpool The Logical Volume thinpool name.
lv_data_opts --wipesignatures y Parameters to pass during creation of the data logical volume.
lv_metadata_opts --wipesignatures y Parameters to pass during creation of the metadata logical volume.
thinpool_autoextend_threshold 80 The percentage full value that defines when the thin pool Logical Volume should be extended.
thinpool_autoextend_percent 20 The percent value (in relation to it's current size) of how much additional space should be added to thin pool Logical Volume from the Volume Group.
data_share 95 The percent value of the space of the Volume Group to be assigned to the data Logical Volume.
metadata_share 1 The percent value of the space of the Volume Group to be assigned to the metadata Logical Volume.
storage_opts [ 'dm.use_deferred_removal=true'] Optional Storage Opts to pass to the Docker Daemon

overlay

Variable Name Default Description
docker_engine_storage_driver overlay -
graph /var/lib/docker The root directory of the docker runtime
storage_opts - Optional Storage Opts to pass to the Docker Daemon

overlay2

Variable Name Default Description
docker_engine_storage_driver overlay2 -
graph /var/lib/docker The root directory of the docker runtime
storage_opts - Optional Storage Opts to pass to the Docker Daemon

Docker Engine

These parameters control the Docker Engine, and the Docker Engine Daemon.

Note: If docker_manage_engine_storage is enabled, storage-opt should not be supplied in the docker_engine_opts hash, and should instead be controlled through docker_engine_storage_config.storage_opts.

Variable Name Default Description
docker_engine_version - The version of the Docker Engine to install. If not supplied, the latest will be installed.
docker_engine_env_vars - A hash of key-value pairs to pass to the Docker Engine as environment variables.
docker_engine_opts - A hash of key-[array of value] pairs that will be used as Docker Engine options. e.g. dns: [ '8.8.8.8', '8.8.4.4']

Docker Engine Users and Groups

Manages access to the docker group on a host.

Variable Name Default Description
docker_engine_users - An array of usernames to be added to the docker group. These users will be able to execute docker without sudo rights.

Docker Engine Registry Credentials

Manages authentication to Docker registries. Configuration is supplied via an array of hashes, with each hash containing key/value pairs of the options available to the Docker Login Module. For a full list of options and defaults, please see the Ansible docs on the docker_login module.

Variable Name Description
docker_registry_credentials Array of hashes containing Docker registry configuration.

Container Networks

Manages the creation and deletion of Docker Networks. Networks are managed via an array of hashes, each of which contains a network config as supplied by the options available to the Docker Network module. For a full list of options and defaults, please the Ansible docs on the docker_network module.

Variable Name Description
docker_networks Array of hashes containing Docker Network configuration.

Container Images

Manages all aspects of a container image lifecycle. Images are managed by an array of hashes containing the container image configuration. For a reference of available options, see Ansible docs regarding the docker_image module.

Variable Name Description
docker_images Array of hashes containing Docker Images configuration.

Container Execution

Manages Container runtime execution. Containers are managed by an array of hashes containing the container configuration. For a reference of available options, see Ansible docs regarding the docker_container module.

Variable Name Description
docker_containers Array of hashes containing Docker Container configuration.

Example Playbook

A variety of examples may be found in the tests directory.

---
- name: docker
  hosts: all
  connection: local
  gather_facts: True
  tags:
   - 'docker'
  vars:
    docker_manage_py: true
    docker_manage_engine_repo: true
    docker_manage_engine_storage: true
    docker_manage_engine_users: true
    docker_manage_registry_credentials: true
    docker_manage_images: true
    docker_manage_containers: true
    docker_engine_version: '1.12.1'
    docker_engine_storage_driver: devicemapper
    docker_engine_storage_config:
      device: /dev/sdb
    docker_engine_env_vars:
      DOCKER_HOST: /var/run/docker.sock
      TLS_VERIFY: TRUE
    docker_engine_opts:
      dns:
        - '8.8.8.8'
        - '8.8.4.4'
    docker_engine_users:
      - vagrant
    docker_registry_credentials:
      - username: test
        password: testpass
        registry: registry.example.com
    docker_images:
      - name: nginx
        tag: '1.10.1-alpine'
    docker_containers:
      - name: nginx
        image: 'nginx:1.10.1-alpine'
    docker_networks:
      - name: testnet
        driver_options:
          com.docker.network.bridge.name: testnet1
        ipam_options:
          subnet: '10.255.13.1/24'
          gateway: '10.255.13.1'

Testing and Contributing

Please see the CONTRIBUTING.md document in the repo.

License

MIT

Author Information

Created by Bob Killen, maintained by the Department of Advanced Research Computing and Technical Services of the University of Michigan.

About

Ansible role that installs and manages the Docker Engine. Has support for managing Commercial vs Open Source, Storage, Credentialing and more.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published