Releases: vossstef/tang_nano_20k_c64
Tang Mega 60k support
New feature(s)
- Tang Mega 60k support
Important
- Tang Nano 20k .fs unchanged / identical to previous version 1.66
Note
Bugfixes
- OSD XML / FPGA Companion Tape loader mountpoint fix for initial configuration
- TM138k Pro Paddle handling for 2nd Dualshock
Note
Known Defects
- Unwanted noise in NTSC Video mode reported in a single specific Monitor configuration.
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
FPGA Companion and OSD XML included. For proper operation both firmware and XML need to be used.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
Freezer CRT support & Bugfixes
New feature(s)
- Freeze support (e.g. Action Replay CRT)
- CRT Cartridge unload via OSD
Important
- To make use of some Freezer CRT it might be required to use the standard 64 Kernal and C1541 ROM.
- TP25k now needs the TFcard V2 PMOD !
Note
Bugfixes
- broken Multicard CRT ROM load fixed
- broken CRT load after power-up fixed
- Core to FPGA-companion Firmware compatibility improved
- broken TP25k sd card operation with TFcard V2 fixed (Digilent compatible)
- G64 Disk image support fixed
- Modem Status for USERPORT VIC-1011 RS232 mode fixed
Note
Known Defects
- Unwanted noise in NTSC Video mode reported in a single specific Monitor configuration.
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
FPGA Companion and OSD XML included. For proper operation both firmware and XML need to be used.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
v1.6.5
New feature(s)
- Freeze support (e.g. Action Replay CRT)
- CRT Cartridge unload via OSD
Important
- To make use of some Freezer CRT it might be required to use the standard 64 Kernal and C1541 ROM.
- TP25k now needs the TFcard V2 PMOD !
Note
Bugfixes
- broken Multicard CRT ROM load fixed
- broken CRT load after power-up fixed
- Core to FPGA-companion Firmware compatibility improved
- broken TP25k sd card operation with TFcard V2 fixed (Digilent compatible)
- G64 Disk image support fixed
- Modem Status for USERPORT RS232 mode fixed
Note
Known Defects
- none
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
Both FPGA Companion and MisteryNano Firmware included. Older variant MisteryNano as back-up.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
v1.6.4
v1.6.3
- FreezerCRT support (e.g. Action Replay, Snippy ROM etc.)
- CRT Cartridge unload via OSD
Important
To make use of some Freezer CRT it might be required to use the standard 64 Kernal and C1541 ROM.
TP25k now needs the TFcard V2 PMOD !
Note
Bugfixes
- broken Multicard CRT ROM load fixed
- broken CRT load after power-up fixed
- Core to FPGA-companion Firmware compatibility improved
- broken PAL / NTSC mode switch fixed
- broken TP25k sd card operation with TFcard fixed
- lag issue of v1.62 fixed
Note
Known Defects
- RGB LED dimmed
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
Both FPGA Companion and MisteryNano Firmware included. Older variant MisteryNano as back-up.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
v1.6.2
New feature(s)
- FreezerCRT support (e.g. Action Replay, Snippy ROM etc.)
- CRT Cartridge unload via OSD
Important
To make use of some Freezer CRT it might be required to use the standard 64 Kernal and C1541 ROM.
TP25k now needs the TFcard V2 PMOD !
Note
Bugfixes
- broken Multicard CRT ROM load fixed
- broken CRT load after power-up fixed
- Core to FPGA-companion Firmware compatibility improved
- broken PAL / NTSC mode switch fixed
- broken TP25k sd card operation with TFcard fixed
Note
Known Defects
- RGB LED dimmed
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
Both FPGA Companion and MisteryNano Firmware included. Older variant MisteryNano as back-up.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
Freezer CRT support
New feature(s)
- Freeze support (e.g. Action Replay CRT)
- CRT Cartridge unload via OSD
Important
To make use of Freezeer CRT the standard 64 Kernal and C1541 ROM have to be selected via OSD.
Note
Bugfixes
- broken Multicard CRT ROM load fixed
- broken CRT load after power-up fixed
- Core to FPGA-companion Firmware compatibility improved
Note
Known Defects
- Video mode PAL/NTSC switching causes OSD to be blocked. Recover by power-cycle until solution available.
- TP25k sd card operation
- G64 Disk usage
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
Both FPGA Companion and MisteryNano Firmware included. Older variant MisteryNano as back-up.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
2nd Trigger Button and Joystick Port Swap support, Multicard CRT fix
New feature(s)
- C64 RS232 serial interface on external hw pins (3.3 Volt tolerant)
- 2nd and 3rd Trigger Button support (C64GS support)
- Tang S1 USER Button and Keyboard PAGE UP as Joystick Port Swap HotKey apart from OSD selection
Important
DualShock 2 Key and Button handling on large scale changed. See README
Note
Bugfixes
- 2nd Trigger Button handling
- broken Multicard CRT ROM load fixed
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
This release also does not include the MCU firmware, anymore. Instead the FPGA Companion is now recommended.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
2nd Trigger Button and Joystick Port Swap support
New feature(s)
- C64 RS232 serial interface on external hw pins (3.3 Volt tolerant)
- 2nd and 3rd Trigger Button support (C64GS support)
- Tang S1 USER Button and Keyboard PAGE UP as Joystick Port Swap HotKey apart from OSD selection
Important
DualShock 2 Key and Button handling on large scale changed. See README
Note
Bugfixes
2nd Trigger Button handling
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
This release also does not include the MCU firmware, anymore. Instead the FPGA Companion is now recommended.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package
2nd Trigger Button and Joystick Port Swap support
New feature(s)
- C64 RS232 serial interface on external hw pins (3.3 Volt tolerant)
- 2nd and 3rd Trigger Button support (C64GS support)
- Tang S1 USER Button and Keyboard PAGE UP as Joystick Port Swap HotKey apart from OSD selection
Important
DualShock 2 Key and Button handling on large scale changed. See README
Note
Bugfixes
2nd Trigger Button handling
Warning
An updated firmware for the BL616 µC on the Sipeed M0S Dock has to be flashed in order to support the enhanced functions.
This release also does not include the MCU firmware, anymore. Instead the FPGA Companion is now recommended.
- loadable SID Filter curves in the release package
- updated XML OSD configuration in the release package