Skip to content

warpnet/BitM

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

4 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Installation and Usage

  1. perform default install of archlinux for ARM on a beaglebone here

  2. install dependencies with yaourt/pacman (or manually with the pkg files from AUR)

  3. change necessary config files (pointers in the stealth block below)

  4. make sure autosniff.py starts on startup

  5. connect two usb ethernet dongles and reboot the device (you need two because the builtin ethernet won't support promiscuous mode)

  6. perform physical ethernet cable beagle in the middle and wait for dhcp on the wireless AP

  7. It's probably good if you bind a SSH server to the wlan0 interface (make sure it doesn't burn the device to the switch).

Deps

python2 pycrypto python2-pcapy impacket libpcap bridge-utils ebtables iptables arptables hostapd

Stealth

[root@alarm ~]# cat /etc/sysctl.d/40-ipv6.conf 
# Disable IPv6

net.ipv6.conf.all.disable_ipv6 = 1
#net.ipv6.conf.interface0.disable_ipv6 = 1
#net.ipv6.conf.interfaceN.disable_ipv6 = 1

rm /etc/netctl/eth0

hostapd.conf

interface=wlan0
driver=nl80211
ssid=Nothingtoseehere
hw_mode=g
channel=11
wpa=2
wpa_passphrase=hackallthethings
wpa_key_mgmt=WPA-PSK
wpa_ptk_rekey=600
wpa_pairwise=TKIP
rsn_pairwise=CCMP

License

Just give me some credits if you build on this and keep it open source :)

About

Beagle(bone) in the Middle

Resources

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published