Errors: No board attached
If this error is shown it indicates that The Whitecat Create Agent failed to detect the board. In this case check the following:
-
Check if you have installed the prerequisites needed. Take special attention if your computer needs to install drivers for your board USB2SERIAL adapter.
-
Wait 10 seconds. When you plug an USB device, your computer's operating system can take a while for detect the device and start the drivers.
-
The board is really connected to your computer through an USB cord. Check connections on both sides.
-
The USB cord is in good condition.
-
Restart the Whitecat Create Agent. Search for the Whitecat's icon in the systray an click Restart option.
Ubuntu Mac OS Windows -
If your board mounts an FTDI USB2SERIAL adapter, restart the computer and try again. There are issues related to FTDI drivers.
The Whitecat IDE is free for you, but funds are required for make it possible. Feel free to donate as little or as much as you wish. Every donation is very much appreciated.
