Adding advanced section for active scan (#15)

* Adding advanced section for active scan

source/includes/advanced.md

@@ -8,10 +8,10 @@ The following image shows the advanced configurations tab of Spider in the deskt
 
 ![spider_advanced](../images/spider_advanced.png)
 
-Use the [setOptionMaxDepth](#spideractionsetoptionmaxdepth) to set the maximum depth the spider can crawl, where 0 refers to unlimited depth. 
-The [setOptionMaxChildren](#spideractionsetoptionmaxchildren) sets the maximum number of child nodes (per node) that can be crawled, 
+Use the [setOptionMaxDepth](#spideractionsetoptionmaxdepth) API to set the maximum depth the spider can crawl, where 0 refers to unlimited depth. 
+The [setOptionMaxChildren](#spideractionsetoptionmaxchildren) API sets the maximum number of child nodes (per node) that can be crawled, 
 where 0 means no limit. The [setOptionMaxDuration](#spideractionsetoptionmaxduration) API can be used to set the maximum duration the Spider will run.
-Use the [setOptionMaxParseSizeBytes](#spideractionsetoptionmaxparsesizebytes) to limit the amount of data parsed by the spider. 
+Use the [setOptionMaxParseSizeBytes](#spideractionsetoptionmaxparsesizebytes) API to limit the amount of data parsed by the spider. 
 This allows the spider to skip big responses/files. 
 
 View the [Spider section](#spider) in the API Catalogue for additional APIs.
@@ -26,7 +26,7 @@ Similar to the Spider API, the Ajax spider also provides APIs to set the [maximu
 
 ## Passive Scan Settings
 
-The scanning rules can be enabled/disabled using the [enableScanners](#pscanactionenablescanners) and [disableScanners]((#pscanactiondisablescanners)) API.
+The scanning rules can be enabled/disabled using the [enableScanners](#pscanactionenablescanners) and [disableScanners]((#pscanactiondisablescanners)) APIs.
 Also use the [setScanOnlyInScope](#pscanviewscanonlyinscope) API to limit the passive scanning to a scope. View
 the advanced section to learn how to configure a context or scope using ZAP APIs.
 
@@ -35,5 +35,59 @@ automatic tagging are provided by default. These can be changed, deleted or adde
 
 ## Active Scan Settings
 
-Content in progress!
+### General Options
 
+The general options for Active Scan can be configured using the options tab in the desktop UI shown below.
+
+![options](../images/ascan_advanced_options.png)
+
+Use the [setOptionMaxScanDurationInMins](#ascanactionsetoptionmaxscandurationinmins) API to limit the duration of scan and 
+[setOptionMaxRuleDurationInMins](#ascanactionsetoptionmaxruledurationinmins) API to limit the time of individual active scan rules.
+This can be used to prevent rules from running for an excessive amount of time.
+
+Use the [setOptionHostPerScan](#ascanactionsetoptionhostperscan) API to set the maximum number of hosts that will be scanned at the same time. 
+Furthermore, use the [setOptionThreadPerHost](#ascanactionsetoptionthreadperhost) API to set the number of threads the scanner will use per host. 
+Increasing both of these values will reduce the active scanning time but this may put extra strain on the server ZAP is running on.
+
+Use the [setOptionDelayInMs](#ascanactionsetoptiondelayinms) API to delay each request from ZAP in milliseconds. Setting this to a non zero value will increase 
+the time an active scan takes, but will put less of a strain on the target host. View the [Active Scan](#zap-api-ascan) section in 
+the API Catalogue for additional information regarding the APIs.
+
+### Input Vectors
+
+Input vectors refers to the elements that Active Scan will target. Specifying the exact elements to target will improve the
+scanning time and accuracy of the results. For example, for the following configuration the [optionTargetParamsInjectable](#ascanviewoptiontargetparamsinjectable) and 
+[optionTargetParamsEnabledRPC](#ascanviewoptiontargetparamsenabledrpc) will yield the results of 11 and 39. 
+The numbers can be deconstructed in the following manner:
+
+- 1+2+8 = 11 [Query String(1), Post Data(2), HTTP Headers(8)]
+- 1+2+4+32 = 39 [Multipart (1), XML (2), JSON (4), DWR (32)]
+
+![input_vectors_code](../images/ascan_advanced_input_vectors_code.png)
+
+Thus, to change the values of `Injectable targets` and `Input Vector Handlers` calculate the exact values and 
+use the [setoptiontargetparamsinjectable](#ascanactionsetoptiontargetparamsinjectable) and [setoptiontargetparamsenabledrpc](#ascanactionsetoptiontargetparamsenabledrpc) APIs accordingly.
+
+The `Add URL query parameter` option under the `Injectable Tragets` sets whether or not the active scanner should add a query param 
+to GET requests which do not have parameters to start with. This option can be enabled using the [setoptionaddqueryparam](#ascanactionsetoptionaddqueryparam) API.
+
+### Technology
+
+![technology](../images/ascan_advanced_tech.png)
+
+The Technology tab allows you to specify which types of technologies to scan. Un-selecting technologies that you know are 
+not present in the target application may speed up the scan, as rules which target that technology can skip those tests.
+For an example, if the target web application does not have a database then removing it will increase the performance of the Active Scan.
+
+Use the [includeContextTechnologies](#contextactionincludecontexttechnologies) and [excludeContextTechnologies](#contextactionexcludecontexttechnologies) 
+API endpoints to include and exclude the technology list from the context.
+
+### Policy
+
+A scan policy defines exactly which rules are run as part of an active scan. It also defines how these rules run influencing 
+how many requests are made and how likely potential issues are to be flagged. You can define as many scan policies as you 
+like and select the most appropriate one when you start the scan via the Active Scan. 
+
+![policy](../images/ascan_advanced_policy.png)
+
+The Policy tab shown in the above image allows you to override any of the settings specified in the selected scan policy.