drivers: video: common: add helpers to check video control range

This allows implementing the VIDEO_CTRL_GET_MIN/MAX/DEF controls on
drivers with minimum modification of the drivers.

A typical usage in a video_get_ctrl() implementation would be:

	ret = video_get_ctrl_range(cid, value, 0, 320, 9);
	if (ret <= 0) {
		return ret;
	}
	return sensor_read_u32(&cfg->i2c, EXPOSURE_REG, value, 2);

A typical usage in a video_set_ctrl() implementation would be:

	ret = video_check_range_u32(dev, cid, (uint32_t)value);
	if (ret < 0) {
		return ret;
	}
	return sensor_read_reg(&cfg->i2c, EXPOSURE_REG, value, 2);

Signed-off-by: Josuah Demangeon <[email protected]>

drivers/video/video_common.c

@@ -3,10 +3,11 @@
  *
  * SPDX-License-Identifier: Apache-2.0
  */
-
 #include <zephyr/kernel.h>
 #include <zephyr/drivers/video.h>
 
+#include "video_common.h"
+
 #if defined(CONFIG_VIDEO_BUFFER_USE_SHARED_MULTI_HEAP)
 #include <zephyr/multi_heap/shared_multi_heap.h>
 
@@ -83,3 +84,45 @@ void video_buffer_release(struct video_buffer *vbuf)
 		VIDEO_COMMON_FREE(block->data);
 	}
 }
+
+int video_get_range_u32(unsigned int cid, uint32_t *value, uint32_t min, uint32_t max, uint32_t def)
+{
+	switch (cid & VIDEO_CTRL_GET_MASK) {
+	case VIDEO_CTRL_GET_MIN:
+		*value = min;
+		return 0;
+	case VIDEO_CTRL_GET_MAX:
+		*value = max;
+		return 0;
+	case VIDEO_CTRL_GET_DEF:
+		*value = def;
+		return 0;
+	case VIDEO_CTRL_GET_CUR:
+		return 1;
+	default:
+		return -ENOTSUP;
+	}
+}
+
+int video_check_range_u32(const struct device *dev, unsigned int cid, uint32_t value)
+{
+	uint32_t min;
+	uint32_t max;
+	int ret;
+
+	ret = video_get_ctrl(dev, cid | VIDEO_CTRL_GET_MIN, &min);
+	if (ret < 0) {
+		return ret;
+	}
+
+	ret = video_get_ctrl(dev, cid | VIDEO_CTRL_GET_MAX, &max);
+	if (ret < 0) {
+		return ret;
+	}
+
+	if (value < min || value > max) {
+		return -ERANGE;
+	}
+
+	return 0;
+}

drivers/video/video_common.h

@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2024, tinyVision.ai Inc.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#ifndef ZEPHYR_INCLUDE_VIDEO_COMMON_H
+#define ZEPHYR_INCLUDE_VIDEO_COMMON_H
+
+/**
+ * @brief Provide the minimum/maximum/default 32-bit value depending on the CID.
+ *
+ * Video CIDs can contain sub-operations. This function facilitates
+ * implementation of video controls in the drivers by handling these
+ * the range-related CIDs.
+ *
+ * @param cid The Video Control ID which contains the operation.
+ * @param min The minimum value returned if the CID requested it.
+ * @param max The maximum value returned if the CID requested it.
+ * @param def The default value returned if the CID requested it.
+ *
+ * @return 0 if the operation was regarding a range CID and the value could
+ *         be set. In which case, there is nothing else to do than returning 0.
+ * @return 1 if the operation is not for the range, but the current value,
+ *         in which case it is the duty of the driver to query the current
+ *         value to the hardware
+ * @return A negative error code if an error occurred.
+ */
+int video_get_range_u32(unsigned int cid, uint32_t *u32, uint32_t min, uint32_t max, uint32_t def);
+
+/**
+ * @brief Check if the 32-bit value is within range for this CID.
+ *
+ * Before setting a video control, a driver might be interested in checking
+ * if it is within a valid range. This function facilitates it by reusing the
+ * video_get_ctrl() API using @c VIDEO_CTRL_GET_MIN and @c VIDEO_CTRL_GET_MAX
+ * to validate the input.
+ *
+ * @param dev The video device to query to learn about the min and max.
+ * @param cid The CID for which to check the range.
+ * @param u32 The 32-bit value that must be matched against the range.
+ */
+int video_check_range_u32(const struct device *dev, unsigned int cid, uint32_t u32);
+
+#endif /* ZEPHYR_INCLUDE_VIDEO_COMMON_H */