**Genetic Analysis of Wild and Cultivated Populations of Northern Wild Rice (Zizania palustris L.) Reveal New Insights into Gene Flow and Domestication**

This repository contains all of the scripts that were developed for the Northern Wild Rice genetic diversity project. The pre-print can be found here. This work builds upon the initial pilot GBS study by Shao et al. (2020).

Figures

Figure 1

This figure shows the location of collection sites on public, non-tribal land in Minnesota and Wisconsin. The original map (featuring only the Minnesota watersheds) used watershed boundaries provided by the Minnesota Department of Natural Resources. The updated watershed map featuring watersheds of both Minnesota and Wisconsin was provided by the Wisconsin Department of Natural Resources. Note: The shape files for both versions are available in our Google Drive.
I wrote the MN_watershed_map.py script in order to create this figure. Note that there are two shape files required for the script to work (MN_HUC4_WGS84_UTM15.shp & WI_HUC4_WGS84_UTM15.shp). These are the shape files and are specifically coded into the script. However, there are an additional two files (the shape index files) that are required for the script to work, but are not coded into the script (MN_HUC4_WGS84_UTM15.shx & WI_HUC4_WGS84_UTM15.shx). The .shx files store the index of the feature geometry.

Figure 2

Figure 2 code explanation

The PCA plots were made with R using input from plink. The R script itself is called from the bash script that I submitted to the SLURM scheduler. This allows me to recycle the same R script using different input files without needing to constantly edit & re-edit input our output file names. The bash script to make the PCA plot looks like:

#!/bin/bash -l
#SBATCH --nodes=1
#SBATCH --ntasks=32
#SBATCH --time=24:00:00
#SBATCH --mem=30g
#SBATCH --mail-type=ALL
#SBATCH [email protected]
#SBATCH -p amdsmall
#SBATCH --account=jkimball
#SBATCH -o plot_plink_pca_20NA_dp4.out
#SBATCH -e plot_plink_pca_20NA_dp4.err

cd /home/jkimball/haasx092/main_GBS/210306_samtools

module load R/3.6.0
Rscript plot_plink_pca.R  plink_20percent_NA_pca_dp4.eigenvec plink_20percent_NA_pca_dp4.eigenval 210306_main_gbs_20percent_NA_dp4.pdf 210306_main_gbs_20percent_NA_dp4.Rdata

In this case, the first argument (args[1] in R) is the eigenvector file, the second argument (args[2]) is the eigenvalue file, and the third argument (args[3] is the ouput PDF file which contains the plots themselves. In the R script (plot_plink_pca.R), the code looks like this (only the first instance is shown here. Look at the script itself if you want to see the other two instances):

fread(args[1]) -> x

Note: this line is required near the top of the R script for args[1], args[2], etc to work properly.

args <- commandArgs(trailingOnly = TRUE)

Figure 2a

Principal component analysis plot (PC1 vs PC2) for the complete set

Figure 2b

Principal component analysis plot (PC1 vs PC2) for the natural stands only

Figure 2c

Principal component analysis plot (PC1 vs PC2) for the cultivated material only

Figure 2d

Principal component analysis plot (PC1 vs PC2) for the temporal samples

Figure 3

Figure 3 code explanation

I wrote the script empulateStructurePlots.py to make these figures which emulate the ones automatically produced by STRUCTURE. My primary motivation was so that I could add labels to the bottom of each cluster in a reproducible way and not resort to using PowerPoint. A majority of the script consists of functions that I wrote to do the work. A brief overview is provided here.
Note: sys.argv[1] serves the same function in python as args[1] does in R. To use it, you should have two lines at the beginning of your script in addition to any other modules you want to use:

import os
import sys

The main function is called emulateStructure() which uses the number of columns in the CSV input file to tell the script how many K populations there are in the file. That information is used to give a K value to the makePlot() function. This is the function that actually makes the plots. It uses the function assignClusterMembership() to assign each cluster to the correct population (Natural Stand I, II, or III; Cultivated Material; or Zizania aquatica). The last few lines of the script are where this all comes together. The CSV file is 1) loaded into python; 2) sorted first by the most probable cluster and then by likelihood; and 3) the functions described above are executed.

df = pd.read_csv(sys.argv[1])
dfSorted = df.sort_values(by = ['Most_likely', 'Likelihood'], ascending = (True, False))
emulateStructure(df)

Figure 3a

STRUCTURE results for K = 2

Figure 3b

STRUCTURE results for K = 3

Figure 3c

STRUCTURE results for K = 4

Figure 3d

STRUCTURE results for K = 5

Finally, we also wanted to show how the plot looks when K=14. We selected 14 as the expected number of populations because we have 12 Natural Stand populations, 1 Zizania aquatica population, and 1 Cultivated Material population. Interestingly, we did not see each population get its own sub-population. Instead, there are ~6 major sub-populations. Some have higher degrees of admixture than others, especially Mud Hen Lake and Phantom Lake.

STRUCTURE results for K = 14

Figure 4

Figure 5

The combined sweep plot was generated using plot_combined_sweep_figure.R which imports data from each individual component's analysis so that they can be plotted in the same figure.

Tables

Table 1

Summary marker statistics for 5,955 Northern Wild Rice (NWR; Zizania palustris L.) bi-allelic single nucleotide polymorphism (SNP) markers generated via genotyping-by-sequencing (GBS).

Chr/Scaffold	Size (Mbp)	# of SNPs	% of total SNPs	# of SNPs in genic regions	% of SNPs in genic regions per chromosome
ZPchr0001	95.4	483	8.11%	74	15.32%
ZPchr0002	103.4	435	7.30%	56	12.87%
ZPchr0003	58.8	302	5.07%	37	12.25%
ZPchr0004	98.7	491	8.25%	24	4.89%
ZPchr0005	66.6	350	5.88%	41	11.71%
ZPchr0006	118.0	598	10.04%	126	21.07%
ZPchr0007	42.6	181	3.04%	66	36.46%
ZPchr0008	75.7	367	6.16%	38	10.35%
ZPchr0009	95.1	481	8.08%	25	5.20%
ZPchr0010	111.4	568	9.54%	75	13.20%
ZPchr0011	63.2	285	4.76%	41	14.39%
ZPchr0012	105.9	410	6.88%	86	20.98%
ZPchr0013	111.3	583	9.79%	66	11.32%
ZPchr0014	24.0	91	1.53%	28	30.77%
ZPchr0015	39.1	237	3.98%	12	5.06%
ZPchr0016	13.8	88	1.48%	6	6.82%
ZPchr0458	4.3	5	0.08%	3	60.00%

The number of genes that reside in genic regions are explained in the README file for the count_snps_in_genes directory, but I will also briefly explain the process/logic here. The script bedtools_find_snps_in_genes.sh uses the bedtools intersect function to find which of my SNPs (in a VCF file) are located in genes (via the GFF3 file). The results are then written to another VCF file (snps_in_genes.vcf). A quick one-liner can be used to count the number of SNPS in genes on each chromosome:

grep -v "^#" snps_in_genes.vcf | cut -f 1 | sort | uniq -c

Table 2

Analysis of Molecular Variance (AMOVA). The AMOVA was performed using the AMOVA.R R script launched by run_AMOVA.sh.

Grouping	Source of variation	df	MS	Sigma	%	Probability
Natural stands vs. Natural stands	Variations between individuals	12	7440.64	133.71	8.10	0.001
	Variations within individuals	567	1516.08	1516.08	91.90	0.001
	Total variation	579	1638.87	1649.78	100.00	0.001
Cultivated vs. Cultivated	Variations between individuals	20	1841.49	49.61	3.37	0.001
	Variations within individuals	166	1421.51	1421.51	96.63	0.001
	Total variation	186	1466.67	1471.11	100.00	0.001
Natural stands vs. Cultivated	Variations between individuals	1	20,955.05	68.42	4.09	0.001
	Variations within indiviuduals	765	1604.18	1604.17	95.91	0.001
	Total variation	766	1629.44	1672.60	100.00	0.001
STRUCTURE grouping K = 5	Variations between individuals	5	8508.68	57.96	3.53	0.001
	Variations within individuals	761	1584.24	1584.24	96.47	0.001
	Total variation	766	1629.44	1642.20	100.00	0.001

Table 3

Fixation index (F_ST) values derived using the weighted Weir and Cockerham method (Weir and Cockerham, 1984) based on 5,955 single nucleotide polymorphism (SNP) markers generated via genotyping-by-sequencing (GBS) for a diversity collection of Northern Wild Rice (NWR; Zizania palustris L.) consisting of a.) A Natural Stand collection; b.) A Cultivated collection; and c.) A comparison of Natural Stand and Cultivated collections. Sample sizes can be found in Table S1.

Natural Stands vs. Natural Stands

	Clearwater River	Dahler Lake	Decker Lake	Garfield Lake	Mud Hen Lake	Necktie River	Ottertail River	Phantom Lake	(Lake) Plantagenet	Shell Lake	Upper Rice Lake	Z. aquatica
Bass Lake	0.1040	0.0722	0.0487	0.0802	0.1529	0.0979	0.1201	0.0678	0.1080	0.1254	0.0434	0.1201
Clearwater River		0.1060	0.0934	0.0679	0.1406	0.0734	0.0670	0.0902	0.0410	0.0553	0.0493	0.1004
Dahler Lake			0.0782	0.0096	0.1519	0.1156	0.1233	0.0563	0.1132	0.1255	0.0483	0.1135
Decker Lake				0.0696	0.1490	0.0824	0.1076	0.0680	0.0931	0.1034	0.0388	0.1037
Garfield Lake					0.1515	0.0387	0.0791	0.0885	0.0589	0.0731	0.0459	0.1100
Mud Hen Lake						0.1580	0.1353	0.0861	0.1468	0.1578	0.1107	0.1291
Necktie River							0.0923	0.0996	0.0545	0.0838	0.0646	0.1221
Ottertail River								0.0952	0.0668	0.0494	0.0638	0.1072
Phantom Lake									0.0944	0.1077	0.0417	0.0734
(Lake) Plantagenet										0.0538	0.0570	0.1024
Shell Lake											0.0628	0.1175
Upper Rice Lake												0.0790

Cultived vs. Cultivated

	FY-C20	Itasca-C12	Itasca-C20	K2EF-C16	PM3E
Barron	0.0099	0.0058	0.0155	0.0273	0.0111
FY-C20		0.0063	0.0065	0.0233	0.0086
Itasca-C12			0.0078	0.0279	0.0121
Itasca-C20				0.0337	0.0190
K2EF-C16					0.0276

Cultivated vs. Natural Stands

	Barron	FY-C20	Itasca-C12	Itasca-C20	K2EF-C16	PM3E
Bass Lake	0.0362	0.0342	0.0342	0.0436	0.0440	0.0276
Clearwater River	0.0456	0.0464	0.0472	0.0595	0.0584	0.0431
Dahler Lake	0.0412	0.0418	0.0398	0.0504	0.0515	0.0369
Decker Lake	0.0412	0.0424	0.0422	0.0559	0.0466	0.0338
Garfield Lake	0.0542	0.0500	0.0540	0.0663	0.0571	0.0435
Mud Hen Lake	0.0709	0.0648	0.0694	0.0804	0.0684	0.0693
Necktie River	0.0600	0.0574	0.0589	0.0734	0.0667	0.0510
Ottertail River	0.0530	0.0505	0.0517	0.0586	0.0562	0.0485
Phantom Lake	0.0313	0.0267	0.0316	0.0360	0.0342	0.0262
(Lake) Plantagent	0.0495	0.0469	0.0492	0.0587	0.0532	0.0441
Shell Lake	0.0566	0.0561	0.0574	0.0719	0.0621	0.0504
Upper Rice Lake	0.0298	0.0305	0.0296	0.0423	0.0352	0.0240
Z. aquatica	0.0487	0.0479	0.0479	0.0572	0.0518	0.0445

Table S1

List of samples in our diversity collection of Northern Wild Rice (NWR; Zizania palustris L.) genotyped with 5,955 single nucleotide polymorphism (SNP) markers generated via genotyping-by-sequencing (GBS). HUC 8 watershed designations include Upper Mississippi River (UMR), Red River of the North (RRN), and St. Croix River (SCR) basins.

Sample ID	# of Samples	Collection Type	GPS coordinates	Watershed
Bass Lake	50	Natural Stand	47.28716 - 93.63132	UMR
Clearwater River	50	Natural Stand	47.51838 - 95.46291	RRN
Dahler Lake	50	Natural Stand	46.71888 - 93.97281	UMR
Decker Lake	50	Natural Stand	47.63515 - 94.40492	UMR
Garfield Lake	50	Natural Stand/Temporal	47.21361 - 94.74380	UMR
Mud Hen Lake	10	Natural Stand	45.77005 - 92.47173	SCR
Necktie River	50	Natural Stand	47.29363 - 94.74724	UMR
Ottertail River	50	Natural Stand	46.38005 - 95.86430	RRN
Phantom Lake	20	Natural Stand	45.81839 - 92.65074	SCR
(Lake) Plantagenet	50	Natural Stand	47.36758 - 94.91755	UMR
Shell Lake	50	Natural Stands/Temporal	46.94510 - 95.48486	UMR
Upper Rice Lake	50	Natural Stand	47.40030 - 95.28659	RRN
Zizania aquatica	50	Natural Stand	45.94473 - 94.24821	UMR
Garfield Lake 2010	50	Temporal	47.21361 - 94.74380	UMR
Shell Lake 2010	50	Temporal	46.94510 - 95.48486	UMR
14PD-C10	2	Cultivated	n/a	n/a
14S*PM3/PBM-C3	3	Cultivated	n/a	n/a
14S*PS-C3	5	Cultivated	n/a	n/a
Barron	25	Cultivated	n/a	n/a
Itasca-C12 (Dovetail)	15	Cultivated	n/a	n/a
Itasca-C12	31	Cultivated	n/a	n/a
Itasca-C20	11	Cultivated	n/a	n/a
FY-C20	29	Cultivated	n/a	n/a
GPB/K2B-C2	3	Cultivated	n/a	n/a
GPN-1.20	2	Cultivated	n/a	n/a
GPP-1.20	6	Cultivated	n/a	n/a
K2B-C16	20	Cultivated	n/a	n/a
K2EFBP-C1	5	Cultivated	n/a	n/a
KPVN-C4	4	Cultivated	n/a	n/a
KSVN-C4	5	Cultivated	n/a	n/a
PLaR-C20	4	Cultivated	n/a	n/a
PM3/3*PBM-C3	6	Cultivated	n/a	n/a
PM3/7*K2EF	3	Cultivated	n/a	n/a
PM3E	17	Cultivated	n/a	n/a
VE/214WS/4K2EF	2	Cultivated	n/a	n/a
VN/3*K2EF	4	Cultivated	n/a	n/a

Table S2

Geographic distance (km) matrix of US states of Minnesota and Wisconsin lakes and rivers where Northern Wild Rice (NWR; Z. palustris L.) leaf tissue samples were collected along with watershed designations for the Upper Mississippi River (UMR), Red River of the North (RRN), and St. Croix River (SCR).

Natural Population (Watershed)	Z. aquatica	Bass Lake	Clearwater River	Dahler Lake	Decker Lake	Garfield Lake	Mud Hen Lake	Necktie River	Ottertail Lake	Phantom Lake	(Lake) Plantagenet	Shell Lake	Upper Rice Lake
Z. aquatica (UMR)		156.7	198.2	88.7	188.6	146.3	139.1	154.9	133.7	124.6	166.4	146.3	180.4
Bass Lake (UMR)	156.7		140.4	68.4	69.9	84.5	190.8	84.3	197.8	179.9	97.5	145.5	125.5
Clearwater River (RRN)	198.2	140.4		143.7	80.5	64.0	300.2	59.4	130.3	286.3	44.4	63.8	18.7
Dahler Lake (UMR)	88.7	68.4	143.7		107.1	80.4	156.6	86.9	149.6	142.8	101.7	117.9	125.2
Decker Lake (UMR)	188.6	69.9	80.5	107.1		53.4	254.7	45.9	178.3	242.5	48.7	112.0	71.3
Garfield Lake (UMR)	146.3	84.5	64.0	80.4	53.4		236.9	8.9	126.1	223.2	21.6	63.6	45.9
Mud Hen Lake (SCR)	139.1	190.8	300.2	156.6	254.7	236.9		243.2	270.6	14.9	258.2	265.9	281.6
Necktie River (UMR)	154.9	84.3	59.4	86.9	45.9	8.9	243.2		132.6	229.6	15.3	68.0	42.4
Ottertail Lake (RRN)	133.7	197.8	130.3	149.6	178.3	126.1	270.6	132.6		255.8	131.4	69.3	121.8
Phantom Lake (SCR)	124.6	179.9	286.3	142.8	242.5	223.2	14.9	229.6	255.8		244.5	251.2	267.7
Lake Plantagenet (UMR)	166.4	97.5	44.4	101.7	48.7	21.6	258.2	15.3	131.4	244.5		63.7	28.1
Shell Lake (UMR)	146.3	145.5	63.8	117.9	112.0	63.6	265.9	68.0	69.3	251.2	63.7		52.8
Upper Rice Lake (RRN)	180.4	125.5	18.7	125.2	71.3	45.9	281.6	42.4	121.8	267.6	28.1	52.8

Table S3

Table S3 is too large to generate here using Markdown, so you can find it as an Excel file here.

Table S4

The Transition/Transversion ratios were generated using the script calculate_TsTv_vcftools.sh. Additional details can be found within the directory containing the script.

Statistic	ZPchr0001	ZPchr0002	ZPchr0003	ZPchr0004	ZPchr0005	ZPchr0006	ZPchr0007	ZPchr0008	ZPchr0009	ZPchr0010	ZPchr0011	ZPchr0012	ZPchr0013	ZPchr0014	ZPchr0015	ZPchr0016	ZPchr0458	Genome wide
Original scaffold name	Scaffold_13	Scaffold_93	Scaffold_3	Scaffold_18	Scaffold_1065	Scaffold_48	Scaffold_1063	Scaffold_1062	Scaffold_1	Scaffold_70	Scaffold_9	Scaffold_415	Scaffold_1064	Scaffold_693	Scaffold_7	Scaffold_51	Scaffold_453	NA
Scaffold size (bp)	95,470,783	103,377,072	58,865,324	98,769,966	66,616,710	118,006,097	42,614,780	75,690,682	95,187,837	111,429,323	63,217,741	105,879,435	111,260,184	24,058,870	39,125,943	13,817,767	4,333,358	1,227,721,872
Number of SNPs	483	435	302	491	350	598	181	367	481	568	285	410	583	91	237	88	5	5,955
SNP density (SNPs/Mb)	5.06	4.21	5.13	4.97	5.25	5.07	4.25	4.85	5.05	5.10	4.51	3.87	5.24	3.78	6.06	6.37	1.15	4.85
A/C	40	33	30	38	17	60	23	29	44	49	21	25	43	7	15	6	0	480
A/G	169	171	108	205	147	197	57	128	181	213	109	149	234	30	92	40	2	2232
A/T	22	16	12	18	17	26	10	13	16	25	18	21	23	3	9	1	1	251
C/G	19	19	17	19	13	34	17	16	17	31	8	28	28	4	10	4	0	284
C/T	197	174	109	178	131	233	58	152	196	210	114	154	212	39	98	31	1	2287
G/T	36	22	26	33	25	48	16	29	27	40	15	33	43	8	13	6	1	421
Transitions (Ts)	366	345	217	383	278	430	115	280	377	423	223	303	446	69	190	71	3	4519
Transversions (Tv)	117	90	85	108	72	168	66	87	104	145	62	107	137	22	47	17	2	1436
TsTv ratio	3.13	3.83	2.55	3.55	3.86	2.56	1.74	3.22	3.63	2.92	3.60	2.83	3.26	3.14	4.04	4.18	1.50	3.15

Table S5

Polymorphic Information Content (PIC) values for 5,955 single nucleotide polymorphism (SNP) markers generated via genotyping-by-sequencing (GBS) using our diversity collection of Northern Wild Rice (NWR; Zizania palustris L.)

	Mean	Median	Minimum	Maximum	Standard Deviation
Barron	0.1649	0.1557	0.0216	0.3125	0.1043
FY-C20	0.1639	0.1557	0.0199	0.3125	0.1052
Itasca-C12	0.1531	0.1379	0.0166	0.3125	0.1064
Itasca-C20	0.1840	0.1829	0.0449	0.3125	0.0981
K2EF-C16	0.1803	0.1829	0.0261	0.3125	0.1053
PM3E	0.1774	0.1829	0.0292	0.3125	0.1041

Bass Lake	0.1484	0.1287	0.0010	0.3125	0.1093
Clearwater River	0.1523	0.1369	0.0113	0.3125	0.1084
Dahler Lake	0.1541	0.1373	0.0142	0.3125	0.1079
Decker Lake	0.1540	0.1395	0.0091	0.3125	0.1111
Garfield Lake	0.1471	0.1263	0.0091	0.3125	0.1090
Mud Hen Lake	0.1924	0.1999	0.0493	0.3125	0.0982
Necktie River	0.1500	0.1260	0.0113	0.3125	0.1108
Ottertail River	0.1528	0.1353	0.0010	0.3125	0.1104
Phantom Lake	0.1637	0.1702	0.0248	0.3125	0.1049
(Lake) Plantagenet	0.1534	0.1353	0.0010	0.3125	0.1105
Shell Lake	0.1477	0.1221	0.0010	0.3125	0.1116
Upper Rice Lake	0.1420	0.1141	0.0010	0.3125	0.1088
Zizania aquatica	0.1496	0.1313	0.0010	0.3125	0.1107

We initially calculated Polymorphism Information Content (PIC) values in Excel; however, I don't particularly like using Excel for computational work. I made that exception (initially) because I was having a hard time finding appropriate tools to do the analysis. So, I chose to use Excel for expediency. After some time, I discovered the snpReady R package which will actually do the PIC calculations! So, I switched to that method using the NeiD_and_PIC_with_snpReady.R script!

Table S6

D-statistics (ABBA-BABA) results for a diversity collection of Northern Wild Rice (NWR; Zizania palustris L.).

P1	P2	P3	ABBA^a	BABA^a	BBAA^a	D	p-value	F4-ratio	Z^b
Cultivated	Natural Stands I	Natural Stands II	348.181	336.828	367.406	0.017	0.098	0.193	1.655

^a Number of ABBA and BABA sites. Z. aquatica was used as an outgroup for all comparisons.
^b Z: Z-score

D-statistics (ABBA-BABA) was performed using the the R package admixTools. The admixtools_ABBA-BABA.R script used to launch the analysis is launched by the run_admixtools.sh script.

Table S7

Table S7 is too large to generate here using Markdown, so you can find it as an Excel file here.

Supplementary Figures

Figure S1

. A county-level map of the United States of Minnesota and western Wisconsin showing where leaf tissue samples of our Northern Wild Rice (NWR; Zizania palustris L.) diversity collection were collected and highlighting counties with significant production of cultivated NWR. Colors correspond to those featured in the principal component analysis (PCA) plots (Figure 2a-b).

Figure S2

Unweighted pair group method with arithmetic averaging (UPGMA) tree for the combined Natural Stands and Cultivated Material panel. The first step in the pipeline to create the UPGMA trees is run_bcftools_reheader.sh which makes a new VCF file with shortened sample names (e.g., only Sample_0001 instead of Sample_0001/Sample_0001_sorted.bam). The next step is to use filter_with_vcftools_by_ind_natural_stands_and_breed_lines.sh in order to filter the complete VCF file (with all individuals) so that it only contains the samples that you want to include in the tree (specified by the .txt file (which also needs to contain the same individuals as the .csv file used by the R script otherwise you will get an error. The R script make_tree_natural_stands_and_breeding_lines.R which is launched by run_make_tree_natural_stands_and_breeding_lines.sh contains the main code for making the figure (getting data into the right format, bootstrapping values, tip label color, etc).

The default style for the UPGMA tree is phyogram according to the ape documentation. This is what we originally used, but I never liked how it appeared and I think the fan version is easier to interpret. It also makes the figure more compact, which I think helps in viewing the entire tree at once. The radial style is also circular, but I don't think it looks as clean as the fan style.

Another new aspect of this tree vs. the original version is that the branches (or edges using the ape terminology) are colored to match the tip colors. This was acheived using the argument edge.color = edge_colors in the plot.phylo() function from the ape R package. Together, the two changes described here are accomplished by executing this line of code:

plot.phylo(tree, cex = 1.5, font = 2, adj = 0, type = "fan", edge.color = edge_colors, tip.color =  hexColorList[pop(gen_light_x)])

Note: This is very similar to the original code. The only difference is that in the original, the arguments type = "fan" and edge.color = edge_colors were not included so the function used their default values ("phylogram" for type and "black" for edge.color.)

To add colors to the edges (branches), you should first initialize the "edge_colors" object. I did that using the following code:

edge_colors <- rep("grey", Nedge(tree))

The rep() function will create an object that I've decided to call "edge_colors" with as many occurrences of the word "grey" as there are edges (branches) in the tree object. The default is "black" as stated above, but in our combined PCA plot, we chose to make all of the cultivated material colored grey so that the natural stands would stick out. The approach we are using here (in combination with the next steps) will result in all of the cultivated material being colored grey without having to manually define each and every cultivated variety since there are a bunch of them with complex names (since some of the names offer insight into crosses that went into particular lines and aren't as simple as "Barron", "FY-C20", etc.).

I added lake/river-specific colors to the "edge_colors" object using the which.edge() function from the ape R packege. You can find documentation for that here. The function returns a vector containing numbers matching the edges (branches) that meet a specific condition. Please see the line below for example code:

BassLake <- which.edge(tree, "Bass Lake")

The script repeats this function for each individual lake or river.

Colors are then added to the appropriate positions inside the "edge_colors" object using the following code:

edge_colors[BassLake] <- "red"

You will then repeat this step for each of the individual lakes/rivers like you did with the which.edge() function to insert the correct color that matches the collection map and PCA plots.

The resulting figure (from the plot.phylo() function above) will look like this:

Figure S3

The Evanno method (Evanno 2005) was carried out by uploading our results from STRUCTURE (Pritchard et al. 2000) into the program STRUCTURE harvester(Earl and vonHoldt, 2012). DeltaK is minimized at K=5, suggesting that there are 5 subpopulations present in our diversity panel.There's no code to show for this figure because we simply uploaded data from STRUCTURE and uploaded it to this website.

Figure S4

Mantel test results. The plot shows the correlation between geographic distance (x-axis) and genetic distance (y-axis). Geographic distance (in kilometers) and genetic distance (as Prevosti's distance, also used in our UPGMA trees) were used as input. Units shown are not the same as the input units.

The Mantel test was conducted in the R statistical environment using the mantel_test.R script. It contains the code for both the dot plot with regression line as well as the histogram of permutation testing. Note: Itasca-C12 was included to be representative of the Cultivated Material with the NCROC as its geographic coordinate to serve as a reference (since it is also the reference genome that was used for short read alignment and SNP calling) despite concerns that it is not a Natural Stand and may not be appropriate to incude (since it is subject to artificial selection and artificial planting and therefore not subject to natural evolutionary forces).

Figure S5

Results of permutation testing. The histogram shows the frequency of simulated correlation tests resulting from permutation tests. The black diamond with a vertical line beneath it shows the actual correlation value from our Mantel (Figure S4) test using real data. This signifies that our results are unlikely to have been reached by chance.

This histogram was created using the mantel_test.R script.

Figure S6

Linkage disequilibrium decay for all chromosomes and scaffolds of Northern Wild Rice (NWR; Zizania palustris L.) based on 5,955 single nucleotide polymorphism (SNP) markers generated via genotyping-by-sequencing (GBS).

This plot was created using the calculate_LD_decay.R script. This analysis used imputed data because the LD.decay() function from the sommer R package requires no missing data. The first round of linkage disequilibrium analysis was done by Reneth in TASSEL and these results compare favorably with her results. The script that I used to recreate her TASSEL plots (in R) can be found here. Note: They all have "_50slidingwindow.csv" as part of the filename.

Figure S7

Site spectrum frequency histograms for our a.) Natural Stand collection and b.) Cultivated collection of Northern Wild Rice (NWR; Zizania palustris L.) based on 5,955 single nucleotide polymorphism (SNP) markers generated via genotyping-by-sequencing (GBS).

The figure was made using the plot_site_spectrum_frequency.R script. Calculations were done in Excel and can be found in the file snp_matrices_with_SFS_calcs.xlsx. I tried to link to it here, but the file size is too big (almost 70 Mb) so it is in our Google Drive and in our DRUM submissin. Briefly, the SNP matrix was arranged so that columns represent individuals (samples) and rows represent SNPs. Six colummns were added to the end of the SNP matrix (0=reference allele; 1=heterozygous; 2=alternate allele; NA=missing; Total=total number of individuals; Total_no_NA=total number of individuals with data). Two additional columns were added: ref_allele_freq and alt_allele_freq for reference allele frequency and alternate allele frequency, respectively. The reference allele frequency was calculated by adding $2\times ref count$ to the heterozygous count and dividing by twice the total number of non-missing calls. Similarly, the alternate allele frequency was calculated by adding $2\times alt count$ to the heterozygous count and dividing by twice the total number of non-missing calls. Note: we could also have done this by subtracting the ref allele count from 1, but this got us the same result. Also note that the reason we used twice the number of reference, alternate, and total counts is because NWR is a diploid organism so each call represents two alleles and we are calculating allele frequency. We could also have reached the same result by keeping the reference, alternate, and total counts the same and only adding half of the heterozygous counts to each calculation. We then counted the number of occurrences of each allele frequency in bins of 2 percent (e.g., 0.00-0.019, 0.02-0.039, 0.04-0.059, etc). These numbers (calculated separately for Natural Stands and Cultivated Material) were hard-coded into the R script.

Other scripts

Exploratory work

There are some other file preseent in this repository that didn't make it into the manuscript, but are here nonetheless. Rather than permanently remove them, the purpose of this section is to briefly explain what they were used for.

plotting_dv-dp_ratios.R was used to look at the dv/dp (depth of the variant/total depth of a SNP) to confir that NWR is in fact a diploid. The ploidy was briefly called into question because the size of the genome assembly came in at 1.29 Gb, which is much larger than initially expected. The output of this script confirmed that NWR is indeed a diploid. Later, we also did flow cytometry and the result of that experiment showed that the true size of the NWR genome is closer to 1.8 Gb.
plot_effect_of_hwe_on_Fst.R was used to explore how altering the Hardy-Weinberg Equilibrium filtering parameter in VCFtools affected the Fst values. This was done because the Fst values were considerably lower than expected based on previous literature.
plot_effect_of_mac_on_Fst.R was used to explore how altering the minor allele frequency (or count) parameter in VCFtools affected the Fst values. While altering this parameter had the greatest effect on Fst values, changing them did not greatly affect the overall Fst results.

Name		Name	Last commit message	Last commit date
Latest commit History 990 Commits
SAMtools-BCFtools		SAMtools-BCFtools
Sequencing_report_data		Sequencing_report_data
collection_map		collection_map
count_snps_in_genes		count_snps_in_genes
exploratory_work		exploratory_work
flagstat_files		flagstat_files
helper_files		helper_files
identity-by-state		identity-by-state
images		images
imputation		imputation
other_files		other_files
other_scripts		other_scripts
plink_files		plink_files
pop_gen_analyses		pop_gen_analyses
supplemental_data		supplemental_data
vcftools_scripts_incl_nonbiallelic		vcftools_scripts_incl_nonbiallelic
README.md		README.md
merge_fastq_read_counts.py		merge_fastq_read_counts.py

MatthewHaas/genetic_diversity

Folders and files

Latest commit

History

Repository files navigation

Genetic Analysis of Wild and Cultivated Populations of Northern Wild Rice (Zizania palustris L.) Reveal New Insights into Gene Flow and Domestication

Directory

Figures

Tables

Supplemental Figures

Figures

Figure 1

Figure 2

Figure 2 code explanation

Figure 2a

Figure 2b

Figure 2c

Figure 2d

Figure 3

Figure 3 code explanation

Figure 3a

Figure 3b

Figure 3c

Figure 3d

Figure 4

Figure 5

Tables

Table 1

Table 2

Table 3

Table S1

Table S2

Table S3

Table S4

Table S5

Table S6

Table S7

Supplementary Figures

Figure S1

Figure S2

Figure S3

Figure S4

Figure S5

Figure S6

Figure S7

Other scripts

Exploratory work

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

**Genetic Analysis of Wild and Cultivated Populations of Northern Wild Rice (Zizania palustris L.) Reveal New Insights into Gene Flow and Domestication**

Packages