User Guide: FrSKY Sensor Hub

FrSKY Sensor Hub enables your board to send UAVO data to a FrSKY receiver. This a replacement of real FrSKY Sensor Hub hardware.

To get the module working follow these steps:

1. Create a suitable connection cable with TTL<=>RS232 converter
2. Connect RS232 side to the FrSKY receiver.
3. Connect TTL side to a free uart
4. Map this uart to the FrSKY sensor hub module in hardware settings
5. Enable module in module settings
6. Restart your flight control

The module will send this data:

• altitude
• temperatures (from baro and from accelerometer)
• x,y and z acceleration
• current, voltage and cell voltages (if battery module is enabled)
• gps data (if gps module has a fix)