G2core on DUE External Interfaces

Driving Steppers with G2core running on the Arduino DUE

THIS PAGE IS UNDER CONSTRUCTION Send Questions to [email protected]

Overview

The Arduino DUE development platform is ideal for getting started with G2core and for prototyping multi-axis projects. G2core builds for CONFIG=gShield will build firmware and set up pinouts for the DUE supporting 6 Axes, X,Y,Z,A,B and C plus outputs for SpinPWM , all 6 Axis limit switches and a few other I/Os.

Here are some useful references

• https://github.com/synthetos/g2/wiki/Arduino-DUE-Pinout-for-g2core
• https://github.com/grbl/grbl/wiki/Connecting-Grbl

A Quick 3 axis solution

Use a gShield on the DUE with 3 on-board 8818 driver devices for 3 Axis operation

• A good reference: https://github.com/synthetos/grblShield/wiki/Using-grblShield

External interfaces for full 6 axis operation and more powerful stepper drivers

The diagram below is hosted at https://github.com/cmcgrath5035/G2core-DUE-External-Interfaces. Included are suggested interface devices (proto board, etc) to level shift and buffer the DUE outputs. Consider this a template, there are numerous similar devices that could be used, the MOSFETS are rather inexpensive and easy to work with

A downloadable PDF is also available: https://github.com/cmcgrath5035/G2core-DUE-External-Interfaces/blob/master/G2core%20DUE%20External%20Interfaces.pdf

Here is a list of external drivers reported to work with the DUE and G2core. These are just examples, not recommendations Feel free to edit this page with your experienced results

• DM542 (DM542T: https://www.omc-stepperonline.com/stepper-motor-driver/digital-stepper-driver-10-42a-20-50vdc-for-nema-17-23-24-stepper-motor-dm542t.html)
• w.i.p.