T_Rhino_Geometry_BrepEdge

BrepEdge Class

Represents a single edge curve in a Brep object.

Inheritance Hierarchy

System.Object
  Rhino.Runtime.CommonObject
    Rhino.Geometry.GeometryBase
      Rhino.Geometry.Curve
        Rhino.Geometry.CurveProxy
          Rhino.Geometry.BrepEdge
Namespace: Rhino.Geometry
Assembly: RhinoCommon (in RhinoCommon.dll) Version: Rhino 6.0

Syntax

C#

public class BrepEdge : CurveProxy

VB

Public Class BrepEdge
	Inherits CurveProxy

The BrepEdge type exposes the following members.

Properties

 

	Name	Description
	Brep	Gets the Brep that owns this edge.
	Degree	Gets the maximum algebraic degree of any span or a good estimate if curve spans are not algebraic. (Inherited from Curve.)
	Dimension	Gets the dimension of the object. The dimension is typically three. For parameter space trimming curves the dimension is two. In rare cases the dimension can be one or greater than three. (Inherited from Curve.)
	Domain	Gets or sets the domain of the curve. (Inherited from Curve.)
	EdgeCurve	Get the brep.Curves3D[] 3d curve geometry used by this edge or null.
	EdgeCurveIndex	Get the brep.Curves3D[] index of the 3d curve geometry used by this edge or -1.
	EdgeIndex	Gets the index of this edge in the Brep.Edges collection.
	EndVertex	BrepVertex at end of edge
	HasBrepForm	Returns true if the Brep.TryConvertBrep function will be successful for this object (Inherited from GeometryBase.)
	HasUserData	Gets true if this class has any custom information attached to it through UserData. (Inherited from CommonObject.)
	IsClosed	Gets a value indicating whether or not this curve is a closed curve. (Inherited from Curve.)
	IsDeformable	true if object can be accurately modified with "squishy" transformations like projections, shears, and non-uniform scaling. (Inherited from GeometryBase.)
	IsDocumentControlled	If true this object may not be modified. Any properties or functions that attempt to modify this object when it is set to "IsReadOnly" will throw a NotSupportedException. (Inherited from GeometryBase.)
	IsPeriodic	Gets a value indicating whether or not this curve is considered to be Periodic. (Inherited from Curve.)
	IsValid	Tests an object to see if it is valid. (Inherited from CommonObject.)
	ObjectType	Useful for switch statements that need to differentiate between basic object types like points, curves, surfaces, and so on. (Inherited from GeometryBase.)
	PointAtEnd	Evaluates point at the end of the curve. (Inherited from Curve.)
	PointAtStart	Evaluates point at the start of the curve. (Inherited from Curve.)
	ProxyCurveIsReversed	True if "this" is a curve is reversed from the "real" curve geometry (Inherited from CurveProxy.)
	SpanCount	Gets the number of non-empty smooth (c-infinity) spans in the curve. (Inherited from Curve.)
	StartVertex	BrepVertex at start of edge
	TangentAtEnd	Evaluate unit tangent vector at the end of the curve. (Inherited from Curve.)
	TangentAtStart	Evaluates the unit tangent vector at the start of the curve. (Inherited from Curve.)
	Tolerance	Gets or sets the accuracy of the edge curve (>=0.0 or RhinoMath.UnsetValue) A value of UnsetValue indicates that the tolerance should be computed. The maximum distance from the edge's 3d curve to any surface of a face that has this edge as a portion of its boundary must be <= this tolerance.
	TrimCount	Gets the number of trim-curves that use this edge.
	UserData	List of custom information that is attached to this class. (Inherited from CommonObject.)
	UserDictionary	Dictionary of custom information attached to this class. The dictionary is actually user data provided as an easy to use sharable set of information. (Inherited from CommonObject.)
	UserStringCount	Gets the amount of user strings. (Inherited from GeometryBase.)
	Valence	Gets the topological valency of this edge. The topological valency is defined by how many adjacent faces share this edge.

  Back to Top

Methods

 

	Name	Description
	AdjacentFaces	Gets the indices of all the BrepFaces that use this edge.
	ChangeClosedCurveSeam	If this curve is closed, then modify it so that the start/end point is at curve parameter t. (Inherited from Curve.)
	ChangeDimension	Changes the dimension of a curve. (Inherited from Curve.)
	ClosedCurveOrientation()	Determines the orientation (counterclockwise or clockwise) of a closed, planar curve in the world xy plane. Only works with simple (no self intersections) closed, planar curves. (Inherited from Curve.)
	ClosedCurveOrientation(Plane)	Determines the orientation (counterclockwise or clockwise) of a closed, planar curve in a given plane. Only works with simple (no self intersections) closed, planar curves. (Inherited from Curve.)
	ClosedCurveOrientation(Transform)	Determines the orientation (counterclockwise or clockwise) of a closed, planar curve. Only works with simple (no self intersections) closed, planar curves. (Inherited from Curve.)
	ClosedCurveOrientation(Vector3d)	Determines the orientation (counterclockwise or clockwise) of a closed, planar curve in a given plane. Only works with simple (no self intersections) closed, planar curves. (Inherited from Curve.)
	ClosestPoint(Point3d, Double)	Finds parameter of the point on a curve that is closest to testPoint. If the maximumDistance parameter is > 0, then only points whose distance to the given point is <= maximumDistance will be returned. Using a positive value of maximumDistance can substantially speed up the search. (Inherited from Curve.)
	ClosestPoint(Point3d, Double, Double)	Finds the parameter of the point on a curve that is closest to testPoint. If the maximumDistance parameter is > 0, then only points whose distance to the given point is <= maximumDistance will be returned. Using a positive value of maximumDistance can substantially speed up the search. (Inherited from Curve.)
	ClosestPoints(Curve, Point3d, Point3d)	Gets closest points between this and another curves. (Inherited from Curve.)
	ClosestPoints(IEnumerable(GeometryBase), Point3d, Point3d, Int32)	Finds the object (and the closest point in that object) that is closest to this curve. Breps, surfaces, curves and point clouds are examples of objects that can be passed to this function. (Inherited from Curve.)
	ClosestPoints(IEnumerable(GeometryBase), Point3d, Point3d, Int32, Double)	Finds the object (and the closest point in that object) that is closest to this curve. Breps, surfaces, curves and point clouds are examples of objects that can be passed to this function. (Inherited from Curve.)
	ComponentIndex	If this piece of geometry is a component in something larger, like a BrepEdge in a Brep, then this function returns the component index. (Inherited from GeometryBase.)
	ConstructConstObject	Assigns a parent object and a subobject index to this. (Inherited from CommonObject.)
	Contains(Point3d)	Computes the relationship between a point and a closed curve region. This curve must be closed or the return value will be Unset. Both curve and point are projected to the World XY plane. (Inherited from Curve.)
	Contains(Point3d, Plane)	Computes the relationship between a point and a closed curve region. This curve must be closed or the return value will be Unset. (Inherited from Curve.)
	Contains(Point3d, Plane, Double)	Computes the relationship between a point and a closed curve region. This curve must be closed or the return value will be Unset. (Inherited from Curve.)
	CurvatureAt	Evaluate the curvature vector at a curve parameter. (Inherited from Curve.)
	DerivativeAt(Double, Int32)	Evaluate the derivatives at the specified curve parameter. (Inherited from Curve.)
	DerivativeAt(Double, Int32, CurveEvaluationSide)	Evaluate the derivatives at the specified curve parameter. (Inherited from Curve.)
	Dispose()	Actively reclaims unmanaged resources that this instance uses. (Inherited from CommonObject.)
	Dispose(Boolean)	For derived class implementers. This method is called with argument true when class user calls Dispose(), while with argument false when the Garbage Collector invokes the finalizer, or Finalize() method. You must reclaim all used unmanaged resources in both cases, and can use this chance to call Dispose on disposable fields if the argument is true. Also, you must call the base virtual method within your overriding method. (Inherited from Curve.)
	DivideAsContour	Divides this curve at fixed steps along a defined contour line. (Inherited from Curve.)
	DivideByCount(Int32, Boolean)	Divide the curve into a number of equal-length segments. (Inherited from Curve.)
	DivideByCount(Int32, Boolean, Point3d[])	Divide the curve into a number of equal-length segments. (Inherited from Curve.)
	DivideByLength(Double, Boolean)	Divide the curve into specific length segments. (Inherited from Curve.)
	DivideByLength(Double, Boolean, Point3d[])	Divide the curve into specific length segments. (Inherited from Curve.)
	DivideEquidistant	Calculates 3d points on a curve where the linear distance between the points is equal. (Inherited from Curve.)
	Duplicate	Constructs an exact duplicate of this Curve. (Inherited from Curve.)
	DuplicateCurve	Constructs an exact duplicate of this curve. (Inherited from Curve.)
	DuplicateSegments	Polylines will be exploded into line segments. ExplodeCurves will return the curves in topological order. (Inherited from Curve.)
	DuplicateShallow	Constructs a light copy of this object. By "light", it is meant that the same underlying data is used until something is done to attempt to change it. For example, you could have a shallow copy of a very heavy mesh object and the same underlying data will be used when doing things like inspecting the number of faces on the mesh. If you modify the location of one of the mesh vertices, the shallow copy will create a full duplicate of the underlying mesh data and the shallow copy will become a deep copy. (Inherited from GeometryBase.)
	EnsurePrivateCopy	If you want to keep a copy of this class around by holding onto it in a variable after a command completes, call EnsurePrivateCopy to make sure that this class is not tied to the document. You can call this function as many times as you want. (Inherited from CommonObject.)
	Equals	Determines whether the specified object is equal to the current object. (Inherited from Object.)
	Extend(Interval)	Where possible, analytically extends curve to include the given domain. This will not work on closed curves. The original curve will be identical to the restriction of the resulting curve to the original curve domain. (Inherited from Curve.)
	Extend(Double, Double)	Where possible, analytically extends curve to include the given domain. This will not work on closed curves. The original curve will be identical to the restriction of the resulting curve to the original curve domain. (Inherited from Curve.)
	Extend(CurveEnd, CurveExtensionStyle, Point3d)	Extends a curve to a point. (Inherited from Curve.)
	Extend(CurveEnd, CurveExtensionStyle, IEnumerable(GeometryBase))	Extends a curve until it intersects a collection of objects. (Inherited from Curve.)
	Extend(CurveEnd, Double, CurveExtensionStyle)	Extends a curve by a specific length. (Inherited from Curve.)
	ExtendByArc	Extends a curve by an Arc until it intersects a collection of objects. (Inherited from Curve.)
	ExtendByLine	Extends a curve by a line until it intersects a collection of objects. (Inherited from Curve.)
	ExtendOnSurface(CurveEnd, BrepFace)	Extends a curve on a surface. (Inherited from Curve.)
	ExtendOnSurface(CurveEnd, Surface)	Extends a curve on a surface. (Inherited from Curve.)
	ExtremeParameters	Returns the parameter values of all local extrema. Parameter values are in increasing order so consecutive extrema define an interval on which each component of the curve is monotone. Note, non-periodic curves always return the end points. (Inherited from Curve.)
	Fair	Fairs a curve object. Fair works best on degree 3 (cubic) curves. Attempts to remove large curvature variations while limiting the geometry changes to be no more than the specified tolerance. (Inherited from Curve.)
	Finalize()	Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.)
	Finalize()	Passively reclaims unmanaged resources when the class user did not explicitly call Dispose(). (Inherited from CommonObject.)
	Fit	Fits a new curve through an existing curve. (Inherited from Curve.)
	FrameAt	Returns a 3d frame at a parameter. (Inherited from Curve.)
	GetBoundingBox(Boolean)	Boundingbox solver. Gets the world axis aligned boundingbox for the geometry. (Inherited from GeometryBase.)
	GetBoundingBox(Plane)	Aligned Boundingbox solver. Gets the plane aligned boundingbox. (Inherited from GeometryBase.)
	GetBoundingBox(Transform)	Aligned Boundingbox solver. Gets the world axis aligned boundingbox for the transformed geometry. (Inherited from GeometryBase.)
	GetBoundingBox(Plane, Box)	Aligned Boundingbox solver. Gets the plane aligned boundingbox. (Inherited from GeometryBase.)
	GetConicSectionType()	Returns the type of conic section based on the curve's shape. (Inherited from Curve.)
	GetConicSectionType(Point3d, Point3d, Point3d)	Returns the type of conic section based on the curve's shape. (Inherited from Curve.)
	GetCurveParameterFromNurbsFormParameter	Convert a NURBS curve parameter to a curve parameter. (Inherited from Curve.)
	GetEdgeParameter	Get corresponding edge parameter for given trim at given trim parameter.
	GetHashCode	Serves as the default hash function. (Inherited from Object.)
	GetLength()	Gets the length of the curve with a fractional tolerance of 1.0e-8. (Inherited from Curve.)
	GetLength(Double)	Get the length of the curve. (Inherited from Curve.)
	GetLength(Interval)	Get the length of a sub-section of the curve with a fractional tolerance of 1e-8. (Inherited from Curve.)
	GetLength(Double, Interval)	Get the length of a sub-section of the curve. (Inherited from Curve.)
	GetNextDiscontinuity	Searches for a derivative, tangent, or curvature discontinuity. (Inherited from Curve.)
	GetNurbsFormParameterFromCurveParameter	Convert a curve parameter to a NURBS curve parameter. (Inherited from Curve.)
	GetObjectData	Populates a System.Runtime.Serialization.SerializationInfo with the data needed to serialize the target object. (Inherited from CommonObject.)
	GetPerpendicularFrames	Gets a collection of perpendicular frames along the curve. Perpendicular frames are also known as 'Zero-twisting frames' and they minimize rotation from one frame to the next. (Inherited from Curve.)
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	GetUserString	Gets user string from this geometry. (Inherited from GeometryBase.)
	GetUserStrings	Gets a copy of all (user key string, user value string) pairs attached to this geometry. (Inherited from GeometryBase.)
	HasNurbsForm	Does a NURBS curve representation of this curve exist? (Inherited from Curve.)
	IsArc()	Test a curve to see if it can be represented by an arc or circle within RhinoMath.ZeroTolerance. (Inherited from Curve.)
	IsArc(Double)	Test a curve to see if it can be represented by an arc or circle within the given tolerance. (Inherited from Curve.)
	IsCircle()	Test a curve to see if it can be represented by a circle within RhinoMath.ZeroTolerance. (Inherited from Curve.)
	IsCircle(Double)	Test a curve to see if it can be represented by a circle within the given tolerance. (Inherited from Curve.)
	IsClosable(Double)	Decide if it makes sense to close off this curve by moving the endpoint to the start based on start-end gap size and length of curve as approximated by chord defined by 6 points. (Inherited from Curve.)
	IsClosable(Double, Double, Double)	Decide if it makes sense to close off this curve by moving the endpoint to the start based on start-end gap size and length of curve as approximated by chord defined by 6 points. (Inherited from Curve.)
	IsContinuous	Test continuity at a curve parameter value. (Inherited from Curve.)
	IsEllipse()	Test a curve to see if it can be represented by an ellipse within RhinoMath.ZeroTolerance. (Inherited from Curve.)
	IsEllipse(Double)	Test a curve to see if it can be represented by an ellipse within a given tolerance. (Inherited from Curve.)
	IsInPlane(Plane)	Test a curve to see if it lies in a specific plane. (Inherited from Curve.)
	IsInPlane(Plane, Double)	Test a curve to see if it lies in a specific plane. (Inherited from Curve.)
	IsLinear()	Test a curve to see if it is linear to within RhinoMath.ZeroTolerance units (1e-12). (Inherited from Curve.)
	IsLinear(Double)	Test a curve to see if it is linear to within the custom tolerance. (Inherited from Curve.)
	IsPlanar()	Test a curve for planarity. (Inherited from Curve.)
	IsPlanar(Double)	Test a curve for planarity. (Inherited from Curve.)
	IsPolyline	Several types of Curve can have the form of a polyline including a degree 1 NurbsCurve, a PolylineCurve, and a PolyCurve all of whose segments are some form of polyline. IsPolyline tests a curve to see if it can be represented as a polyline. (Inherited from Curve.)
	IsShort(Double)	Used to quickly find short curves. (Inherited from Curve.)
	IsShort(Double, Interval)	Used to quickly find short curves. (Inherited from Curve.)
	IsSmoothManifoldEdge	For a manifold, non-boundary edge, decides whether or not the two surfaces on either side meet smoothly.
	IsValidWithLog	Determines if an object is valid. Also provides a report on errors if this object happens not to be valid. (Inherited from CommonObject.)
	LengthParameter(Double, Double)	Gets the parameter along the curve which coincides with a given length along the curve. A fractional tolerance of 1e-8 is used in this version of the function. (Inherited from Curve.)
	LengthParameter(Double, Double, Interval)	Gets the parameter along the curve which coincides with a given length along the curve. A fractional tolerance of 1e-8 is used in this version of the function. (Inherited from Curve.)
	LengthParameter(Double, Double, Double)	Gets the parameter along the curve which coincides with a given length along the curve. (Inherited from Curve.)
	LengthParameter(Double, Double, Double, Interval)	Gets the parameter along the curve which coincides with a given length along the curve. (Inherited from Curve.)
	MakeClosed	If IsClosed, just return true. Otherwise, decide if curve can be closed as follows: Linear curves polylinear curves with 2 segments, Nurbs with 3 or less control points cannot be made closed. Also, if tolerance > 0 and the gap between start and end is larger than tolerance, curve cannot be made closed. Adjust the curve's endpoint to match its start point. (Inherited from Curve.)
	MakeDeformable	If possible, converts the object into a form that can be accurately modified with "squishy" transformations like projections, shears, an non-uniform scaling. (Inherited from GeometryBase.)
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object.)
	MemoryEstimate	Computes an estimate of the number of bytes that this object is using in memory. (Inherited from GeometryBase.)
	NonConstOperation	For derived classes implementers. Defines the necessary implementation to free the instance from being const. (Inherited from Curve.)
	NormalizedLengthParameter(Double, Double)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function. (Inherited from Curve.)
	NormalizedLengthParameter(Double, Double, Interval)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function. (Inherited from Curve.)
	NormalizedLengthParameter(Double, Double, Double)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. (Inherited from Curve.)
	NormalizedLengthParameter(Double, Double, Double, Interval)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. (Inherited from Curve.)
	NormalizedLengthParameters(Double[], Double)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function. (Inherited from Curve.)
	NormalizedLengthParameters(Double[], Double, Interval)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function. (Inherited from Curve.)
	NormalizedLengthParameters(Double[], Double, Double)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. (Inherited from Curve.)
	NormalizedLengthParameters(Double[], Double, Double, Interval)	Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. (Inherited from Curve.)
	Offset(Plane, Double, Double, CurveOffsetCornerStyle)	Offsets this curve. If you have a nice offset, then there will be one entry in the array. If the original curve had kinks or the offset curve had self intersections, you will get multiple segments in the offset_curves[] array. (Inherited from Curve.)
	Offset(Point3d, Vector3d, Double, Double, CurveOffsetCornerStyle)	Offsets this curve. If you have a nice offset, then there will be one entry in the array. If the original curve had kinks or the offset curve had self intersections, you will get multiple segments in the offset_curves[] array. (Inherited from Curve.)
	OffsetNormalToSurface	Finds a curve by offsetting an existing curve normal to a surface. The caller is responsible for ensuring that the curve lies on the input surface. (Inherited from Curve.)
	OffsetOnSurface(BrepFace, Point2d, Double)	Offset a curve on a brep face surface. This curve must lie on the surface. This overload allows to specify a surface point at which the offset will pass. (Inherited from Curve.)
	OffsetOnSurface(BrepFace, Double, Double)	Offset this curve on a brep face surface. This curve must lie on the surface. (Inherited from Curve.)
	OffsetOnSurface(Surface, Point2d, Double)	Offset a curve on a surface. This curve must lie on the surface. This overload allows to specify a surface point at which the offset will pass. (Inherited from Curve.)
	OffsetOnSurface(Surface, Double, Double)	Offset a curve on a surface. This curve must lie on the surface. (Inherited from Curve.)
	OffsetOnSurface(BrepFace, Double[], Double[], Double)	Offset a curve on a brep face surface. This curve must lie on the surface. This overload allows to specify different offsets for different curve parameters. (Inherited from Curve.)
	OffsetOnSurface(Surface, Double[], Double[], Double)	Offset this curve on a surface. This curve must lie on the surface. This overload allows to specify different offsets for different curve parameters. (Inherited from Curve.)
	OnSwitchToNonConst	Is called when a non-const operation occurs. (Inherited from GeometryBase.)
	PerpendicularFrameAt	Return a 3d frame at a parameter. This is slightly different than FrameAt in that the frame is computed in a way so there is minimal rotation from one frame to the next. (Inherited from Curve.)
	PointAt	Evaluates point at a curve parameter. (Inherited from Curve.)
	PointAtLength	Gets a point at a certain length along the curve. The length must be non-negative and less than or equal to the length of the curve. Lengths will not be wrapped when the curve is closed or periodic. (Inherited from Curve.)
	PointAtNormalizedLength	Gets a point at a certain normalized length along the curve. The length must be between or including 0.0 and 1.0, where 0.0 equals the start of the curve and 1.0 equals the end of the curve. (Inherited from Curve.)
	PullToBrepFace(BrepFace, Double)	Pulls this curve to a brep face and returns the result of that operation. (Inherited from Curve.)
	PullToMesh	Makes a polyline approximation of the curve and gets the closest point on the mesh for each point on the curve. Then it "connects the points" so that you have a polyline on the mesh. (Inherited from Curve.)
	Rebuild	Rebuild a curve with a specific point count. (Inherited from Curve.)
	RemoveShortSegments	Looks for segments that are shorter than tolerance that can be removed. Does not change the domain, but it will change the relative parameterization. (Inherited from Curve.)
	Reverse	Reverses the direction of the curve. (Inherited from Curve.)
	Rotate	Rotates the object about the specified axis. A positive rotation angle results in a counter-clockwise rotation about the axis (right hand rule). (Inherited from GeometryBase.)
	Scale	Scales the object by the specified factor. The scale is centered at the origin. (Inherited from GeometryBase.)
	SetEdgeCurve(Int32)	Set 3d curve geometry used by a b-rep edge.
	SetEdgeCurve(Int32, Interval)	Set 3d curve geometry used by a b-rep edge.
	SetEndPoint	Forces the curve to end at a specified point. Not all curve types support this operation. (Inherited from Curve.)
	SetStartPoint	Forces the curve to start at a specified point. Not all curve types support this operation. (Inherited from Curve.)
	SetUserString	Attach a user string (key,value combination) to this geometry. (Inherited from GeometryBase.)
	Simplify	Returns a geometrically equivalent PolyCurve. The PolyCurve has the following properties All the PolyCurve segments are LineCurve, PolylineCurve, ArcCurve, or NurbsCurve. The Nurbs Curves segments do not have fully multiple interior knots. Rational Nurbs curves do not have constant weights. Any segment for which IsLinear() or IsArc() is true is a Line, Polyline segment, or an Arc. Adjacent Colinear or Cocircular segments are combined. Segments that meet with G1-continuity have there ends tuned up so that they meet with G1-continuity to within machine precision. (Inherited from Curve.)
	SimplifyEnd	Same as SimplifyCurve, but simplifies only the last two segments at "side" end. (Inherited from Curve.)
	SpanDomain	Get the domain of the curve span with the given index. Use the SpanCount property to test how many spans there are. (Inherited from Curve.)
	Split(IEnumerable(Double))	Splits (divides) the curve at a series of specified parameters. The parameter must be in the interior of the curve's domain. (Inherited from Curve.)
	Split(Double)	Splits (divides) the curve at the specified parameter. The parameter must be in the interior of the curve's domain. (Inherited from Curve.)
	Split(Brep, Double)	**Obsolete. ** Splits a curve into pieces using a polysurface. (Inherited from Curve.)
	Split(Surface, Double)	**Obsolete. ** Splits a curve into pieces using a surface. (Inherited from Curve.)
	Split(Brep, Double, Double)	Splits a curve into pieces using a polysurface. (Inherited from Curve.)
	Split(Surface, Double, Double)	Splits a curve into pieces using a surface. (Inherited from Curve.)
	TangentAt	Evaluates the unit tangent vector at a curve parameter. (Inherited from Curve.)
	ToNurbsCurve()	Constructs a NURBS curve representation of this curve. (Inherited from Curve.)
	ToNurbsCurve(Interval)	Constructs a NURBS curve representation of this curve. (Inherited from Curve.)
	ToPolyline(Int32, Int32, Double, Double, Double, Double, Double, Double, Boolean)	Gets a polyline approximation of a curve. (Inherited from Curve.)
	ToPolyline(Int32, Int32, Double, Double, Double, Double, Double, Double, Boolean, Interval)	Gets a polyline approximation of a curve. (Inherited from Curve.)
	ToString	Returns a string that represents the current object. (Inherited from Object.)
	Transform	Transforms the geometry. If the input Transform has a SimilarityType of OrientationReversing, you may want to consider flipping the transformed geometry after calling this function when it makes sense. For example, you may want to call Flip() on a Brep after transforming it. (Inherited from GeometryBase.)
	Translate(Vector3d)	Translates the object along the specified vector. (Inherited from GeometryBase.)
	Translate(Double, Double, Double)	Translates the object along the specified vector. (Inherited from GeometryBase.)
	Trim(Interval)	Removes portions of the curve outside the specified interval. (Inherited from Curve.)
	Trim(Double, Double)	Removes portions of the curve outside the specified interval. (Inherited from Curve.)
	Trim(CurveEnd, Double)	Shortens a curve by a given length (Inherited from Curve.)
	TrimIndices	Gets the indices of all trims associated with this edge.
	TryGetArc(Arc)	Try to convert this curve into an Arc using RhinoMath.ZeroTolerance. (Inherited from Curve.)
	TryGetArc(Arc, Double)	Try to convert this curve into an Arc using a custom tolerance. (Inherited from Curve.)
	TryGetArc(Plane, Arc)	Try to convert this curve into an Arc using RhinoMath.ZeroTolerance. (Inherited from Curve.)
	TryGetArc(Plane, Arc, Double)	Try to convert this curve into an Arc using a custom tolerance. (Inherited from Curve.)
	TryGetCircle(Circle)	Try to convert this curve into a circle using RhinoMath.ZeroTolerance. (Inherited from Curve.)
	TryGetCircle(Circle, Double)	Try to convert this curve into a Circle using a custom tolerance. (Inherited from Curve.)
	TryGetEllipse(Ellipse)	Try to convert this curve into an Ellipse within RhinoMath.ZeroTolerance. (Inherited from Curve.)
	TryGetEllipse(Ellipse, Double)	Try to convert this curve into an Ellipse using a custom tolerance. (Inherited from Curve.)
	TryGetEllipse(Plane, Ellipse)	Try to convert this curve into an Ellipse within RhinoMath.ZeroTolerance. (Inherited from Curve.)
	TryGetEllipse(Plane, Ellipse, Double)	Try to convert this curve into an Ellipse using a custom tolerance. (Inherited from Curve.)
	TryGetPlane(Plane)	Test a curve for planarity and return the plane. (Inherited from Curve.)
	TryGetPlane(Plane, Double)	Test a curve for planarity and return the plane. (Inherited from Curve.)
	TryGetPolyline(Polyline)	Several types of Curve can have the form of a polyline including a degree 1 NurbsCurve, a PolylineCurve, and a PolyCurve all of whose segments are some form of polyline. IsPolyline tests a curve to see if it can be represented as a polyline. (Inherited from Curve.)
	TryGetPolyline(Polyline, Double[])	Several types of Curve can have the form of a polyline including a degree 1 NurbsCurve, a PolylineCurve, and a PolyCurve all of whose segments are some form of polyline. IsPolyline tests a curve to see if it can be represented as a polyline. (Inherited from Curve.)

  Back to Top

Version Information

Supported in: 6.0.16224.21491, 5D58w

See Also

Reference

Rhino.Geometry Namespace